EPC8Q100 vs EPC8Q1100 Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC8Q100 tarafından Altera ve EPC8Q1100 tarafından AlteraAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC8Q100 | EPC8Q1100 |
|---|---|---|
| Marka | Altera | Altera |
| Kategori | FPGA & CPLD | FPGA & CPLD |
| Yaşam Döngüsü Durumu | Obsolete | Son Alış Zamanı |
| Memory Density | 8 Mbit (8,388,608 bits) | 8 Mbit (8,388,608 bits) |
| Bellek Türü | NOR Flash, One-Time-Programmable (OTP) via JTAG | — |
| Configuration Interface | Altera EPC serial (DATA, DCLK, nCS, nINIT_CONF, nSTATUS, DONE) | Altera Enhanced Config serial interface (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Supply Voltage VCC | 5.0 V (3.3 V core generated on-chip) | — |
| Internal Core Voltage | 3.3 V (on-chip LDO) | — |
| Maximum EPC Clock | 33 MHz | — |
| Programmability | In-system via IEEE 1149.1 JTAG | — |
| FPGA Compatibility | APEX 20K, APEX II, Cyclone, Cyclone II, Stratix, Stratix GX | — |
| Configuration Mode Support | FPP, PS, AS, JTAG (FPGA-dependent) | — |
| Program/Erase Endurance | [DATA_NEEDED: cycle count] | — |
| Data Retention | [DATA_NEEDED: minimum years] | [DATA_NEEDED: data retention years] |
| İşletim Sıcaklığı Aralığı | 0 C to +70 C (commercial) | — |
| Storage Temperature Range | [DATA_NEEDED: range] | — |
| Paket | 100-pin PQFP (20 x 14 mm) | 100-pin PQFP (plastic quad flat pack) |
| Montaj Türü | Surface Mount | — |
| MSL Seviyesi | [DATA_NEEDED: level] | — |
| Lead-Free / RoHS | [DATA_NEEDED: status] | — |
| Product Type | — | Enhanced Configuration Device (boot PROM) |
| Supported FPGAs | — | Altera SRAM-based LUT FPGAs (Cyclone, Stratix, APEX, ACEX, Mercury, Excalibur) |
| Max DCLK Frequency | — | 33 MHz (Fast-mode) |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Supply Voltage (VCCIO for FPGA interface) | — | 1.8 V / 2.5 V / 3.3 V tolerant |
| Programming Interface | — | IEEE Std 1149.1 JTAG (ISP) + serial byte-blaster mode |
| In-System Programmable | — | Yes |
| İşletim Sıcaklığı | — | -40 C to +85 C (industrial) |
| Operating Current (active read) | — | [DATA_NEEDED: active ICC] |
| Standby Current | — | [DATA_NEEDED: ICC standby] |
| Endurance (program/erase cycles) | — | [DATA_NEEDED: endurance cycles] |
| RoHS Durumu | — | [DATA_NEEDED: RoHS status] |
| Lead-Free | — | [DATA_NEEDED: lead-free] |