LM293DRG3 vs LM2904PWR So sánh
So sánh chi tiết song song của LM293DRG3 bằng Texas Instruments và LM2904PWR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM293DRG3 - Dual Differential Comparator | Texas Instruments
LM293DRG3 ✓ Hoạt độngTexas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM293DRG3 | LM2904PWR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential voltage comparator | — |
| Number of Channels | 2 channels | — |
| Supply Voltage, Single | ±15 V | — |
| Total Supply Voltage | 30 V | — |
| Differential Input Voltage Range | ±38 V | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Kiểu đầu ra | Open-collector, open-drain | — |
| Output Rail-to-Rail | Yes | — |
| Output Logic Compatibility | TTL, MOS, and CMOS | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Supply Current per Channel | [DATA_NEEDED: supply current per channel] | — |
| Khoảng nhiệt độ hoạt động | Industrial grade; exact range [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Hộp | 8-pin SOIC, 3.90 mm width | 8-TSSOP, 4.40 mm width |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Shipping Format | Tape and reel | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | Not an AEC-Q100-qualified variant | — |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |