SN65HVD230DR vs SN65HVD232DR Karşılaştırma

Ayrıntılı yan yana karşılaştırma SN65HVD230DR tarafından Texas Instruments ve SN65HVD232DR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
SN65HVD232DR SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

SN65HVD232DR ✓ Aktif

Özellik Karşılaştırması

Parametre SN65HVD230DR SN65HVD232DR
Marka Texas Instruments Texas Instruments
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type CAN Bus Transceiver Single-channel CAN transceiver
Number of Drivers/Receivers 1/1 —
Protocol CANbus (ISO 11898-2) —
Besleme Gerilimi 3 V to 3.6 V (3.3 V nominal) 3.3 V
Maximum Data Rate 1 Mbps —
Driver/Receiver Configuration Half-Duplex —
Standby Mode Supply Current 370 uA typical —
ESD Protection (Bus Pins, HBM) Exceeds 16 kV —
Maximum Nodes on Bus 120 nodes —
Receiver Common-Mode Range -2 V to 7 V —
İşletim Sıcaklığı -40C to +85C -40°C to +85°C
Paket 8-SOIC (D) 8-pin SOIC
Montaj Türü Surface Mount —
RoHS Durumu Compliant [DATA_NEEDED: RoHS status for this specific orderable part]
RS Pin Function Slew-rate control via external resistor —
CAN Data Rate — Up to 1 Mbps
CAN Standard Compatibility — ISO 11898-2 high-speed CAN physical layer
Bus Nodes — Up to 120 nodes
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Supply Voltage Range — [DATA_NEEDED: recommended operating supply-voltage range]
Logic Input Voltage — [DATA_NEEDED: CAN controller-compatible logic voltage]
Differential Output Voltage — Comparable between the SN65HVD23x family variants; exact value not stated in verified search data
Dominant Common-Mode Output — Lower than 5V supplied transceivers by a few hundred millivolts
Recessive Common-Mode Output Bias — Same as the referenced 5V supplied transceiver family
Receiver Input Impedance — High; supports up to 120 nodes on a bus
Driver Output Transition Time — Controlled for improved signal quality
Unpowered Node Behavior — Does not disturb the CAN bus
Channel Count — 1 CAN channel
REACH Status — [DATA_NEEDED: REACH status for this specific orderable part]
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin