XC7Z030-1FBG484C - Dual Cortex-A9 Zynq-7000 SoC | AMD
MPN: XC7Z030-1FBG484C ✗ Tapus ng BuhayXC7Z030-1FBG484C Ulas
A Zynq system-on-chip is a heterogeneous embedded computing device that combines an application processor subsystem, programmable logic, memory interfaces, and high-speed serial connectivity. The XC7Z030 belongs to the Zynq-7000 family, where the ARM Cortex-A9 subsystem executes operating systems or bare-metal software while the FPGA fabric accelerates parallel logic, fixed-function datapaths, image processing, and interface termination. This integration reduces inter-chip data transfers and permits hardware-assisted software partitioning.
The device provides dual 32-bit ARM Cortex-A9 processor cores, CoreSight debug capability, and approximately 125,000 FPGA logic cells. Its processor performance grade is rated at 667 MHz. The 484-FCBGA package provides 484 electrical contacts and a 23 x 23 mm body, making dense PCB layout, multilayer routing, thermal management, and BGA assembly essential. The suffix identifies a 667 MHz grade in the commercial-temperature configuration.
The architecture supports hardware/software co-design because control logic, parallel pipelines, memory controllers, and peripheral interfaces can be implemented in the programmable fabric, while the processor subsystem manages control flow and higher-level functions. This division can improve throughput for tasks such as protocol handling, data acquisition, encryption, video pipelines, and network packet processing. FPGA logic can execute parallel operations concurrently, while the processor is better suited to operating systems, control software, and sequential application logic.
Typical uses include industrial control, communications infrastructure, embedded vision, instrumentation, aerospace and defense systems, and high-performance embedded processing. The combination is especially useful when a product needs deterministic programmable logic alongside a familiar processor software environment. It can also consolidate functions that otherwise require an FPGA, processor, and external interface devices on separate boards.
PCB implementation should follow the AMD package placement and pinout files, provide adequate power and ground distribution, and account for the large BGA escape-routing area. Validate the complete power architecture, high-speed routing, thermal performance, and assembly process before production because package complexity directly affects manufacturability and first-pass success.
This product page consolidates the processor, FPGA, package, and application characteristics into an engineering-focused reference. It also distinguishes same-package speed and temperature options, highlights replacement constraints, and organizes comparison and design guidance for selecting the appropriate Zynq-7000 device.
Mga alternatibo na pwedeng ilagay na XC7Z030-1FBG484C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z030-1FBG484C (parehas na form factor at footprint) — pagkakaiba sa Logic Cells, Device Type, Package, Package Dimensions, Processor Core.
XC7Z030-1FBG484I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z030-2FBG484I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z030-3FBG484E
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z030-1FBG484CES9919
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z030-1FBG484C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Zynq-7000 system-on-chip |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Processor Maximum Frequency | 667 MHz |
| Processor Architecture | 32-bit ARM |
| Debug Support | CoreSight |
| FPGA Family | Kintex-7 |
| Logic Cells | Approximately 125,000 cells |
| Package Type | 484-FCBGA |
| Package Dimensions | 23 x 23 mm |
| Bilang ng Pin | 484 pins |
| Uri ng Pagpapasok | Surface mount |
| Volte ng Pagbibigay | 1.2 V / 3.3 V |
| High-Speed Serial Transceivers | 4 GTX transceivers |
Gabay sa Pin Configuration ng XC7Z030-1FBG484C 23 x 23 mm
Pin configuration para sa XC7Z030-1FBG484C (23 x 23 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z030-1FBG484C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z030-1FBG484C ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, Communications and Network Equipment, Embedded Vision and Image Processing, Aerospace and Defense Systems, Test and Measurement Systems, Security and Data Processing.
Industrial Control and Automation
The XC7Z030-1FBG484C fits industrial controllers that need both deterministic I/O handling and a general-purpose operating environment. The dual 667 MHz ARM Cortex-A9 cores can run control software, diagnostics, communications, and supervisory logic, while the approximately 125,000 Kintex-7 logic cells can implement parallel sampling, encoder processing, motor-control timing, or custom interface protocols. This division lets designers place time-critical functions directly in programmable logic instead of relying only on software timing. The 484-FCBGA package still requires careful multilayer escape routing, solid power distribution, and controlled thermal rise. Industrial suitability must be confirmed against the selected grade and the system ambient-temperature range before release.
Inirekomenda
Communications and Network Equipment
The XC7Z030-1FBG484C is useful in communication equipment where protocol termination, packet handling, and supervisory software must coexist in a compact design. Four GTX transceivers support high-speed serial connectivity, while the FPGA fabric can implement parallel framing, scrambling, filtering, and interface timing. The dual Cortex-A9 subsystem can manage configuration, management protocols, and higher-level traffic processing at up to the device's 667 MHz grade. Because performance depends heavily on the selected transceiver speed, memory interface, and board-level channel design, confirm those specifications in the AMD device documentation. Signal-integrity validation and reference-clock planning are essential before production.
Inirekomenda
Embedded Vision and Image Processing
The XC7Z030-1FBG484C supports embedded vision designs that combine sensor capture, pixel-level processing, and application control. Approximately 125,000 FPGA logic cells can implement parallel stages such as filtering, thresholding, color conversion, and frame timing, while the dual 667 MHz Cortex-A9 cores handle image algorithms, buffering control, and external communication. Partitioning work between programmable logic and software can reduce serial transfers and improve deterministic throughput. Actual frame rate depends on image resolution, pixel format, memory bandwidth, and the number of processing stages assigned to the fabric. Designers should use the AMD package files, memory interface guidance, and resource reports to produce a realistic implementation.
Inirekomenda
Aerospace and Defense Systems
The XC7Z030-1FBG484C can support embedded aerospace, defense, and rugged processing systems that benefit from programmable hardware alongside an ARM processor. The processor subsystem executes control and supervisory software, while the Kintex-7 fabric can accelerate signal conditioning, navigation data paths, encryption-related operations, or deterministic I/O. Four GTX transceivers are available for high-speed connectivity, subject to the speed ratings and design constraints defined for the device. The commercial -1FBG484C temperature classification must be checked against the deployment environment; an industrial suffix alone should not be treated as proof of aerospace qualification. Radiation, reliability, and qualification requirements must be evaluated separately for the complete end product.
Inirekomenda
Test and Measurement Systems
The XC7Z030-1FBG484C is well suited to modular test and measurement equipment where flexible acquisition logic and embedded analysis must share one platform. FPGA resources can implement parallel ADC or DAC channels, trigger logic, digital pattern generation, and timing control, while the dual 667 MHz Cortex-A9 cores run control software, calibration routines, and user interfaces. This combination allows measurement-specific datapaths to evolve without moving every function into a general-purpose processor. Signal integrity, sampling accuracy, and usable bandwidth are governed by the external analog and memory design as well as the SoC. The 484-FCBGA footprint therefore requires a high-layer-count PCB with disciplined power, return-path, and clock routing.
Inirekomenda
Security and Data Processing
The XC7Z030-1FBG484C supports security-oriented embedded systems that combine a conventional processor execution environment with configurable hardware pipelines. The Kintex-7 fabric can implement parallel bit operations, checksum engines, compression stages, protocol checks, or hardware-assisted cryptographic datapaths, while the Cortex-A9 cores perform control and policy functions. The four GTX transceivers can carry high-speed data into the programmable fabric when their device-specific operating limits are met. Because an FPGA implementation does not automatically constitute a certified cryptographic solution, security claims require separate algorithm, key-management, side-channel, and validation work. Board-level isolation, secure boot, and tamper controls should be treated as separate system requirements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z030-1FBG484C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z030-1FBG484I | XC7Z030-2FBG484I | XC7Z030-3FBG484E | XC7Z030-1FBG484CES9919 |
|---|---|---|---|---|---|
| Package | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) - same | 484-FCBGA (23 x 23 mm) - same | 484-FCBGA (23 x 23 mm) - same | 484-FCBGA (23 x 23 mm) - same |
| Brand | AMD | AMD | AMD | AMD | AMD |
| Processor Core | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz | 667 MHz | 800 MHz | 1 GHz | 667 MHz |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | Approximately 125,000 cells | Approximately 125,000 cells | Approximately 125,000 cells | Approximately 125,000 cells | Approximately 125,000 cells |
| Temperature Designation | Commercial-temperature suffix C | Industrial-temperature suffix I | Industrial-temperature suffix I | Extended-temperature suffix E | Commercial-temperature suffix C with extended ordering code |
Pangunahing mga Pagkakaiba
- Maintains the target 667 MHz speed grade with an industrial-temperature option (kumpara saXC7Z030-1FBG484I)
- Lower processor frequency than the same-package -2 option (kumpara saXC7Z030-2FBG484I)
- Lower processor frequency than the same-package -3 option (kumpara saXC7Z030-3FBG484E)
- Base 667 MHz configuration without the extended ordering suffix (kumpara saXC7Z030-1FBG484CES9919)
Talaan ng Disenyo
Use the AMD XC7Z30-FBG484 package placement diagram and official Zynq-7000 package files as the authority for every ball assignment. The 23 x 23 mm FCBGA requires a multilayer escape-routing strategy, and signal integrity depends on continuous return paths beneath high-speed interfaces. Validate ball-to-ball transitions, power-plane splits, reference-plane continuity, and BGA assembly constraints before releasing fabrication data.
The listed operating supplies are 1.2 V and 3.3 V, but the complete power tree must follow the AMD device power requirements rather than relying only on these rail names. Separate high-current processor and I/O supplies appropriately, place decoupling capacitance close to device balls, and verify sequencing, startup current, droop, and fault behavior across the configured processor and fabric load. Estimated dissipation is not appropriate until utilization, voltage, clocking, and temperature are known.
Evaluate thermal performance with the processor operating at 667 MHz and with the selected design's actual FPGA utilization. AMD package thermal guidance should be applied using the intended board stack-up and copper area. Check junction-temperature margin at the highest ambient temperature and worst-case workload. If the margin is inadequate, improve layer spreading, reduce avoidable switching activity, or consider a different package configuration rather than relying on airflow alone.
Plan high-speed GTX and memory interfaces against the documented reference clock, trace impedance, insertion-loss, and crosstalk requirements. Use the AMD design-assistance materials and complete IBIS or equivalent channel analysis where required. Keep clocks and high-speed differential pairs away from noisy power-regulator switches, maintain appropriate return-path continuity beneath the BGA, and validate the assembled board rather than treating simulation only as a layout checklist.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. These fields remain unknown rather than being inferred from the manufacturer or device family.