Analog Devices

AD745JR-16 - 20MHz Low-Noise FET Op Amp | Analog Devices

MPN: AD745JR-16 ✓ Aktif
±4.8 V to ±18 V Vdss 16-pin SOIC Package
MOQ: 1 |

AD745JR-16 Genel Bakış

The Analog Devices AD745JR-16 is an ultralow-noise, high-speed JFET-input operational amplifier with a 20 MHz gain-bandwidth product, 12.5 V/µs slew rate, and operation from ±4.8 V to ±18 V, housed in a 16-pin SOIC package. It combines the low voltage noise associated with bipolar-input amplifiers with the very low bias currents of a FET-input device.

A JFET-input operational amplifier is an analog signal-conditioning IC whose input stage uses junction field-effect transistors. Within the broader hierarchy of amplifier ICs, it belongs to the precision-amplifier family and provides high input impedance, low distortion, and wide bandwidth for signals that require both noise performance and speed. This makes the AD745 suitable where a conventional CMOS amplifier may lack sufficient input impedance or a slower bipolar device may add excessive noise.

The AD745 is designed for precision signal acquisition, instrumentation, audio, and sensor-interface applications. Its 20 MHz gain-bandwidth product supports useful closed-loop bandwidth well beyond audio frequencies, while the 12.5 V/µs slew rate improves large-signal response. The manufacturer describes the device as an ultralow-noise, high-speed, FET-input amplifier, and the 16-pin SOIC option is available in industrial and military temperature grades depending on the order code.

The AD745J grade is specified for the industrial temperature range of -40°C to +85°C. Its input stage provides the low input current expected from a FET design while preserving the low voltage-noise behavior normally associated with bipolar input amplifiers. The AD745 family is available in several packages, including 8-pin plastic mini-DIP, 8-pin cerdip, 16-pin SOIC, and chip form, allowing selection according to assembly method and thermal requirements.

Typical uses include low-level sensor amplification, precision current measurement, audio and instrumentation signal chains, photodiode interfaces, and high-impedance buffer stages. In these applications, the combination of low noise, low input bias current, and 20 MHz bandwidth allows the amplifier to condition signals without imposing a severe bandwidth or loading penalty on the source.

For stable operation, follow the manufacturer's recommended input and output network, provide adequate supply bypassing close to the device, and verify output swing, input common-mode range, and stability across the intended gain and load conditions. The JR-16 order code identifies the 16-pin SOIC package; exact pin functions, noise density, input bias current, and offset limits should be confirmed in the AD745 datasheet before finalizing a design.

Drop-in alternatifler için AD745JR-16 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller AD745JR-16 (aynı form faktörü ve ayağa oturma) — farklı olan Amplifier Type, Package, Slew Rate, Gain-Bandwidth Product, Mounting Type.

Analog Devices
Amplifier Type: Voltage-feedback operational amplifier
Package: 8-pin CERDIP
Slew Rate: 12.5 V/us
İle Karşılaştır AD745JR-16 →
Analog Devices
Amplifier Type: Dual precision BiFET operational amplifier
Package: 8-pin SOIC
Slew Rate: 75 V/µs
İle Karşılaştır AD745JR-16 →

AD745KRZ-16

✅ Yerleştirme
📦 16-pin SOIC
Same 16-pin SOIC footprint and AD745 20 MHz architecture; documented grade and order-code suffix differ from AD745JR-16.

📋 Katalogda Olmayan Referans Alternatifi

AD745JRZ-16

✅ Yerleştirme
📦 16-pin SOIC
Same 16-pin SOIC footprint and AD745 20 MHz architecture; Z-suffixed order code differs from AD745JR-16.

📋 Katalogda Olmayan Referans Alternatifi

AD745AJR-16

✅ Yerleştirme
📦 16-pin SOIC
Same AD745-family 20 MHz JFET architecture in 16-pin SOIC; exact grade and suffix differ, with family variants spanning different temperature options.

📋 Katalogda Olmayan Referans Alternatifi

AD745BJR-16

✅ Yerleştirme
📦 16-pin SOIC
Same AD745-family 20 MHz JFET architecture in 16-pin SOIC; exact grade and suffix differ, with family variants spanning different temperature options.

📋 Katalogda Olmayan Referans Alternatifi

AD745CJR-16

✅ Yerleştirme
📦 16-pin SOIC
Same AD745-family 20 MHz JFET architecture in 16-pin SOIC; exact grade and suffix differ, with family variants spanning different temperature options.

📋 Katalogda Olmayan Referans Alternatifi

AD745JR-16 Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Single JFET-input operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 20 MHz
Slew Rate 12.5 V/µs
Supply Voltage Range ±4.8 V to ±18 V
Total Supply Voltage 9.6 V to 36 V
İşletim Sıcaklığı Aralığı -40°C to +85°C
Paket 16-pin SOIC
Montaj Türü Surface mount
Military Processing Available for AD745S to MIL-STD-883B, Rev. C

AD745JR-16 Pin Yapısı

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 NC — Not connected
Pin 2 -INPUT — Inverting input
Pin 3 +INPUT — Non-inverting input
Pin 4 -VS — Negative supply voltage
Pin 5 NC — Not connected
Pin 6 OUTPUT — Operational amplifier output
Pin 7 +VS — Positive supply voltage
Pin 8 NC — Not connected
Pin 9 NC — Not connected
Pin 10 NC — Not connected
Pin 11 NC — Not connected
Pin 12 NC — Not connected
Pin 13 NC — Not connected
Pin 14 NC — Not connected
Pin 15 NC — Not connected
Pin 16 NC — Not connected

Tipik Uygulamalar

AD745JR-16 için uygundur 6 uygulamas: Precision Sensor Signal Conditioning, Audio and Instrumentation Amplification, Photodiode and High-Impedance Buffering, Current Measurement Front Ends, Industrial Data Acquisition, Test and Measurement Signal Conditioning.

🧩

Precision Sensor Signal Conditioning

The AD745JR-16 fits low-level sensor interfaces because its JFET input stage provides very low input current, reducing loading on high-impedance sources, while its 20 MHz gain-bandwidth product preserves signal bandwidth. Place it in a non-inverting or differential conditioning stage ahead of an ADC or measurement converter. Compared with a general-purpose CMOS amplifier, the documented ultralow-noise, high-speed architecture better preserves small signals, although the exact noise density, input bias current, and common-mode limits must be checked for the selected grade.

🎧

Audio and Instrumentation Amplification

The AD745JR-16 is appropriate for precision audio and instrumentation paths where low voltage noise and moderate-to-high bandwidth are required together. Its 20 MHz gain-bandwidth product exceeds the useful range of many audio-only amplifiers, while the 12.5 V/µs slew rate improves response to larger transient waveforms. Use it in a low-gain preamplifier or line-level conditioning stage, and verify output drive, output swing, and stability against the intended load.

📷

Photodiode and High-Impedance Buffering

A photodiode or capacitive sensor benefits from the AD745JR-16's low-input-current JFET stage because the source otherwise presents a very high impedance. The amplifier can buffer the sensor before a downstream sampling or transimpedance stage without contributing substantial loading. The 20 MHz bandwidth permits faster settling than many precision-only amplifiers, but photodiode capacitance, cable length, noise gain, and input-bias-current error must be included in the complete stability and sensitivity analysis.

⚡

Current Measurement Front Ends

The AD745JR-16 can amplify the small voltage produced by a shunt or current-sense element when low input bias current is important. Its JFET architecture avoids the higher bias currents commonly encountered with bipolar-input precision amplifiers, helping preserve measurement accuracy at high source impedance. The 20 MHz bandwidth allows the signal path to accommodate higher-frequency current waveforms, although designers should account for shunt impedance, common-mode voltage, amplifier offset, and the required gain-bandwidth product.

🏭

Industrial Data Acquisition

The AD745JR-16 works as an analog front-end amplifier for industrial data-acquisition systems requiring low-noise amplification over a broader bandwidth than a conventional precision amplifier. Its -40°C to +85°C industrial temperature range supports controlled equipment, and the ±4.8 V to ±18 V supply capability accommodates conventional bipolar analog rails. Pair it with suitable input filtering and an ADC, then verify noise, settling time, input-range limits, and system calibration across the operating temperature range.

🖥️

Test and Measurement Signal Conditioning

The AD745JR-16 can condition low-level signals in test and measurement equipment while preserving the wide bandwidth needed for diagnostics and waveform capture. Its 20 MHz gain-bandwidth product and 12.5 V/µs slew rate provide more dynamic range than a slow precision-only op amp. Use it ahead of a higher-bandwidth converter when the source impedance is high enough to make low input bias current important, and check settling, output loading, and noise performance for the required measurement bandwidth.

Önerilen Ürünler Özeti

AD745A AD745-family precision amplifier option Kullanıldığı Yer: Precision Sensor Signal Conditioning, Audio and Instrumentation Amplification, Photodiode and High-Impedance Buffering, Current Measurement Front Ends, Industrial Data Acquisition, Test and Measurement Signal Conditioning AD745B AD745-family precision amplifier option Kullanıldığı Yer: Precision Sensor Signal Conditioning, Audio and Instrumentation Amplification, Photodiode and High-Impedance Buffering, Current Measurement Front Ends, Industrial Data Acquisition, Test and Measurement Signal Conditioning AD745S AD745-family military-temperature option Kullanıldığı Yer: Precision Sensor Signal Conditioning, Photodiode and High-Impedance Buffering, Test and Measurement Signal Conditioning AD745 Base AD745 precision amplifier family Kullanıldığı Yer: Audio and Instrumentation Amplification, Current Measurement Front Ends AD745J AD745 industrial-temperature family grade Kullanıldığı Yer: Industrial Data Acquisition
What is the AD745JR-16?
The AD745JR-16 is a single, ultralow-noise, high-speed JFET-input operational amplifier from Analog Devices in a 16-pin SOIC package. According to the manufacturer product page and AD745 family documentation, it combines bipolar-input-amplifier voltage-noise performance with the very low input currents of a FET input stage. It provides a 20 MHz gain-bandwidth product and operates from ±4.8 V to ±18 V.
What are the key specifications of AD745JR-16 that engineers should know?
The AD745JR-16 is a single JFET-input precision amplifier with a 20 MHz gain-bandwidth product, 12.5 V/µs slew rate, and a ±4.8 V to ±18 V supply range. According to the Analog Devices AD745 family documentation, the industrial AD745J grade covers -40°C to +85°C and is offered in a 16-pin SOIC package. Low input current and ultralow noise make it especially useful with high-impedance sources.
Where can I download the AD745JR-16 datasheet PDF?
The AD745JR-16 datasheet can be obtained through the official Analog Devices AD745 product page or through a dedicated datasheet listing. The manufacturer page identifies the AD745 family's electrical characteristics, available packages, and temperature grades. Use the manufacturer copy for final pin assignments, recommended application circuits, noise measurements, and electrical limits before releasing a production design.
Where can I find the AD745JR-16 pinout?
The AD745JR-16 pinout is documented in the AD745 manufacturer's pin-description table for its 16-pin SOIC option. The device is a single operational amplifier with non-inverting and inverting inputs, a supply pin, a ground pin, an output, and no-connect positions. Use the exact AD745 pin-description table when assigning tracks because package drawings alone do not identify the electrical function of every terminal.
Is the AD745JR-16 suitable for high-impedance sensor interfaces?
Yes, the AD745JR-16 is suitable for high-impedance sensor interfaces because its JFET input stage provides very low input current while maintaining low voltage noise. According to the AD745 family description, this combines a characteristic usually associated with bipolar-input amplifiers with the low loading of FET inputs. The 20 MHz bandwidth also allows it to amplify signals beyond the audio range when the sensor and cable capacitance permit.
What is the difference between AD745JR-16 and AD745JRZ-16?
The principal documented distinction is the grade and order-code suffix: AD745JR-16 is the 16-pin SOIC industrial-grade ordering code, while AD745JRZ-16 identifies the related Z-suffixed ordering option listed as a direct substitute. Both retain the AD745 family's 20 MHz, low-noise JFET amplifier architecture and 16-pin SOIC footprint. Confirm lead finish, temperature grade, and exact marking against the current manufacturer ordering guide before substitution.
AD745JR-16 vs AD745KRZ-16 - which is better for an industrial precision amplifier?
AD745JR-16 and AD745KRZ-16 are closely related 16-pin SOIC AD745 options listed as substitutes, and the documented core performance includes 20 MHz bandwidth and 12.5 V/µs slew rate. Selection should focus on the exact K-versus-J grade, temperature qualification, ordering suffix, and required qualification status rather than assuming that every order code is interchangeable in every industrial program.
When should I choose AD745JR-16 over another 16-pin precision op amp?
Choose the AD745JR-16 when the design needs the combination of a JFET input stage, ultralow voltage noise, very low input current, and a 20 MHz gain-bandwidth product. Its 12.5 V/µs slew rate also makes it stronger than slower precision amplifiers for moderate-bandwidth signals. A bipolar or CMOS amplifier may be preferable when lower input offset voltage, lower input bias current, or lower cost is the dominant requirement.
Can AD745KRZ-16 replace AD745JR-16 on an existing PCB?
AD745KRZ-16 is listed as a direct substitute for AD745JR-16 and uses the same 16-pin SOIC package, making it a potential drop-in replacement. According to the substitute listing, the devices offer similar performance characteristics, but engineers should verify the pinout, supply range, grade, temperature range, and electrical limits in each datasheet. Confirm those details before production use, particularly in regulated or qualification-sensitive equipment.
What can replace AD745JR-16?
AD745KRZ-16 and AD745JRZ-16 are the clearest direct replacement candidates because they are explicitly identified as substitutes and retain the AD745 family's 16-pin SOIC architecture. A replacement should be accepted only after checking pin compatibility, input offset and bias current, noise density, bandwidth, slew rate, supply range, operating temperature, and package lead finish. Use the Request a Quote form on this page when sourcing the selected order code.
What is the best Analog Devices equivalent for AD745JR-16?
AD745KRZ-16 is the most directly identified Analog Devices alternative because it appears in the substitute listing for AD745JR-16, uses the same 16-pin SOIC package, and belongs to the same AD745 amplifier family. AD745JRZ-16 is another related option. Neither should be selected solely from the suffix: verify the exact electrical grade and ordering information in the current manufacturer documentation.
Where to buy AD745JR-16 online?
Use the Request a Quote form on this page to request AD745JR-16 pricing, stock, packaging details, and lead time. The commercial inquiry stays on one XAIPART page and avoids comparing unrelated order codes or obsolete package variants. Include the required quantity, reel or tube preference, and any date-code requirement in the request.
What is the price of AD745JR-16?
AD745JR-16 pricing is generated through the XAIPART quote workflow rather than published as a static customer-facing figure. Use the Request a Quote form on this page and specify quantity, packaging, and shipment destination. The exact order code AD745JR-16 should be stated so that pricing and availability are not confused with AD745JRZ-16 or reel packaging variants.
What is the lead time for AD745JR-16?
The current AD745JR-16 lead time depends on manufacturer inventory, order volume, and the packaging selected. Use the Request a Quote form on this page to request a current lead-time confirmation and minimum-order quantity. Include whether production quantities are needed immediately and state the required packaging format for the most useful schedule.
Is AD745JR-16 in stock and what is its lifecycle status?
Current stock should be confirmed through the Request a Quote form on this page because availability can change with quantity and package configuration. Analog Devices continues to list the AD745 family as an active product family, with industrial and military grade options, but the exact AD745JR-16 stock position is transactional rather than a fixed product attribute. Submit the required quantity and packaging for a current confirmation.
How much power does AD745JR-16 consume?
The AD745JR-16 supply range is ±4.8 V to ±18 V, but its exact quiescent current and therefore typical static power depend on the electrical grade and supply voltage. Use the power dissipation and quiescent-current values in the AD745 datasheet for the selected order code. For a preliminary estimate, multiply quiescent current by the total rail-to-rail voltage and add output-stage dissipation under the intended load.

Mühendislik referans verileri: AD745JR-16 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the AD745JR-16 when the source impedance is high enough that low input current matters and the signal path also needs more than a slow, precision-only amplifier. Its 20 MHz gain-bandwidth product, 12.5 V/µs slew rate, and JFET input stage are useful for sensor interfaces, audio, instrumentation, and measurement front ends. Choose AD745JRZ-16 when it is the specifically qualified equivalent for the product configuration, and choose AD745KRZ-16 only after checking the K-grade and Z-suffix requirements. AD745S is preferable when the design requires the broader -55°C to +125°C military temperature range or MIL-STD-883B processing. For low-cost or low-current applications, a conventional CMOS or bipolar amplifier may be more appropriate if its noise, offset, bandwidth, and bias-current characteristics meet the actual requirements.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün AD745KRZ-16 AD745JRZ-16 AD745AJR-16 AD745BJR-16 AD745CJR-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Amplifier Type Single JFET-input operational amplifier Single JFET-input operational amplifier Single JFET-input operational amplifier AD745-family JFET-input operational amplifier AD745-family JFET-input operational amplifier AD745-family JFET-input operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Gain-Bandwidth Product 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Slew Rate 12.5 V/µs 12.5 V/µs 12.5 V/µs 12.5 V/µs 12.5 V/µs 12.5 V/µs
Supply Voltage Range ±4.8 V to ±18 V ±4.8 V to ±18 V ±4.8 V to ±18 V ±4.8 V to ±18 V ±4.8 V to ±18 V ±4.8 V to ±18 V

Ana Farklılayıcılar

  • Combines a JFET input stage with high speed (karşılaştırma:AD745KRZ-16)
  • Maintains the same 16-pin SOIC footprint (karşılaştırma:AD745JRZ-16)
  • Supports industrial-temperature operation (karşılaştırma:AD745S)

Tasarım Notları

Do not treat every AD745 order code as automatically interchangeable. The JR-16 suffix identifies a specific 16-pin SOIC configuration, while J, K, A, B, C, S, and Z suffix combinations can represent different temperature, qualification, or finish options. Before approving a substitution, compare the exact pinout, supply range, electrical limits, operating temperature, and qualification requirements. The package being the same 16-pin SOIC establishes footprint compatibility, not complete functional equivalence.

For high-impedance sources, minimize PCB leakage and contamination around the input pins because even a low input-bias-current amplifier can be disturbed by board-surface leakage. Keep the input traces short, avoid routing near switching nodes and high-impedance output traces, and use guarding techniques where practical. Include cable and probe capacitance in the stability analysis because the AD745's 20 MHz bandwidth is substantially higher than the bandwidth of many low-noise precision amplifiers.

Use the manufacturer's recommended supply-decoupling arrangement with short, low-inductance connections between the supply pins and local capacitors. The AD745JR-16 supports ±4.8 V to ±18 V operation, so verify that every powered terminal remains within its allowable limits, including during startup and shutdown. Do not apply a positive supply directly to the negative supply pin; provide a common ground reference or use the appropriate dual-rail arrangement for the chosen circuit topology.

Reserve the 16-pin SOIC footprint exactly according to the manufacturer land pattern, including all no-connect pins, and observe the standard pin-1 orientation. Keep the output route away from the input to minimize parasitic feedback, particularly when using inverting configurations with high gain. A ground plane should provide a low-impedance return for supply and signal currents, while analog and high-current switching paths should remain spatially separated.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The AD745 family is not identified as an AEC-Q100 automotive product in the available documentation. The AD745S family option is available processed to MIL-STD-883B, Rev. C. Specific RoHS, REACH, lead-free, and halogen-free declarations for the exact order code require confirmation from the manufacturer.

İlgili Aramalar

AD745JR-16 datasheet AD745JR-16 pinout AD745JR-16 datasheet pdf AD745JR-16 equivalent AD745JR-16 replacement AD745JR-16 cross reference AD745JR-16 vs AD745KRZ-16 AD745JR-16 20MHz op amp AD745JR-16 16 pin SOIC AD745JR-16 price AD745JR-16 stock Analog Devices AD745JR-16 AD745JR-16 sensor amplifier AD745JR-16 JFET input

İlgili Bileşenler ve Terimler

Analog Devices AD745JR-16 AD745KRZ-16 AD745JRZ-16 AD745AJR-16 AD745BJR-16 AD745CJR-16 AD745 JFET input operational amplifier precision amplifier operational amplifier amplifier IC semiconductor 16-pin SOIC SOIC package family surface mount SMD gain-bandwidth product slew rate voltage noise input bias current high-impedance sensor interface signal conditioning MIL-STD-883B
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle