LM293DRG3 vs LM2904PWR Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM293DRG3 tarafından Texas Instruments ve LM2904PWR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ AktifÖzellik Karşılaştırması
| Parametre | LM293DRG3 | LM2904PWR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual differential voltage comparator | — |
| Number of Channels | 2 channels | — |
| Supply Voltage, Single | ±15 V | — |
| Total Supply Voltage | 30 V | — |
| Differential Input Voltage Range | ±38 V | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Çıkış Türü | Open-collector, open-drain | — |
| Output Rail-to-Rail | Yes | — |
| Output Logic Compatibility | TTL, MOS, and CMOS | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Supply Current per Channel | [DATA_NEEDED: supply current per channel] | — |
| İşletim Sıcaklığı Aralığı | Industrial grade; exact range [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Paket | 8-pin SOIC, 3.90 mm width | 8-TSSOP, 4.40 mm width |
| Montaj Türü | Surface mount | Surface mount |
| Shipping Format | Tape and reel | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | Not an AEC-Q100-qualified variant | — |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |