BTS4130QGAXUMA1 vs BTS5014SDAAUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS4130QGAXUMA1 tarafından Infineon ve BTS5014SDAAUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS4130QGAXUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Birim Fiyat (USD) | $1,86 | — |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | 1 |
| Ağ Yapısı | High-Side N-Channel MOSFET with charge pump | N-Channel vertical power MOSFET with charge pump |
| Continuous Load Current per Channel | 2.1 A | — |
| On-State Resistance R_DS(on) per Channel | 130 mOhm typical | — |
| İşletim Besleme Gerilimi | 6 V to 18 V (extended to 28 V transient) | 5 V to 28 V (load-dump tolerant to 41 V) |
| Overvoltage Clamp (Load Dump) | 45 V typical | — |
| Quiescent Current (Standby) | [DATA_NEEDED: quiescent current value] | — |
| İşletim Sıcaklığı Aralığı | -40 C to +150 C junction | -40 C to +150 C (junction) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery | — |
| Diagnostic Output | Status feedback pin | — |
| Paket | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 3 (per JEDEC J-STD-020) | — |
| RoHS Durumu | Compliant | Compliant |
| Nominal Load Current | — | 6 A |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Akım Sınırı | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |