ADM3485EAR vs ADM3485EARZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM3485EAR tarafından Analog Devices ve ADM3485EARZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ADM3485EAR | ADM3485EARZ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Veri Hızı | 12 Mbps | — |
| ESD Protection | ±15 kV | ±15 kV |
| Protocol Support | TIA/EIA RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Bus Nodes | 32 nodes | — |
| Receiver Fail-Safe Behavior | Open-circuit fail-safe design | — |
| Low-Power Shutdown | Supported | — |
| Bus Configuration | Multipoint differential bus | Multipoint bus transmission |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Operating Voltage | [DATA_NEEDED: operating voltage range] | — |
| Besleme Akımı | [DATA_NEEDED: supply current] | — |
| Kapatma Akımı | [DATA_NEEDED: shutdown current] | [DATA_NEEDED: Shutdown current] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: Common-mode voltage range] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 12 Mbps |
| Communication Standard | — | EIA RS-485 and TIA/EIA RS-422 |
| Driver Enable Control | — | Yes |
| Receiver Enable Control | — | Yes |
| Low-Power Operation | — | Yes |
| Durağan Akım | — | [DATA_NEEDED: Quiescent current] |
| Receiver Input Resistance | — | [DATA_NEEDED: Receiver input resistance] |