EPC2T32UCAF48 vs EPC2TC32UCF48 Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC2T32UCAF48 tarafından Intel ve EPC2TC32UCF48 tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC2T32UCAF48 | EPC2TC32UCF48 |
|---|---|---|
| Marka | Intel | Intel |
| Kategori | Memory ICs | Memory ICs |
| Yaşam Döngüsü Durumu | Aktif | NRND |
| Device Type | Configuration PROM for SRAM-based FPGAs | — |
| Memory Capacity | 32 Mbit | — |
| Arayüz | Serial / Parallel configuration; JTAG (IEEE 1149.1) ISP | — |
| Besleme Gerilimi | 3.0 V to 3.6 V (3.3 V typical) | — |
| Configuration Modes | Serial, Parallel (8/16-bit) | — |
| JTAG Interface | 4-wire (TMS, TCK, TDI, TDO) | — |
| Cascade Support | Yes (nCASC pin for multi-device chains) | — |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | 0C to +70C (commercial) |
| Paket | QFP-48 (CAF48) | 48-pin TQFP (7x7 mm) |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: confirm RoHS compliance] |
| Process Technology | CMOS non-volatile memory | — |
| Manufacturer | Intel (formerly Altera) | — |
| Series | EPC2 (Enhanced Configuration Device) | — |
| Bellek Türü | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Density | — | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Programming Interface | — | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Configuration Interface | — | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |