AD842JN - 80MHz High-Speed Operational Amplifier | Analog Devices
MPN: AD842JN ✓ AktifAD842JN Genel Bakış
An operational amplifier is an analog signal-processing IC that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. Within the amplifier hierarchy, the AD842JN belongs to the precision operational-amplifier category, combines high DC precision with wideband AC performance, and operates as a building block in instrumentation, communications, and test systems.
Key characteristics include an 80 MHz gain-bandwidth product, operation from dual supplies of plus or minus 5 V through plus or minus 18 V, and a minimum output-current drive of 100 mA. According to the manufacturer data sheet, the device uses Analog Devices' junction-isolated complementary bipolar process, combining DC precision with high-speed AC operation. Its minimum stable gain of two makes it particularly suitable for non-inverting gain stages operating above unity gain.
The AD842's architecture supports instrumentation, video, communications, and pulse-processing applications. At higher closed-loop gains, the available bandwidth increases while the full-power bandwidth depends on slew rate and output-voltage amplitude. The device's short-circuit protection and thermal characteristics allow it to operate as a practical output stage in demanding analog systems, although external current limiting and careful thermal design remain necessary.
Typical uses include high-speed current-to-voltage conversion, analog signal conditioning, active filtering, video amplification, communications-channel equalization, and laboratory instrumentation. The AD842JN is appropriate when a precision amplifier must combine high bandwidth with unusually strong output-current drive rather than operate only into a high-impedance measurement instrument.
For stable operation, follow the manufacturer's minimum closed-loop gain requirement and preserve the recommended feedback topology. Place input, feedback, and decoupling connections to minimize parasitic capacitance, because excessive loading or incorrect compensation can produce ringing or instability. Account for supply headroom and output swing when driving low-impedance loads.
This product data combines manufacturer specifications, package and pin information, sourcing guidance, and drop-in replacement analysis to support faster component selection and PCB-level implementation.
Drop-in alternatifler için AD842JN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller AD842JN (aynı form faktörü ve ayağa oturma) — farklı olan Package, Slew Rate, Amplifier Type, Gain Flatness, Gain-Bandwidth Product.
AD8001ANZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD8002ANZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD8004ANZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD8013ANZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD842JNZ
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
AD842JN Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Single wideband precision operational amplifier |
| Gain-Bandwidth Product | 80 MHz |
| Minimum Stable Gain | 2 |
| Supply Voltage Range | +/-5 V to +/-18 V |
| Minimum Output Current Drive | 100 mA |
| Paket | 14-pin PDIP |
| Montaj Türü | Through-hole |
| Process Technology | Junction-isolated complementary bipolar (CB) process |
AD842JN Pin Yapısı
| Pin 1 | NC — Not connected |
| Pin 2 | -IN — Inverting input |
| Pin 3 | +IN — Non-inverting input |
| Pin 4 | V- — Negative supply |
| Pin 5 | NC — Not connected |
| Pin 6 | OUT — Output |
| Pin 7 | V+ — Positive supply |
| Pin 8 | NC — Not connected |
| Pin 9 | NC — Not connected |
| Pin 10 | NC — Not connected |
| Pin 11 | NC — Not connected |
| Pin 12 | NC — Not connected |
| Pin 13 | NC — Not connected |
| Pin 14 | NC — Not connected |
Tipik Uygulamalar
AD842JN için uygundur 6 uygulamas: High-Speed Instrumentation Signal Conditioning, Video Amplification, Communications Channel Equalization, Current-to-Voltage Conversion, Active Filtering, Laboratory Pulse and Waveform Amplification.
High-Speed Instrumentation Signal Conditioning
The AD842JN fits gain-two and higher instrumentation stages requiring 80 MHz gain-bandwidth product and 375 V/us slew rate. Its junction-isolated complementary bipolar process supports both DC precision and wideband AC performance, while the 100 mA minimum output-current capability allows the amplifier to drive practical sensor-processing loads more effectively than a high-impedance-only precision op amp. Place the device in a conventional inverting or noninverting feedback network and preserve its gain-of-two stability constraint. Check the input common-mode range, output swing, and package dissipation against the actual sensor excitation and acquisition bandwidth.
Önerilen
Video Amplification
The AD842JN is suitable for video monitoring and distribution stages that benefit from an 80 MHz gain-bandwidth product and fast settling. Its gain-two minimum stability requirement fits noninverting gain-two circuits or inverting stages with an appropriate feedback ratio. The amplifier can support video cables, terminations, and active filtering more effectively than a unity-gain general-purpose device because its output-current drive is specified at 100 mA or greater. The designer should still verify video bandwidth, output swing, load impedance, and settling behavior for the target standard, and should keep feedback traces short to avoid degrading high-frequency stability.
Önerilen
Communications Channel Equalization
The AD842JN can amplify and shape communications channels when the required closed-loop gain is two or greater and the signal bandwidth approaches the device's 80 MHz gain-bandwidth capability. Its 375 V/us slew rate provides substantial headroom for fast edges, while the strong output-current capability helps drive cable, transformer, or termination networks. Gain distribution should be designed so that no stage violates the minimum stable gain. Input and feedback component parasitics become increasingly important at high frequency, so use compact layout, controlled impedance, and the manufacturer's recommended compensation network. Confirm channel amplitude, source impedance, and allowable distortion before finalizing the circuit.
Önerilen
Current-to-Voltage Conversion
The AD842JN suits current-to-voltage conversion when a photodiode, sensor, or current source feeds a transimpedance stage and the resulting signal requires wideband, high-drive amplification. The 80 MHz gain-bandwidth product allows the amplifier to preserve signal edges beyond the bandwidth of many precision-only devices, while 375 V/us slew rate supports large-signal responses. The 100 mA output-current specification is particularly useful when the converter must also drive a following stage. Stability depends on sensor capacitance, feedback resistance, and loop gain, so follow the manufacturer's transimpedance guidance and keep the feedback node physically small.
Önerilen
Active Filtering
The AD842JN can implement active filters whose useful frequency range requires the bandwidth of a precision and high-speed amplifier combined. Its 80 MHz gain-bandwidth product supports filter stages above the operating range of conventional precision op amps, and its 375 V/us slew rate helps preserve low-distortion behavior with large signals. Gain must remain at two or higher unless the selected feedback network includes suitable compensation. Component tolerances, parasitic capacitance, and the amplifier's finite output impedance can alter filter Q and peaking, so simulate the complete network and use the manufacturer's recommended stability techniques rather than relying only on ideal equations.
Önerilen
Laboratory Pulse and Waveform Amplification
The AD842JN is appropriate for laboratory buffer and pulse-amplifier positions requiring fast slew and useful output-current capability rather than only excellent DC accuracy. The 375 V/us slew rate helps reproduce step-like waveforms, and the 80 MHz gain-bandwidth product provides bandwidth for moderate-speed signals. Gain two or greater provides the intended stability region for conventional layouts. When driving oscilloscope inputs, cable terminations, or downstream instrumentation, calculate output-current demand and thermal dissipation, maintain adequate supply headroom, and use short PCB paths to minimize parasitic feedback that could cause ringing.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: AD842JN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | AD8001ANZ | AD8002ANZ | AD8004ANZ | AD8013ANZ | AD842JNZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Ana Farklılayıcılar
- Wideband precision with strong output drive (karşılaştırma:AD842JNZ)
- Minimum stable gain of two simplifies high-gain layouts (karşılaştırma:AD8001ANZ)
- High slew rate supports large-signal bandwidth (karşılaştırma:AD8002ANZ)
- Dual-supply operation supports high output swing (karşılaştırma:AD8004ANZ)
Tasarım Notları
The AD842 is stable at a gain of two or greater, so do not configure it as a conventional unity-gain voltage follower. If the application requires unity gain, choose an amplifier explicitly rated for that configuration. For gain-two operation, calculate the complete feedback network and confirm that parasitic capacitance at the inverting input will not reduce stability margin or introduce peaking.
Use a compact ground plane and place supply-decoupling capacitors immediately adjacent to the positive and negative supply pins. Keep the inverting-input and feedback paths short, and avoid routing high-current outputs beneath sensitive input traces. Because the AD842JN is a high-speed through-hole device, lead inductance and excessive feedback-loop area can create ringing that is not apparent in a low-frequency simulation.
Estimated: output power is approximately VOUT times IOUT when the output remains near mid-supply. With IOUT at 100 mA and VOUT at 10 V, output dissipation is about 1 W. Compare that estimate with the PDIP package's allowable dissipation and the ambient-temperature derating in the manufacturer data sheet. This calculation excludes internal quiescent dissipation and does not guarantee safe operating temperature.
For cables, terminations, or lower-impedance loads, preserve the AD842's drive capability without creating excessive capacitive loading at the output. Check the required output current against the 100 mA minimum specification, then verify output swing and thermal dissipation. Place any isolation resistor close to the amplifier so that the transmission-line and capacitive-load behavior can be characterized with the actual cable or load attached.
Uyumluluk Bilgisi
The AD842 is an industrial and instrumentation operational amplifier rather than an automotive-qualified device. Compliance declarations for the exact AD842JN order code must be obtained from Analog Devices or the authorized channel.