XC7A35T-L2FGG484E - 33,280-Cell Artix-7 FPGA | AMD
MPN: XC7A35T-L2FGG484E ✓ NakahandaXC7A35T-L2FGG484E Ulas
An FPGA is a semiconductor whose digital logic, routing, and I/O behavior are configured after manufacture. The XC7A35T belongs to the Artix-7 hierarchy, where 7-series fabric, programmable logic, block RAM, DSP resources, and high-speed I/O support parallel processing, control, data acquisition, communications, and embedded systems. Unlike a fixed-function microcontroller, an Artix-7 FPGA can implement multiple hardware functions concurrently while retaining reprogrammability and field-updatable logic.
The XC7A35T-L2FGG484E combines a 28 nm silicon implementation with 33,280 logic cells and 250 available I/O sites. Its 1.2 V to 3.3 V I/O range permits interfaces with common industrial and embedded logic levels, while the approximately 850 ps performance figure supports timing-sensitive pipelines and control logic. Sixteen transceiver lanes add useful connectivity for high-speed parallel interfaces, although protocol-specific line rates and signal-integrity limits require validation against the relevant AMD 7-series documentation.
The FGG484 package offers 484 ball-grid-array contacts on a 1 mm-class pitch and requires deliberate power, ground, decoupling, and high-speed routing discipline. The L2 speed grade should be evaluated against the required clock rate and timing margin rather than treated as a substitute for a complete Vivado timing report. The E suffix denotes the extended-industrial temperature option for this ordering code, while the exact limits and grade definitions should be confirmed in the manufacturer device documentation.
Typical applications include industrial data acquisition, machine vision, test and measurement, networked control, embedded signal processing, and low-cost communications infrastructure. The 250 I/O count is especially useful for parallel sensor interfaces, custom bus controllers, timing and trigger distribution, and designs that combine logic resources with high-speed transceivers. The 28 nm Artix-7 process also positions the device for designs requiring more parallelism than small general-purpose microcontrollers can provide.
PCB design should allocate separate supply rails for core and I/O, place high-frequency decoupling close to the BGA power balls, and provide a power plane capable of handling the approximately 5.9 W device-power target. A 484-BBGA assembly also demands careful escape routing and package-aware bitstream constraints. Use the AMD Artix-7 package pinout files and UG475 when assigning every power, ground, configuration, clock, and user I/O ball.
This page combines the exact device identity, package and resource data, same-footprint migration options, practical power and layout guidance, and structured comparisons. These engineering details help distinguish a true FGG484 migration from a merely similar Artix-7 device before a design reaches schematic capture, placement, or production release.
Mga alternatibo na pwedeng ilagay na XC7A35T-L2FGG484E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7A35T-L2FGG484E (parehas na form factor at footprint) — pagkakaiba sa Package, Process Technology, Speed Grade, Mounting Type, Operating Temperature.
XC7A35T-1FGG484I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7A35T-1FGG484C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7A35T-1FGG484E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7A35T-2FGG484C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7A35T-2FGG484I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7A35T-L2FGG484E Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Artix-7 field-programmable gate array |
| Programmable Logic Cells | 33,280 cells |
| Logic Resource Count | 1,843,200 |
| I/O Count | 250 I/O |
| High-Speed Transceiver Lanes | 16 lanes |
| Process Technology | 28 nm |
| Core Supply Voltage | 0.9 V |
| I/O Voltage Range | 1.2 V to 3.3 V |
| Thermal Design Power | 5.9 W |
| Packhaging | 484-BBGA, FGG484, 1 mm pitch class |
| Ball-Grid-Array Pin Count | 484 balls |
| Package Ball Pitch | 1 mm |
| Performance Figure | 850 ps |
| Device Dimension | 2.6 mm |
| Temperature Grade | Extended industrial grade |
| Speed Grade | L2 |
Gabay sa Pin Configuration ng XC7A35T-L2FGG484E 1 mm
Pin configuration para sa XC7A35T-L2FGG484E (1 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7A35T-L2FGG484E.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7A35T-L2FGG484E ay nararapat para sa 6 aplikasyons: Industrial Data Acquisition, Machine Vision Processing, Test and Measurement Instrumentation, Embedded Signal Processing, Programmable Network Interface, Embedded Control Platform.
Industrial Data Acquisition
The XC7A35T-L2FGG484E fits parallel industrial data-acquisition systems requiring deterministic timing and numerous sensor inputs. Its 33,280 programmable logic cells can implement acquisition pipelines, filtering, trigger control, and communication logic, while 250 I/O sites provide interfaces for sensors, counters, digital buses, and control signals. The 1.2 V to 3.3 V I/O range supports common embedded and industrial logic families. Place the FPGA between sensors and a communications processor, use clocks with low jitter, and validate every input threshold in Vivado. The approximately 5.9 W power target makes power-plane capacity and thermal spreading important. For production timing, use the L2 device speed grade and verify acquisition latency after placement and routing.
Inirekomenda
Machine Vision Processing
The XC7A35T-L2FGG484E is suitable for machine-vision preprocessing where parallel pixel data must be captured, filtered, and transferred with predictable latency. Programmable logic can perform thresholding, line correction, windowing, and format conversion, while the 16 transceiver lanes can support high-speed parallel links when the selected I/O resources and board topology permit. Its 250 I/O sites accommodate camera control, synchronization, and auxiliary interfaces. Use dedicated clock inputs for pixel timing and constrain all high-speed paths according to the AMD 7-series timing guidance. The L2 grade provides additional timing margin for pipelined image paths, but final throughput depends on resource mapping, memory inference, and transceiver configuration.
Inirekomenda
Test and Measurement Instrumentation
The XC7A35T-L2FGG484E supports programmable test and measurement instruments that coordinate timing, pattern generation, data capture, and instrument control. Its 33,280 logic cells allow several channels of acquisition and sequencing logic to operate concurrently, while 250 I/O sites provide broad connectivity to test fixtures, trigger ports, and control buses. The 1.2 V to 3.3 V I/O capability simplifies integration with mixed-voltage test electronics. Implement clock-domain crossings with AMD-recommended methods, place boundary-scan and configuration access in the design plan, and reserve sufficient decoupling and copper area for the approximately 5.9 W device-power target. Timing-sensitive instrumentation should close against the L2 speed grade in the selected Vivado version.
Inirekomenda
Embedded Signal Processing
The XC7A35T-L2FGG484E can implement parallel signal-processing chains for communications, control, and specialized sensors. The Artix-7 fabric allows filtering, correlation, digital modulation, and control pipelines to be combined with dedicated block RAM and DSP resources rather than executed sequentially on a microcontroller. The 28 nm process supports a compact, energy-conscious implementation, while 250 I/O sites connect converters, memory, and external interfaces. Map arithmetic operations to DSP resources and use registered interfaces to preserve timing margin. The 16 transceiver lanes can accelerate parallel data movement, but their use requires correct clocking, lane assignment, and signal-integrity analysis. Validate throughput and latency using an implemented design rather than logic-cell estimates alone.
Inirekomenda
Programmable Network Interface
The XC7A35T-L2FGG484E fits network-interface and protocol-conversion designs that benefit from parallel packet processing and flexible I/O. Programmable logic can implement framing, checksums, headers, traffic shaping, and custom serial interfaces, while the 16 transceiver lanes support high-speed parallel connectivity. The 250 I/O sites allow concurrent memory, management, and status interfaces. Use the clock-capable pins for the principal source-synchronous interfaces, constrain input and output delays, and account for package-bounce and channel-skew effects during signal-integrity review. The L2 speed grade can improve timing closure on critical datapaths. Because network throughput depends on the selected transceivers, RAM configuration, and board-level signal integrity, verify performance with representative traffic and post-route timing.
Inirekomenda
Embedded Control Platform
The XC7A35T-L2FGG484E can serve as the programmable control core of an embedded platform combining real-time sequencing, communications, and auxiliary functions. A 33,280-cell Artix-7 device allows state machines, protocol engines, health monitoring, and interface logic to coexist without partitioning the design into several fixed-function devices. The 1.2 V to 3.3 V I/O range supports sensors, actuators, and embedded processors, while the 484-BBGA package requires disciplined layer allocation and escape routing. Place decoupling and power distribution on multiple layers, preserve configuration access, and use AMD constraints to identify any difficult BGA routes. The approximately 5.9 W thermal target should be checked under worst-case utilization, and the L2 grade should be retained when deterministic timing is essential.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7A35T-L2FGG484E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7A35T-1FGG484I | XC7A35T-1FGG484C | XC7A35T-1FGG484E | XC7A35T-2FGG484C | XC7A35T-2FGG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FGG484 484-BBGA | FGG484 484-BBGA | FGG484 484-BBGA | FGG484 484-BBGA | FGG484 484-BBGA | FGG484 484-BBGA |
| Device Family | Artix-7 XC7A35T | Artix-7 XC7A35T | Artix-7 XC7A35T | Artix-7 XC7A35T | Artix-7 XC7A35T | Artix-7 XC7A35T |
| Speed Grade | L2 | 1 | 1 | 1 | 2 | 2 |
| Temperature Option | E - extended industrial | I - industrial | C - commercial | E - extended industrial | C - commercial | I - industrial |
| Programmable Logic Cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells |
| I/O Count | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O |
| Transceiver Lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V |
| I/O Voltage Range | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V |
Pangunahing mga Pagkakaiba
- Higher L2 speed grade (kumpara saXC7A35T-1FGG484I)
- Extended-industrial E option (kumpara saXC7A35T-1FGG484I)
- Commercial-temperature option (kumpara saXC7A35T-2FGG484C)
Talaan ng Disenyo
Budget the core and I/O rails separately because the XC7A35T-L2FGG484E uses a 0.9 V core supply, supports 1.2 V to 3.3 V I/O, and carries an approximately 5.9 W thermal design-power target. Place high-frequency decoupling directly beneath or as close as practical to the relevant BGA power balls, use multiple plane connections, and verify layer transitions with a power-integrity model. Regulator capacity should include startup current, configured transceiver activity, and worst-case logic utilization rather than nominal idle current alone.
Treat the 484-BBGA package as a routing-constrained component. Use the AMD Artix-7 package-device pinout files and UG475 to assign every ball, then plan layer changes before placement. Reserve clock-capable pins, configuration pins, power balls, and ground balls according to device rules. Run detailed escape routing for high-speed interfaces and avoid splitting return paths under switching or transceiver signals. Post-layout extraction and implementation-level timing analysis should be completed before releasing fabrication data.
Estimated: using the listed approximately 5.9 W device-power target, a junction-to-ambient rise of 30 C would correspond to about 0.197 C/W, while a 50 C rise would correspond to about 0.118 C/W. These are design-planning estimates, not manufacturer thermal-resistance specifications. Use copper spreading, a balanced multilayer stack-up, and the actual package thermal data to determine whether the device requires additional cooling. Re-evaluate the estimate after placement because activity-dependent power can vary substantially from the planning target.
A common mistake is treating every FGG484 Artix-7 ordering code as an unconditional drop-in replacement. The 7A35T speed grade and E temperature suffix affect timing and environmental suitability, while a different density can change resource availability even if the package remains compatible. After selecting a replacement, update the Vivado part designation, regenerate constraints, compare resource utilization, review clock and transceiver assignments, and complete post-route timing. Avoid reusing a bitstream without confirming that the tool permits the selected device and configuration.
Impormasyon ng Pagsunod sa Kautusan
The industrial FPGA category is not an automotive-qualified product category. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current AMD product documentation or the supplier.