SN65HVD232DR vs SN65HVD230DR Karşılaştırma

Ayrıntılı yan yana karşılaştırma SN65HVD232DR tarafından Texas Instruments ve SN65HVD230DR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
SN65HVD232DR SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

SN65HVD232DR ✓ Aktif

Özellik Karşılaştırması

Parametre SN65HVD232DR SN65HVD230DR
Marka Texas Instruments Texas Instruments
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type Single-channel CAN transceiver CAN Bus Transceiver
Besleme Gerilimi 3.3 V 3 V to 3.6 V (3.3 V nominal)
CAN Data Rate Up to 1 Mbps —
CAN Standard Compatibility ISO 11898-2 high-speed CAN physical layer —
Bus Nodes Up to 120 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Paket 8-pin SOIC 8-SOIC (D)
İşletim Sıcaklığı -40°C to +85°C -40C to +85C
Supply Voltage Range [DATA_NEEDED: recommended operating supply-voltage range] —
Logic Input Voltage [DATA_NEEDED: CAN controller-compatible logic voltage] —
Differential Output Voltage Comparable between the SN65HVD23x family variants; exact value not stated in verified search data —
Dominant Common-Mode Output Lower than 5V supplied transceivers by a few hundred millivolts —
Recessive Common-Mode Output Bias Same as the referenced 5V supplied transceiver family —
Receiver Input Impedance High; supports up to 120 nodes on a bus —
Driver Output Transition Time Controlled for improved signal quality —
Unpowered Node Behavior Does not disturb the CAN bus —
Channel Count 1 CAN channel —
RoHS Durumu [DATA_NEEDED: RoHS status for this specific orderable part] Compliant
REACH Status [DATA_NEEDED: REACH status for this specific orderable part] —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Number of Drivers/Receivers — 1/1
Protocol — CANbus (ISO 11898-2)
Maximum Data Rate — 1 Mbps
Driver/Receiver Configuration — Half-Duplex
Standby Mode Supply Current — 370 uA typical
ESD Protection (Bus Pins, HBM) — Exceeds 16 kV
Maximum Nodes on Bus — 120 nodes
Receiver Common-Mode Range — -2 V to 7 V
Montaj Türü — Surface Mount
RS Pin Function — Slew-rate control via external resistor

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin