EPC2LC20 vs EPC21LC20 Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC2LC20 tarafından Altera ve EPC21LC20 tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC2LC20 | EPC21LC20 |
|---|---|---|
| Marka | Altera | Intel |
| Kategori | Memory ICs | Memory ICs |
| Yaşam Döngüsü Durumu | NRND | Aktif |
| Bellek Türü | Non-volatile configuration PROM | Serial Configuration PROM (Flash-based, in-system programmable) |
| Bellek Boyutu | 1.6 Mbit | — |
| Configuration Interface | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE | — |
| Programming Interface | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant | IEEE 1149.1 (JTAG) |
| Supply Voltage VCC | 3.0 V to 3.6 V (3.3-V operation) | — |
| ISP Voltage Range | 5.0 V or 3.3 V | — |
| Supported FPGA Families | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 | — |
| Cascade Support | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams | — |
| Paket | 20-pin PLCC (J-lead, 9x9 mm) | — |
| Montaj Türü | Surface Mount | Surface Mount (PLCC socket or solder) |
| İşletim Sıcaklığı | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] | — |
| RoHS Durumu | Non-Compliant (original Altera Pb-containing part) | [DATA_NEEDED: confirm from Altera product page] |
| Lead-Free Version | EPC2LC20N available as lead-free equivalent | — |
| Programming Support | Altera Programming Unit (APU), Quartus II, JTAG programmer | — |
| Boundary-Scan | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG | — |
| Density | — | 2 Mb (2,097,152 bits) |
| Configuration Mode Supported | — | Serial (PS) for Altera SRAM-based LUT FPGAs |
| Maximum DCLK Frequency | — | 10 MHz |
| Access Time | — | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] |
| Program/Erase Endurance | — | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] |
| Operating Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Standby Current | — | [DATA_NEEDED: ICCSB value] |
| Active Read Current | — | [DATA_NEEDED: ICC active current] |
| Operating Temperature (commercial) | — | 0 °C to +70 °C (LC suffix) |
| Operating Temperature (industrial) | — | [DATA_NEEDED: -40 to +85 °C for LI variant] |
| Paket / Kas | — | 20-pin PLCC (J-lead, JEDEC MS-018) |
| MSL Seviyesi | — | [DATA_NEEDED: confirm moisture sensitivity level] |
| Lead-Free (Pb-free) | — | [DATA_NEEDED: confirm] |
| Compatible FPGA Families | — | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) |
| JTAG Boundary-Scan Compliant | — | Yes (IEEE Std 1149.1) |
| Data Width | — | 1 bit (serial DATA output) |