LM293DRG3 vs LM2904PWR Vergleich
Detaillierter Direktvergleich von LM293DRG3 von Texas Instruments und LM2904PWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ AktivSpezifikationsvergleich
| Parameter | LM293DRG3 | LM2904PWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | Dual differential voltage comparator | — |
| Number of Channels | 2 channels | — |
| Supply Voltage, Single | ±15 V | — |
| Total Supply Voltage | 30 V | — |
| Differential Input Voltage Range | ±38 V | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Ausgangstyp | Open-collector, open-drain | — |
| Output Rail-to-Rail | Yes | — |
| Output Logic Compatibility | TTL, MOS, and CMOS | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Supply Current per Channel | [DATA_NEEDED: supply current per channel] | — |
| Betriebstemperaturbereich | Industrial grade; exact range [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-pin SOIC, 3.90 mm width | 8-TSSOP, 4.40 mm width |
| Montageart | Surface mount | Surface mount |
| Shipping Format | Tape and reel | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | Not an AEC-Q100-qualified variant | — |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |