BTS70402EPGXUMA1 vs BTS426L1E3062AAUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS70402EPGXUMA1 tarafından Infineon ve BTS426L1E3062AAUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS70402EPGXUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fonksiyon | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | — |
| Çıkış Konfigürasyonu | High-side, N-channel MOSFET | High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| İşletim Sıcaklığı Aralığı | -40 °C to +150 °C junction | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| Paket | PG-TSDSO-14 (exposed thermal pad) | PG-TO263-5-2 (DPAK-5, surface mount) |
| Montaj Türü | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | Classic PROFET 12V |
| Ağ Yapısı | — | N-Channel Vertical Power FET with Charge Pump |
| Çıkış Sayısı | — | 1 |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Yes (ST pin, ground-referenced feedback) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Technology | — | Smart SIPMOS, monolithic |
| RoHS Durumu | — | Compliant |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |