AD842JN vs AD8002ANZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma AD842JN tarafından Analog Devices ve AD8002ANZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | AD842JN | AD8002ANZ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Single wideband precision operational amplifier | — |
| Gain-Bandwidth Product | 80 MHz | — |
| Minimum Stable Gain | 2 | — |
| Supply Voltage Range | +/-5 V to +/-18 V | [DATA_NEEDED: supply voltage range] |
| Minimum Output Current Drive | 100 mA | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1200 V/µs |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Paket | 14-pin PDIP | 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch |
| Montaj Türü | Through-hole | Through-hole |
| Process Technology | Junction-isolated complementary bipolar (CB) process | — |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Current Feedback Amplifier |
| Number of Circuits | — | 2 circuits |
| Small-Signal Bandwidth at Gain +1 | — | 600 MHz (-3 dB) |
| Small-Signal Bandwidth at Gain +2 | — | 500 MHz (-3 dB) |
| Settling Time to 0.1% | — | 16 ns |
| Maximum Power Dissipation | — | 50 mW |
| Maximum Supply Current | — | 5.0 mA per amplifier |
| Nominal Supply Voltage | — | ±5 V |
| Gain Flatness | — | 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm |
| Differential Gain Error | — | 0.01% |
| Differential Phase Error | — | 0.02 degrees |
| Packaging | — | Tube |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Output Current | — | [DATA_NEEDED: output current] |