ADS7817P - 12-Bit 200 kSPS Differential ADC | Texas Instruments
MPN: ADS7817P ✓ AktifADS7817P Genel Bakış
An ADC is a data-acquisition and data-conversion IC that converts an analog voltage into a digital code for processing, measurement, storage, or transmission. Within the broader semiconductor hierarchy, the ADS7817P is a sampling ADC, then a data-converter IC, and ultimately an interface or data-acquisition IC. Its differential architecture is especially useful when the measured signal is centered around a common reference voltage or when rejecting common-mode noise is important.
The principal features of the ADS7817P include 12-bit resolution, a 200 kSPS conversion rate, and differential analog input. The flexible 100 mV to 2.5 V reference range allows the same converter to serve both small-signal sensor measurements and higher-range industrial instrumentation. Automatic power-down helps reduce energy consumption when the converter is not continuously sampling, which is valuable in portable acquisition systems where duty cycling is common.
Each conversion produces a 12-bit result. The usable code resolution depends on the selected reference voltage and the analog input range. At a 100 mV reference, the converter can provide an input-referred resolution of 49 µV; at a 2.5 V reference, the corresponding resolution is 1.22 mV. These values make reference selection a central system-design decision because increasing the reference range can improve resolution while requiring more analog headroom and careful frontend scaling.
Typical applications include direct transducer interfacing, battery-operated measurement instruments, remote data-acquisition nodes, and multichannel analog monitoring systems. In each case, the ADC can sample a differential sensor output and produce digital data for a microcontroller, embedded processor, or communications interface. Differential input also helps the design reject noise that is common to both signal wires when the external analog circuitry is arranged appropriately.
Layout should prioritize a short, symmetrical route between the input source, reference circuit, and converter pins. Decoupling capacitors should be placed close to their associated supply and reference pins, while analog and digital return currents should be managed to prevent converter activity from coupling into the input signal. The 8-pin mini-DIP package supports straightforward through-hole prototyping and replacement without requiring a fine-pitch surface-mount assembly.
This product page combines the manufacturer specifications with package information, application guidance, verified alternatives, and engineering-oriented design notes. It is intended to help engineers evaluate resolution, conversion speed, reference range, input architecture, and board-level implementation before integrating the ADS7817P into a data-acquisition design.
Drop-in alternatifler için ADS7817P — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ADS7817IP
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
AD7817AR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
AD7817BR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ADS7817P Maksimum Değerlendirmeler & Elektriksel Özellikler
| Converter Type | 12-bit sampling analog-to-digital converter |
| Ölçekleme Oranı | 200 kSPS |
| Çözünürlük | 12 bit |
| Analog Input Architecture | Fully differential |
| Input Impedance | High impedance |
| Reference Voltage Range | 100 mV to 2.5 V |
| Input-Referred Resolution at 100 mV Reference | 49 µV |
| Input-Referred Resolution at 2.5 V Reference | 1.22 mV |
| Power-Down Function | Automatic power-down |
| Power Consumption | Low power |
| Paket | 8-pin plastic mini-DIP |
| Montaj Türü | Through-hole |
ADS7817P 8-pin plastic mini-dip Pin Yapısı Kılavuzu
ADS7817P (8-pin plastic mini-dip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ADS7817P.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADS7817P için uygundur 6 uygulamas: Battery-Powered Sensor Measurement, Remote Data Acquisition, Industrial Transducer Interface, Multichannel Analog Monitoring, Precision Analog Measurement, Laboratory and Portable Instrumentation.
Battery-Powered Sensor Measurement
The ADS7817P fits battery-powered sensor nodes because it combines low-power operation with automatic power-down and a high-impedance differential input. Its 12-bit resolution and 200 kSPS sampling rate support rapid acquisition from differential sensor outputs while the converter remains inactive during longer idle intervals. A 100 mV reference can provide 49 µV input-referred resolution for small sensor signals, although the reference and signal-conditioning circuitry must remain low-power to preserve battery life. In a complete instrument, the converter can digitize the sensor output before the data is stored or transmitted by an embedded controller.
Önerilen
Remote Data Acquisition
The ADS7817P is suitable for remote data-acquisition modules that must capture differential analog measurements close to the sensor and transmit digital results over a communications link. Its 200 kSPS conversion rate provides useful throughput for monitoring rapidly changing signals, while the 8-pin mini-DIP package keeps through-hole construction straightforward. The fully differential input helps reject common-mode noise when the sensor, amplifier, and converter share a suitable reference. Designers should provide local reference and bypass capacitors and isolate the analog input routing from digital interface activity to preserve measurement quality.
Önerilen
Industrial Transducer Interface
The ADS7817P can serve as the sampling element in an industrial transducer interface because its high-impedance differential input supports direct connection to suitable signal-conditioning circuits. The 12-bit converter operates at up to 200 kSPS, allowing it to capture process or physical measurements with better temporal resolution than a slow meter-class ADC. Selecting a reference between 100 mV and 2.5 V determines the input-referred resolution from 49 µV to 1.22 mV. For industrial use, the frontend should include appropriate input protection, filtering, and settling time for the selected sensor and multiplexer configuration.
Önerilen
Multichannel Analog Monitoring
The ADS7817P is appropriate for multichannel monitoring systems in which several analog inputs are scanned through a multiplexer and converted sequentially. A 200 kSPS conversion rate leaves time for input selection and source settling, provided the external network is designed around the converter's acquisition requirements. Differential channels improve common-mode rejection when paired sensor outputs are balanced around the same reference. Engineers should minimize switch resistance, allow adequate settling at the ADC input, and maintain separate analog and digital return paths so that multiplexing transients do not dominate the selected input-referred resolution.
Önerilen
Precision Analog Measurement
The ADS7817P supports precision analog measurement where 12-bit resolution is sufficient but higher sampling speed is needed. With a 100 mV reference, its input-referred resolution is 49 µV; with a 2.5 V reference, it is 1.22 mV. This flexibility allows the reference range to be matched to the signal rather than fixing one input scale. The differential architecture is beneficial for bridge, current, and voltage measurements centered around the reference voltage. Frontend amplifier gain, input resistance, filtering, and reference stability should be evaluated together because they directly affect whether the converter's nominal resolution is retained in the completed system.
Önerilen
Laboratory and Portable Instrumentation
The ADS7817P is well suited to compact laboratory and portable instruments that need a low-power, differential ADC in an easy-to-handle 8-pin package. Its 200 kSPS sampling rate supports waveform capture and rapid measurement updates, while automatic power-down can reduce consumption between operating cycles. A 100 mV reference offers finer input-referred resolution for low-level transducers, whereas a 2.5 V reference supports a wider measurement range. The board should place input-conditioning components near the converter, use compact stable references, and account for connector leakage when working with very high source impedances.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADS7817P — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADS7817IP | AD7817AR | AD7817BR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Analog Devices | Analog Devices |
| Package | 8-pin plastic mini-DIP | 8-pin plastic mini-DIP | 8-pin plastic mini-DIP | 8-pin plastic mini-DIP |
| Converter Type | Sampling ADC | Sampling ADC | Sampling ADC | Sampling ADC |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS |
| Input Architecture | Fully differential | Differential | Differential | Differential |
Ana Farklılayıcılar
- Flexible reference range supports both low-level and wider-range measurements (karşılaştırma:AD7817AR)
- Automatic power-down supports duty-cycled acquisition (karşılaştırma:AD7817AR)
- Through-hole 8-pin construction simplifies prototype assembly (karşılaştırma:ADS7817IP)
Tasarım Notları
Route the differential input as a short, symmetrical pair and place input-series resistors or filtering components close to the converter when they are part of the signal-conditioning network. Keep the analog input nodes away from digital output and serial-interface traces. Differential routing helps preserve common-mode rejection, but it only works effectively when both channels have comparable impedance, the source is correctly referenced, and the common-mode voltage remains within the converter's permitted input range.
Place the reference bypass capacitor and supply-decoupling capacitor directly beside their associated pins, with short ground returns. The reference voltage may be selected from 100 mV to 2.5 V, so reference noise and source impedance can materially affect the 49 µV to 1.22 mV input-referred resolution. Use a low-noise reference source and avoid long parallel copper paths that can couple converter or digital switching activity into the reference node.
Do not assume that a 200 kSPS conversion rate is the usable multichannel throughput without accounting for multiplexer settling and acquisition time. The external driver must present a settled voltage at the converter input during the sampling interval. Similarly, automatic power-down should be coordinated with control logic and measurement timing so that the converter has sufficient startup and acquisition time before the next valid conversion is read.
Treat the analog input and reference as precision signal paths rather than general-purpose routing. Guard against leakage from contaminated PCBs, connector cleaning issues, and high-impedance sensor nodes when operating near the 100 mV reference range. If a low reference is selected, verify input bias current, switch leakage, and resistor tolerance because these effects can become significant relative to the 49 µV input-referred resolution.
Uyumluluk Bilgisi
The manufacturer product page and distributor excerpts do not state the requested compliance or material-status classifications. Use the current Texas Instruments product documentation and declarations for qualification and environmental compliance decisions.