Analog Devices

AD842JN - 80MHz High-Speed Operational Amplifier | Analog Devices

MPN: AD842JN ✓ פעיל
+/-5 V to +/-18 V Vdss 100 mA Id 14-pin PDIP Package
כמות הזמנה מינימלית: 1 |

AD842JN סקירה

Analog Devices AD842JN is a single wideband operational amplifier with an 80 MHz gain-bandwidth product, high output-current capability, and fast settling performance in a 14-pin PDIP package. It is designed for signal-conditioning circuits that require broad bandwidth, accurate amplification, and the ability to drive practical loads without a separate output-buffer stage.

An operational amplifier is an analog signal-processing IC that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. Within the amplifier hierarchy, the AD842JN belongs to the precision operational-amplifier category, combines high DC precision with wideband AC performance, and operates as a building block in instrumentation, communications, and test systems.

Key characteristics include an 80 MHz gain-bandwidth product, operation from dual supplies of plus or minus 5 V through plus or minus 18 V, and a minimum output-current drive of 100 mA. According to the manufacturer data sheet, the device uses Analog Devices' junction-isolated complementary bipolar process, combining DC precision with high-speed AC operation. Its minimum stable gain of two makes it particularly suitable for non-inverting gain stages operating above unity gain.

The AD842's architecture supports instrumentation, video, communications, and pulse-processing applications. At higher closed-loop gains, the available bandwidth increases while the full-power bandwidth depends on slew rate and output-voltage amplitude. The device's short-circuit protection and thermal characteristics allow it to operate as a practical output stage in demanding analog systems, although external current limiting and careful thermal design remain necessary.

Typical uses include high-speed current-to-voltage conversion, analog signal conditioning, active filtering, video amplification, communications-channel equalization, and laboratory instrumentation. The AD842JN is appropriate when a precision amplifier must combine high bandwidth with unusually strong output-current drive rather than operate only into a high-impedance measurement instrument.

For stable operation, follow the manufacturer's minimum closed-loop gain requirement and preserve the recommended feedback topology. Place input, feedback, and decoupling connections to minimize parasitic capacitance, because excessive loading or incorrect compensation can produce ringing or instability. Account for supply headroom and output swing when driving low-impedance loads.

This product data combines manufacturer specifications, package and pin information, sourcing guidance, and drop-in replacement analysis to support faster component selection and PCB-level implementation.

חלופות תחליף ישיר עבור AD842JN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AD842JN (אותו גורם צורה וטביעת רגל) — שונים ב Package, Slew Rate, Amplifier Type, Gain Flatness, Gain-Bandwidth Product.

Analog Devices
Package: 8-pin PDIP, 0.300 inch wide
Slew Rate: 1200 V/us
Amplifier Type: Current Feedback Amplifier
השווה עם AD842JN →
Analog Devices
Package: 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch
Slew Rate: 1200 V/µs
Amplifier Type: Current Feedback Amplifier
השווה עם AD842JN →
Analog Devices
Slew Rate: 3000 V/us
השווה עם AD842JN →
Analog Devices
Package: 14-pin plastic DIP
Slew Rate: 1000 V/us
השווה עם AD842JN →
Analog Devices
Package: TO-8-12
Slew Rate: 375 V/µs
Amplifier Type: Single-channel operational amplifier
השווה עם AD842JN →

AD8001ANZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 14-pin PDIP
Current Feedback Amplifier · 1 channel · 800 MHz · 1200 V/us · 0.1 dB to 100 MHz · 50 mW · Up to +/-6 V · 6 V to 12 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD8002ANZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 14-pin PDIP
Current Feedback Amplifier · 2 circuits · 600 MHz (-3 dB) · 500 MHz (-3 dB) · 1200 V/µs · 16 ns · 50 mW · 5.0 mA per amplifier

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD8004ANZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 14-pin PDIP
4 circuits · Current feedback · 3000 V/us · 35 mW · Single or dual supply · 14-pin PDIP · Through-hole

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD8013ANZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 14-pin PDIP
Triple current-feedback video amplifier · 3 channels · 150 MHz · 140 MHz · 1000 V/us · 30 mA · 150 ohm back termination · +5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD842JNZ

✅ Drop-In
📦 14-pin PDIP
Same electrical family and 14-pin PDIP footprint, with order-code and packing differences; key electrical ratings are unchanged

📋 חלופה להתייחסות (לא בקטלוג)

AD842JN דירוגים מרביים ומאפיינים חשמליים

Product Type Single wideband precision operational amplifier
Gain-Bandwidth Product 80 MHz
Minimum Stable Gain 2
Supply Voltage Range +/-5 V to +/-18 V
Minimum Output Current Drive 100 mA
מארז 14-pin PDIP
סוג הרכבה Through-hole
Process Technology Junction-isolated complementary bipolar (CB) process

תצורת פינים של AD842JN

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
פין 1 NC — Not connected
פין 2 -IN — Inverting input
פין 3 +IN — Non-inverting input
פין 4 V- — Negative supply
פין 5 NC — Not connected
פין 6 OUT — Output
פין 7 V+ — Positive supply
פין 8 NC — Not connected
פין 9 NC — Not connected
פין 10 NC — Not connected
פין 11 NC — Not connected
פין 12 NC — Not connected
פין 13 NC — Not connected
פין 14 NC — Not connected

יישומים טיפוסיים

AD842JN מתאים עבור 6 יישוםs: High-Speed Instrumentation Signal Conditioning, Video Amplification, Communications Channel Equalization, Current-to-Voltage Conversion, Active Filtering, Laboratory Pulse and Waveform Amplification.

📡

High-Speed Instrumentation Signal Conditioning

The AD842JN fits gain-two and higher instrumentation stages requiring 80 MHz gain-bandwidth product and 375 V/us slew rate. Its junction-isolated complementary bipolar process supports both DC precision and wideband AC performance, while the 100 mA minimum output-current capability allows the amplifier to drive practical sensor-processing loads more effectively than a high-impedance-only precision op amp. Place the device in a conventional inverting or noninverting feedback network and preserve its gain-of-two stability constraint. Check the input common-mode range, output swing, and package dissipation against the actual sensor excitation and acquisition bandwidth.

📺

Video Amplification

The AD842JN is suitable for video monitoring and distribution stages that benefit from an 80 MHz gain-bandwidth product and fast settling. Its gain-two minimum stability requirement fits noninverting gain-two circuits or inverting stages with an appropriate feedback ratio. The amplifier can support video cables, terminations, and active filtering more effectively than a unity-gain general-purpose device because its output-current drive is specified at 100 mA or greater. The designer should still verify video bandwidth, output swing, load impedance, and settling behavior for the target standard, and should keep feedback traces short to avoid degrading high-frequency stability.

🌐

Communications Channel Equalization

The AD842JN can amplify and shape communications channels when the required closed-loop gain is two or greater and the signal bandwidth approaches the device's 80 MHz gain-bandwidth capability. Its 375 V/us slew rate provides substantial headroom for fast edges, while the strong output-current capability helps drive cable, transformer, or termination networks. Gain distribution should be designed so that no stage violates the minimum stable gain. Input and feedback component parasitics become increasingly important at high frequency, so use compact layout, controlled impedance, and the manufacturer's recommended compensation network. Confirm channel amplitude, source impedance, and allowable distortion before finalizing the circuit.

🔬

Current-to-Voltage Conversion

The AD842JN suits current-to-voltage conversion when a photodiode, sensor, or current source feeds a transimpedance stage and the resulting signal requires wideband, high-drive amplification. The 80 MHz gain-bandwidth product allows the amplifier to preserve signal edges beyond the bandwidth of many precision-only devices, while 375 V/us slew rate supports large-signal responses. The 100 mA output-current specification is particularly useful when the converter must also drive a following stage. Stability depends on sensor capacitance, feedback resistance, and loop gain, so follow the manufacturer's transimpedance guidance and keep the feedback node physically small.

⚡

Active Filtering

The AD842JN can implement active filters whose useful frequency range requires the bandwidth of a precision and high-speed amplifier combined. Its 80 MHz gain-bandwidth product supports filter stages above the operating range of conventional precision op amps, and its 375 V/us slew rate helps preserve low-distortion behavior with large signals. Gain must remain at two or higher unless the selected feedback network includes suitable compensation. Component tolerances, parasitic capacitance, and the amplifier's finite output impedance can alter filter Q and peaking, so simulate the complete network and use the manufacturer's recommended stability techniques rather than relying only on ideal equations.

🖥️

Laboratory Pulse and Waveform Amplification

The AD842JN is appropriate for laboratory buffer and pulse-amplifier positions requiring fast slew and useful output-current capability rather than only excellent DC accuracy. The 375 V/us slew rate helps reproduce step-like waveforms, and the 80 MHz gain-bandwidth product provides bandwidth for moderate-speed signals. Gain two or greater provides the intended stability region for conventional layouts. When driving oscilloscope inputs, cable terminations, or downstream instrumentation, calculate output-current demand and thermal dissipation, maintain adequate supply headroom, and use short PCB paths to minimize parasitic feedback that could cause ringing.

What is the AD842JN?
The AD842JN is a single wideband precision operational amplifier with an 80 MHz gain-bandwidth product, 100 mA minimum output-current drive, and a minimum stable gain of two. Analog Devices describes it as a wideband op amp fabricated using its junction-isolated complementary bipolar process. It is intended for instrumentation, communications, video, and other high-speed analog signal-conditioning circuits where accurate gain and practical load drive are required.
What are the key specifications of AD842JN that engineers should know?
The AD842JN provides 80 MHz gain-bandwidth product, 375 V/us slew rate, operation from +/-5 V to +/-18 V, and at least 100 mA output-current drive in a 14-pin PDIP package. According to the Analog Devices AD842 data sheet, its minimum stable gain is two, which is the central stability constraint when configuring the amplifier. Input offset voltage, noise, common-mode rejection, and operating-temperature limits should be checked in the manufacturer data sheet for the selected grade.
What is the gain bandwidth product of AD842JN?
The AD842JN has an 80 MHz gain-bandwidth product. This figure describes the closed-loop bandwidth typically obtained with a gain of one, although the device is stable at gain two or greater. According to the Analog Devices product page, the AD842 is part of a family combining DC precision with wideband AC performance. Because its minimum stable gain is two, designers should select feedback values and signal levels that preserve the required operating condition.
What supply voltage does AD842JN require?
The AD842JN operates from dual supplies of +/-5 V through +/-18 V. The Analog Devices product listing identifies a +/-5 V to +/-18 V supply range for the AD842 family. Because output swing and input common-mode limits depend on the actual supply voltage, confirm that the signal remains inside the input and output ranges shown in the manufacturer data sheet. Decoupling capacitors should be placed close to the supply pins.
Where can I download the AD842JN datasheet PDF?
The official AD842 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD842.pdf. It is the primary document for electrical characteristics, the AD842JN package drawing, pin descriptions, power dissipation, stability considerations, and recommended application circuits. The manufacturer's product page at https://www.analog.com/en/products/ad842.html provides a complementary overview of the amplifier family and its key capabilities.
Where can I find the AD842JN pinout?
The AD842JN pinout is defined in the Analog Devices AD842 data sheet and uses a 14-pin PDIP package. Pin 1 is identified by the package marking, and the pin-description table should be used when assigning PCB tracks. The package is through-hole rather than surface mount. Confirm the pin numbering and no-connect assignments against the current manufacturer document before finalizing a layout or making a cross-reference substitution.
Can AD842JN drive a low-impedance load?
The AD842JN can drive practical low-impedance loads more effectively than many general-purpose precision amplifiers because its specified output-current capability is at least 100 mA. According to the Analog Devices AD842 family description, the AD842 family includes an amplifier with 100 mA minimum output-current drive. The output swing, load, frequency, and package dissipation must still be checked together because high current into a low resistance can exceed the allowed thermal dissipation.
Is AD842JN suitable for gain-one operation?
No. The AD842 is intended to be stable at a gain of two or greater, so unity-gain operation is not the normal use case for AD842JN. According to the Analog Devices AD842 family information, the AD842 is stable at gain two or higher. If unity gain, high output impedance, or single-supply operation is essential, select an amplifier whose stability and input/output-range specifications explicitly support those requirements rather than forcing the AD842JN into that configuration.
What is the difference between AD842JN and AD842JR?
The principal documented difference is thermal behavior: Analog Devices states that AD842JR specifications differ from AD842JN and AD842JQ because of the SOIC package's thermal characteristics. The AD842JN is the 14-pin PDIP version, while AD842JR is the SOIC option. Because package thermal resistance and saturation behavior affect large-load or high-frequency operation, engineers should compare the package-specific limits rather than treating the two order codes as electrically and thermally identical.
AD842JN vs AD841JNZ - which is better for a gain-two amplifier?
Choose the AD842JN when the design needs its 80 MHz gain-bandwidth product, 375 V/us slew rate, and at least 100 mA output-current capability; choose AD841JNZ only after confirming the exact required gain, bandwidth, load, and stability. The AD841 family is described as a related high-speed, high-precision family, while the AD842 is specifically stable at gain two or greater. Both are relevant to gain-two designs, so the AD842JN is preferable when its stronger drive and specified minimum stable gain are needed.
When should I choose AD842JN over another high-speed operational amplifier?
Choose AD842JN when the circuit needs an 80 MHz gain-bandwidth product, at least 100 mA output-current drive, and operation from +/-5 V to +/-18 V on a 14-pin PDIP footprint. Its minimum stable gain of two makes it appropriate for gain-two and higher noninverting or inverting stages. Select another amplifier when unity-gain stability, rail-to-rail operation, lower noise, or a surface-mount footprint is the overriding requirement.
What can replace AD842JN?
A valid replacement must match the 14-pin PDIP footprint, preserve the AD842JN minimum stable gain of two, and meet the bandwidth, slew-rate, output-current, and supply-voltage requirements. Same-brand Analog Devices amplifiers can be candidates when their package and gain constraints are confirmed, but an equivalent function label alone is not sufficient. For every candidate, check the manufacturer pin-description table and the AC and DC specifications before treating it as a drop-in replacement.
Is AD842JN the same as AD842JNZ?
AD842JN and AD842JNZ refer to closely related Analog Devices order codes for the 14-pin PDIP package, but packaging-code distinctions should still be checked against the current ordering guide. The AD842 data sheet notes that AD842JR differs from AD842JN and AD842JQ in thermal characteristics, illustrating why the exact suffix matters. For procurement and PCB assembly, use the complete manufacturer part number and confirm reel, tube, or other packing requirements separately.
What is the best Analog Devices equivalent for AD842JN?
The closest same-brand choices should be selected from Analog Devices' high-speed precision-amplifier family by matching the 14-pin PDIP pinout and minimum stable gain of two. AD8001ANZ, AD8002ANZ, AD8004ANZ, and AD8013ANZ are relevant same-brand candidates for engineering review, but each requires verification of pin assignments, bandwidth, stability, output drive, and operating supplies. Do not approve a substitution solely because the package appears similar.
Where can I request a quote for AD842JN?
Use the Request a Quote form on this page to request AD842JN pricing, stock confirmation, and lead time. The form provides the appropriate commercial channel for a standard catalog part without requiring a buyer to rely on stale static pricing. Before requesting final quantities, confirm the exact 14-pin PDIP package, acceptable packing method, quantity breaks, and whether an obsolete or lifecycle transition affects allocation.
How much does AD842JN cost and what is its lead time?
Current commercial terms for AD842JN should be obtained through the Request a Quote form on this page. Enter the required quantity, package or packing preference, and target delivery location so the quote can reflect current availability and lead time. Do not use a historical catalog amount as a commitment, because legacy operational amplifiers can experience significant allocation and lifecycle changes.
Is AD842JN in stock?
Current AD842JN stock status should be confirmed through the Request a Quote form on this page. Because the part is a legacy-style 14-pin PDIP precision amplifier, availability can vary by region, package option, and order quantity. Provide the required quantity and annual usage in the request. Until XAIPART confirms allocation, treat the stock state as quote-dependent rather than guaranteed.

נתוני עזר הנדסיים עבור AD842JN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the AD842JN for gain-two-or-higher analog stages that combine an 80 MHz gain-bandwidth product, 375 V/us slew rate, and at least 100 mA output-current drive. It is especially useful in instrumentation, video, communications, transimpedance, and laboratory waveform circuits where a general-purpose precision amplifier may lack bandwidth or load capability. Select AD842JNZ when its particular order code and packing arrangement better matches procurement or assembly. Review AD8001ANZ, AD8002ANZ, AD8004ANZ, and AD8013ANZ as same-brand alternatives only after checking minimum stable gain, bandwidth, slew rate, output drive, supply limits, and exact pin assignments. Choose a different amplifier entirely when unity-gain stability, rail-to-rail input or output, lower noise, or a surface-mount package is mandatory.

השוואה עם חלופות

פרמטר מוצר זה AD8001ANZ AD8002ANZ AD8004ANZ AD8013ANZ AD842JNZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

מבדילים עיקריים

  • Wideband precision with strong output drive (לעומתAD842JNZ)
  • Minimum stable gain of two simplifies high-gain layouts (לעומתAD8001ANZ)
  • High slew rate supports large-signal bandwidth (לעומתAD8002ANZ)
  • Dual-supply operation supports high output swing (לעומתAD8004ANZ)

הערות תכנון

The AD842 is stable at a gain of two or greater, so do not configure it as a conventional unity-gain voltage follower. If the application requires unity gain, choose an amplifier explicitly rated for that configuration. For gain-two operation, calculate the complete feedback network and confirm that parasitic capacitance at the inverting input will not reduce stability margin or introduce peaking.

Use a compact ground plane and place supply-decoupling capacitors immediately adjacent to the positive and negative supply pins. Keep the inverting-input and feedback paths short, and avoid routing high-current outputs beneath sensitive input traces. Because the AD842JN is a high-speed through-hole device, lead inductance and excessive feedback-loop area can create ringing that is not apparent in a low-frequency simulation.

Estimated: output power is approximately VOUT times IOUT when the output remains near mid-supply. With IOUT at 100 mA and VOUT at 10 V, output dissipation is about 1 W. Compare that estimate with the PDIP package's allowable dissipation and the ambient-temperature derating in the manufacturer data sheet. This calculation excludes internal quiescent dissipation and does not guarantee safe operating temperature.

For cables, terminations, or lower-impedance loads, preserve the AD842's drive capability without creating excessive capacitive loading at the output. Check the required output current against the 100 mA minimum specification, then verify output swing and thermal dissipation. Place any isolation resistor close to the amplifier so that the transmission-line and capacitive-load behavior can be characterized with the actual cable or load attached.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The AD842 is an industrial and instrumentation operational amplifier rather than an automotive-qualified device. Compliance declarations for the exact AD842JN order code must be obtained from Analog Devices or the authorized channel.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD842JN datasheet AD842JN pinout AD842JN datasheet pdf Analog Devices AD842JN AD842JN 80MHz amplifier AD842JN 14-PDIP AD842JN replacement AD842JN equivalent AD842JN vs AD842JNZ AD842JN price AD842JN stock AD842JN application circuit AD842JN high output current AD842JN minimum stable gain

רכיבים ומונחים קשורים

Analog Devices AD842JN AD842JNZ AD8001ANZ AD8002ANZ AD8004ANZ AD8013ANZ operational amplifier precision operational amplifier wideband amplifier single amplifier analog signal conditioning gain-bandwidth product slew rate minimum stable gain output-current drive junction-isolated complementary bipolar process 14-pin PDIP PDIP package family through-hole package instrumentation amplifier video amplification transimpedance conversion active filter laboratory waveform amplification
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר