XC7Z010-L1CLG400I - Dual-Core ARM Cortex-A9 SoC | AMD
MPN: XC7Z010-L1CLG400I ✓ NakahandaXC7Z010-L1CLG400I Ulas
A system on chip, or SoC, combines a hard processor subsystem with programmable logic and shared interfaces on one device. In the Zynq-7000 hierarchy, the ARM Cortex-A9 subsystem executes operating-system and application software, while the Artix-7 FPGA fabric implements parallel hardware, custom peripherals, signal processing, or real-time control functions. This integration reduces the number of discrete devices and allows software-controlled hardware accelerators to exchange data with the processor system.
The XC7Z010-L1CLG400I provides 28K FPGA logic cells and 667 MHz ARM processing in one package. The dual-core Cortex-A9 configuration supports parallel operating-system workloads, while CoreSight provides integrated debug visibility. A 256 KB RAM block is associated with the device in the Zynq-7000 product family. The 400-CSPBGA package offers a high pin count suitable for exposing processor, FPGA, memory, and high-speed I/O resources.
The device combines a hard ARM Cortex-A9 processing subsystem with an Artix-7 FPGA fabric rather than implementing the processor entirely in programmable logic. This architecture allows deterministic hardware blocks to run concurrently with software workloads. High-speed memory-mapped interfaces connect the processor to FPGA fabric, enabling functions such as hardware-assisted filtering, protocol handling, data acquisition, and control when supported by the selected design tools and device configuration.
Typical uses include industrial control, machine vision, communications infrastructure, test and measurement, embedded networking, and sensor-processing systems. The ARM processor can manage operating-system tasks and device control, while the FPGA fabric accelerates parallel logic. In a camera-based inspection system, for example, programmable logic can acquire and pre-process image data while the processor performs higher-level analysis and communications.
PCB design requires careful attention to the 400-ball package, multilayer-routing rules, power integrity, and high-speed differential signals. Use the manufacturer package pinout files and the applicable Zynq-7000 design guidance when assigning balls and planning power, ground, clock, and I/O connections. Configuration, programming interfaces, decoupling, and board-level test access should be validated in the Vivado design flow before fabrication.
This page combines the device architecture, package information, drop-in candidates, application guidance, and practical design considerations. The comparison tables and migration notes are intended to shorten engineering evaluation while preserving the need for package, timing, resource, and temperature-grade verification before any replacement is approved.
Mga alternatibo na pwedeng ilagay na XC7Z010-L1CLG400I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z010-L1CLG400I (parehas na form factor at footprint) — pagkakaiba sa Package, Device Type, FPGA Logic Cells, Processor Core, Package Dimensions.
XC7Z010-1CLG400C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z010-2CLG400I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XA7Z010-1CLG400I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z020-1CLG400I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z010-L1CLG400I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Zynq-7000 programmable system on chip |
| Processor Core | Dual-core ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| FPGA Family | Artix-7 |
| FPGA Logic Cells | 28K logic cells |
| On-Chip RAM | 256 KB |
| Debug Support | CoreSight |
| Packhaging | 400-CSPBGA |
| Package Body Size | 17 mm x 17 mm |
| Package Pin Count | 400 balls |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Gabay sa Pin Configuration ng XC7Z010-L1CLG400I 400 balls
Pin configuration para sa XC7Z010-L1CLG400I (400 balls package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z010-L1CLG400I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z010-L1CLG400I ay nararapat para sa 6 aplikasyons: Industrial Machine Control, Machine Vision and Inspection, Industrial Communications Gateway, Test and Measurement Equipment, Sensor Processing and Edge IoT, Embedded Security and Surveillance.
Industrial Machine Control
The XC7Z010-L1CLG400I is suitable for machine-control systems that must coordinate real-time I/O with higher-level operating-system functions. Its dual-core ARM Cortex-A9 subsystem operates at 667 MHz and can run control, diagnostics, communications, and supervisory logic, while the 28K-cell Artix-7 fabric can implement deterministic timing, pulse generation, or parallel condition-monitoring circuits. Using both processors and programmable logic in one 400-CSPBGA device can reduce inter-chip communication compared with a discrete processor-plus-FPGA architecture. The design must still validate logic utilization, available user I/O, power sequencing, and the exact industrial temperature grade against the enclosure and process conditions.
Inirekomenda
Machine Vision and Inspection
The XC7Z010-L1CLG400I can divide a machine-vision pipeline between FPGA logic and the dual ARM Cortex-A9 processor. The Artix-7 fabric's 28K logic cells can support parallel image preprocessing, pixel formatting, thresholding, or data capture, while the 667 MHz processor handles control flow, classification, storage management, and factory-network communication. Combining these functions on one SoC can reduce data movement between separate devices and simplify system integration. The exact camera interface, line rate, image buffer, and I/O requirement must fit within the device's available resources, and board-level signal integrity should be evaluated with the selected sensor and connector.
Inirekomenda
Industrial Communications Gateway
The XC7Z010-L1CLG400I fits gateways that combine protocol processing with a hosted operating system. The dual-core ARM Cortex-A9 processor at 667 MHz can manage network stacks, routing, security services, and configuration, while the Artix-7 FPGA fabric can accelerate packet handling or implement specialized serial interfaces. The 400-CSPBGA package provides extensive ball access for memory, Ethernet PHY interfaces, and other external connectivity. A production design should check the exact supported memory interfaces, I/O count, transceiver requirements, and thermal conditions. Configuration must use the AMD toolchain and device settings validated for the CLG400 package before release.
Inirekomenda
Test and Measurement Equipment
The XC7Z010-L1CLG400I is appropriate for test equipment that needs flexible acquisition logic alongside an embedded control processor. Programmable logic can implement timing units, trigger logic, counters, and parallel data paths, while the dual Cortex-A9 cores handle instrument control, analysis, calibration, and user interfaces. Its 28K logic cells provide enough FPGA resources for compact embedded instruments, although complex multichannel designs may require a larger Zynq device. The design should account for analog front-end settling, clock jitter, external memory behavior, and signal termination. Use the package pinout files and timing-constrained Vivado project to verify every high-speed interface.
Inirekomenda
Sensor Processing and Edge IoT
The XC7Z010-L1CLG400I can serve as an edge-processing node when sensors produce data faster or more deterministically than software alone can handle. The 28K-cell FPGA fabric can filter, count, correlate, or buffer sensor streams, while the 667 MHz dual-core ARM subsystem applies higher-level analytics and manages connectivity. A single-package implementation may reduce board area compared with separate MCU and FPGA arrangements, although the 400-CSPBGA still requires multilayer PCB design. Validate sensor timing, I/O voltage compatibility, memory capacity, and the device's power budget. Secure boot, peripheral configuration, and application deployment should also be planned within the Zynq software-development workflow.
Inirekomenda
Embedded Security and Surveillance
The XC7Z010-L1CLG400I supports embedded surveillance designs that require simultaneous video processing and system control. Programmable logic can perform motion detection, pixel-domain filtering, or trigger generation, while the dual-core ARM Cortex-A9 processor manages storage, network communication, device identity, and application services. Integrating the processor and 28K-cell FPGA fabric on one SoC can reduce duplicated interfaces and accelerate parallel video tasks. The specific camera resolution, frame rate, codec complexity, and storage bandwidth determine whether the XC7Z010 is sufficient; larger designs may move to XC7Z020. Validate thermal performance, confidentiality requirements, boot behavior, and long-term availability for the chosen ordering code.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z010-L1CLG400I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z010-1CLG400I | XC7Z010-1CLG400C | XC7Z010-2CLG400I | XA7Z010-1CLG400I | XC7Z020-1CLG400I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA |
| Processor | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz | 667 MHz | 667 MHz | Not stated | 667 MHz | Not stated |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| FPGA Logic Cells | 28K logic cells | 28K logic cells | 28K logic cells | 28K logic cells | 28K logic cells | Greater capacity than 28K logic cells |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| On-Chip RAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | Not stated |
| Ordering Qualification | L1CLG400I | -1CLG400I | -1CLG400C | -2CLG400I | XA automotive-family ordering code | XC7Z020-1CLG400I |
| Package Body Size | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm |
Pangunahing mga Pagkakaiba
- Combines ARM software execution and Artix-7 programmable logic in one SoC (kumpara saXC7Z020-1CLG400I)
- Closest ordering-code match within the XC7Z010 CLG400 family (kumpara saXC7Z010-1CLG400I)
- Maintains the same package and core device family while offering a different qualification path (kumpara saXA7Z010-1CLG400I)
- Same CLG400 migration platform without the XC7Z020 capacity increase (kumpara saXC7Z020-1CLG400I)
Talaan ng Disenyo
Assign the 400-CSPBGA connections directly from the AMD CLG400 package files in TXT or CSV format. Separate processor, FPGA I/O, auxiliary, and memory-interface supplies into their specified power domains, then connect each domain to the required plane through the placement and decoupling network defined in the AMD design guidance. Avoid substituting a generic BGA escape pattern because the XADC, configuration pins, clock inputs, and high-speed I/O have prescribed connection and decoupling requirements.
Use the package ball assignments and device-speed designation when constraining the design in Vivado. The target uses an L1 ordering position, while related devices use -1, -2, C, I, or automotive-family codes; changing only the ordering code may alter timing, power, temperature, or qualification assumptions. Complete post-route timing analysis for every clock domain and peripheral interface, and avoid treating the 667 MHz processor figure as a substitute for FPGA fabric timing analysis.
Plan the power tree for simultaneous processor, memory, and programmable-logic activity rather than the processor's 667 MHz clock alone. Follow the manufacturer guidance for supply sequencing, rail ramp limits, bypass-capacitor placement, and power-source impedance. Estimated system dissipation must be calculated from the selected Vivado utilization and operating activity because the 28K-cell fabric and external memory activity can materially affect total demand. Validate the result across startup, idle, processing, and worst-case logic activity.
Do not approve a migration solely because two devices use the CLG400 package. Compare the complete ordering codes, processor and memory subsystem, FPGA resources, I/O standards, power characteristics, operating-temperature grade, qualification, software constraints, and lifecycle state. The AMD package-device pinout files and UG865 provide the authoritative package data, while timing must be re-established for the new target device in the Vivado project.
Impormasyon ng Pagsunod sa Kautusan
Compliance must be confirmed from current AMD documentation for the exact XC7Z010-L1CLG400I ordering code. The XA7Z010 family is considered separately for automotive qualification.