BTS700121ESPXUMA2 vs BTS70021EPPXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS700121ESPXUMA2 tarafından Infineon ve BTS70021EPPXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Infineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 ✓ AktifInfineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ AktifÖzellik Karşılaştırması
| Parametre | BTS700121ESPXUMA2 | BTS70021EPPXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Fonksiyon | Power Switch / Driver 1:1 N-Channel | — |
| Ağ Yapısı | High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Continuous Load Current | 31.3 A | — |
| Family | PROFET (Protected FET) | — |
| Nominal Supply Voltage | 13.5 V | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Ron typ @ 25 C] | — |
| Number of Channels | 1 | — |
| Paket | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) | PG-TSDSO-14-22 (exposed pad) |
| Number of Terminals | 24 | — |
| Terminal Pitch | 0.65 mm | — |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı Aralığı | -40 C to +150 C | -40 C to +150 C junction |
| Max Junction Temperature | 150 C | — |
| Protection Features | Overload, short-circuit, over-temperature, reverse battery, ground loss | — |
| Diagnostic Output | Analog current sense (IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | Yes (on-state and off-state) |
| RoHS Durumu | Compliant | Compliant (Green Product) |
| Product Family | — | PROFET+2 12V |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Qualification | — | AEC-Q100 automotive qualified |