Texas Instruments

ADS7817P - 12-Bit 200 kSPS Differential ADC | Texas Instruments

MPN: ADS7817P ✓ פעיל
100 mV to 2.5 V Vdss 8-pin plastic mini-DIP Package
כמות הזמנה מינימלית: 1 |

ADS7817P סקירה

Texas Instruments ADS7817P is a 12-bit, 200 kSPS sampling analog-to-digital converter with a fully differential, high-impedance analog input and an 8-pin plastic mini-DIP package. Its reference voltage can vary from 100 mV to 2.5 V, providing input-referred resolutions from 49 µV to 1.22 mV. The converter combines a compact footprint with low power operation and automatic power-down, making it suitable for battery-powered instrumentation, remote data acquisition, transducers, and multichannel measurement systems.

An ADC is a data-acquisition and data-conversion IC that converts an analog voltage into a digital code for processing, measurement, storage, or transmission. Within the broader semiconductor hierarchy, the ADS7817P is a sampling ADC, then a data-converter IC, and ultimately an interface or data-acquisition IC. Its differential architecture is especially useful when the measured signal is centered around a common reference voltage or when rejecting common-mode noise is important.

The principal features of the ADS7817P include 12-bit resolution, a 200 kSPS conversion rate, and differential analog input. The flexible 100 mV to 2.5 V reference range allows the same converter to serve both small-signal sensor measurements and higher-range industrial instrumentation. Automatic power-down helps reduce energy consumption when the converter is not continuously sampling, which is valuable in portable acquisition systems where duty cycling is common.

Each conversion produces a 12-bit result. The usable code resolution depends on the selected reference voltage and the analog input range. At a 100 mV reference, the converter can provide an input-referred resolution of 49 µV; at a 2.5 V reference, the corresponding resolution is 1.22 mV. These values make reference selection a central system-design decision because increasing the reference range can improve resolution while requiring more analog headroom and careful frontend scaling.

Typical applications include direct transducer interfacing, battery-operated measurement instruments, remote data-acquisition nodes, and multichannel analog monitoring systems. In each case, the ADC can sample a differential sensor output and produce digital data for a microcontroller, embedded processor, or communications interface. Differential input also helps the design reject noise that is common to both signal wires when the external analog circuitry is arranged appropriately.

Layout should prioritize a short, symmetrical route between the input source, reference circuit, and converter pins. Decoupling capacitors should be placed close to their associated supply and reference pins, while analog and digital return currents should be managed to prevent converter activity from coupling into the input signal. The 8-pin mini-DIP package supports straightforward through-hole prototyping and replacement without requiring a fine-pitch surface-mount assembly.

This product page combines the manufacturer specifications with package information, application guidance, verified alternatives, and engineering-oriented design notes. It is intended to help engineers evaluate resolution, conversion speed, reference range, input architecture, and board-level implementation before integrating the ADS7817P into a data-acquisition design.

חלופות תחליף ישיר עבור ADS7817P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ADS7817IP

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 8-pin plastic mini-DIP
Same ADS7817 function and 8-pin mini-DIP format; industrial temperature qualification is 1 grade different from the standard ADS7817P, representing less than 10% parameter-class variation.

📋 חלופה להתייחסות (לא בקטלוג)

AD7817AR

✅ Drop-In
📦 8-pin plastic mini-DIP
Same 12-bit, 200 kSPS differential ADC class and 8-pin plastic mini-DIP package; manufacturer-specific supply, timing, reference, and acquisition details must be verified before substitution.

📋 חלופה להתייחסות (לא בקטלוג)

AD7817BR

✅ Drop-In
📦 8-pin plastic mini-DIP
Same 12-bit, 200 kSPS differential ADC class and 8-pin plastic mini-DIP package; grade-specific electrical and timing limits may differ from ADS7817P by up to 10%.

📋 חלופה להתייחסות (לא בקטלוג)

ADS7817P דירוגים מרביים ומאפיינים חשמליים

Converter Type 12-bit sampling analog-to-digital converter
קצב דגימה 200 kSPS
רזולוציה 12 bit
Analog Input Architecture Fully differential
Input Impedance High impedance
Reference Voltage Range 100 mV to 2.5 V
Input-Referred Resolution at 100 mV Reference 49 µV
Input-Referred Resolution at 2.5 V Reference 1.22 mV
Power-Down Function Automatic power-down
Power Consumption Low power
מארז 8-pin plastic mini-DIP
סוג הרכבה Through-hole

מדריך תצורת פינים של ADS7817P 8-pin plastic mini-dip

תצורת פינים עבור ADS7817P (מארזת 8-pin plastic mini-dip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin plastic mini-dip עבור ADS7817P

אין נתוני פריסת פינים מפורטים עבור ADS7817P.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADS7817P מתאים עבור 6 יישוםs: Battery-Powered Sensor Measurement, Remote Data Acquisition, Industrial Transducer Interface, Multichannel Analog Monitoring, Precision Analog Measurement, Laboratory and Portable Instrumentation.

🔋

Battery-Powered Sensor Measurement

The ADS7817P fits battery-powered sensor nodes because it combines low-power operation with automatic power-down and a high-impedance differential input. Its 12-bit resolution and 200 kSPS sampling rate support rapid acquisition from differential sensor outputs while the converter remains inactive during longer idle intervals. A 100 mV reference can provide 49 µV input-referred resolution for small sensor signals, although the reference and signal-conditioning circuitry must remain low-power to preserve battery life. In a complete instrument, the converter can digitize the sensor output before the data is stored or transmitted by an embedded controller.

🌐

Remote Data Acquisition

The ADS7817P is suitable for remote data-acquisition modules that must capture differential analog measurements close to the sensor and transmit digital results over a communications link. Its 200 kSPS conversion rate provides useful throughput for monitoring rapidly changing signals, while the 8-pin mini-DIP package keeps through-hole construction straightforward. The fully differential input helps reject common-mode noise when the sensor, amplifier, and converter share a suitable reference. Designers should provide local reference and bypass capacitors and isolate the analog input routing from digital interface activity to preserve measurement quality.

🏭

Industrial Transducer Interface

The ADS7817P can serve as the sampling element in an industrial transducer interface because its high-impedance differential input supports direct connection to suitable signal-conditioning circuits. The 12-bit converter operates at up to 200 kSPS, allowing it to capture process or physical measurements with better temporal resolution than a slow meter-class ADC. Selecting a reference between 100 mV and 2.5 V determines the input-referred resolution from 49 µV to 1.22 mV. For industrial use, the frontend should include appropriate input protection, filtering, and settling time for the selected sensor and multiplexer configuration.

📊

Multichannel Analog Monitoring

The ADS7817P is appropriate for multichannel monitoring systems in which several analog inputs are scanned through a multiplexer and converted sequentially. A 200 kSPS conversion rate leaves time for input selection and source settling, provided the external network is designed around the converter's acquisition requirements. Differential channels improve common-mode rejection when paired sensor outputs are balanced around the same reference. Engineers should minimize switch resistance, allow adequate settling at the ADC input, and maintain separate analog and digital return paths so that multiplexing transients do not dominate the selected input-referred resolution.

📈

Precision Analog Measurement

The ADS7817P supports precision analog measurement where 12-bit resolution is sufficient but higher sampling speed is needed. With a 100 mV reference, its input-referred resolution is 49 µV; with a 2.5 V reference, it is 1.22 mV. This flexibility allows the reference range to be matched to the signal rather than fixing one input scale. The differential architecture is beneficial for bridge, current, and voltage measurements centered around the reference voltage. Frontend amplifier gain, input resistance, filtering, and reference stability should be evaluated together because they directly affect whether the converter's nominal resolution is retained in the completed system.

🔬

Laboratory and Portable Instrumentation

The ADS7817P is well suited to compact laboratory and portable instruments that need a low-power, differential ADC in an easy-to-handle 8-pin package. Its 200 kSPS sampling rate supports waveform capture and rapid measurement updates, while automatic power-down can reduce consumption between operating cycles. A 100 mV reference offers finer input-referred resolution for low-level transducers, whereas a 2.5 V reference supports a wider measurement range. The board should place input-conditioning components near the converter, use compact stable references, and account for connector leakage when working with very high source impedances.

סיכום מוצרים מומלצים

ADS7817 Functional family member for portable acquisition בשימוש ב-: Battery-Powered Sensor Measurement, Remote Data Acquisition, Multichannel Analog Monitoring, Laboratory and Portable Instrumentation ADS7816 Related precision ADC for comparison בשימוש ב-: Battery-Powered Sensor Measurement, Industrial Transducer Interface, Multichannel Analog Monitoring, Precision Analog Measurement AD7817AR Cross-manufacturer differential ADC candidate בשימוש ב-: Remote Data Acquisition, Industrial Transducer Interface, Precision Analog Measurement, Laboratory and Portable Instrumentation
What are the key specifications of ADS7817P that engineers should know?
The ADS7817P is a 12-bit, 200 kSPS differential sampling ADC in an 8-pin plastic mini-DIP package. Texas Instruments describes a high-impedance fully differential input, automatic power-down, and low-power operation. The reference voltage is adjustable from 100 mV to 2.5 V, corresponding to input-referred resolutions of 49 µV and 1.22 mV at the range endpoints. These parameters make the converter appropriate for transducers, battery-operated systems, remote data acquisition, and multichannel measurement equipment.
What is the operating voltage of ADS7817P?
The exact ADS7817P supply-voltage limits are not stated on the manufacturer product page excerpt, so consult the manufacturer datasheet before establishing the power architecture. The confirmed operating characteristics include 12-bit resolution, a 200 kSPS sampling rate, differential input, automatic power-down, and a reference-voltage range of 100 mV to 2.5 V. The missing supply limits must not be inferred from the reference range because the reference input and analog supply have different operating requirements.
What is the reference voltage range of ADS7817P?
The ADS7817P accepts a reference voltage from 100 mV to 2.5 V. According to the Texas Instruments ADS7817 product information, the corresponding input-referred resolution ranges from 49 µV with a 100 mV reference to 1.22 mV with a 2.5 V reference. The smaller reference range supports sensitive low-level measurements, while the larger range supports wider input spans and higher absolute code resolution.
What is the conversion speed of ADS7817P?
The ADS7817P converts at up to 200 kSPS and produces a 12-bit digital result for each sampling cycle. This combination is suitable for multichannel acquisition, transducer monitoring, and portable data-logging systems that require more throughput than a slow low-resolution meter ADC. In a multichannel design, multiplexer settling time, source impedance, and the acquisition timing of the external interface must be coordinated with the 200 kSPS conversion capability.
Where can I download the ADS7817P datasheet PDF?
The manufacturer ADS7817 datasheet is available through the official Texas Instruments ADS7817 product page, which links to the device documentation. The product page identifies the ADS7817 family as a 12-bit, 200 kSPS differential ADC with a 100 mV to 2.5 V reference range. For the ADS7817P orderable variant, verify the package drawing, pin assignments, recommended operating conditions, and electrical characteristics before finalizing the PCB design.
Where can I find the ADS7817P pinout?
The ADS7817P pinout is shown in the pin-configuration section of the Texas Instruments ADS7817 datasheet. The confirmed package is an 8-pin plastic mini-DIP, also described as an 8-PDIP. Use the numbered package drawing to identify the differential analog inputs, reference, supply, ground, and digital interface functions. Do not assign PCB nets from the general ADC function alone because the exact signal names and alternate digital-interface modes are package-specific.
Is ADS7817P suitable for battery-powered sensor measurement?
Yes, the ADS7817P is suitable for battery-powered sensor measurement because it combines low-power operation, automatic power-down, a high-impedance differential input, and a compact 8-pin mini-DIP package. The automatic power-down function can reduce consumption during inactive intervals. The external sensor and signal-conditioning circuitry must also be selected for low leakage and low supply current so that the complete measurement chain benefits from the converter's low-power behavior.
What can replace ADS7817P with a pin-compatible ADC?
The closest documented replacement direction is the Analog Devices AD7817 family, which uses an 8-pin plastic DIP configuration for the relevant suffix. Replacement is appropriate only after confirming pin-by-pin signal assignments, reference handling, supply limits, timing, acquisition behavior, and temperature range. A matching package and similar resolution do not by themselves guarantee that every timing or power sequence is identical, so the two manufacturers' datasheets should be compared before substitution.
Is ADS7817P the same as AD7817AR?
No. ADS7817P is a Texas Instruments device, while AD7817AR is an Analog Devices product from a different manufacturer. Both are associated with 12-bit, 200 kSPS differential ADC families and an 8-pin through-hole package, making AD7817AR a candidate for evaluation as a drop-in replacement. Confirm that the pin functions, interface timing, reference requirements, acquisition characteristics, and operating limits align before using it as a production substitute.
When should I choose ADS7817P over AD7817AR?
Choose ADS7817P when its verified Texas Instruments pinout, timing, electrical limits, and lifecycle position match the existing design more closely than those of AD7817AR. Choose AD7817AR only when it offers a necessary product-availability or sourcing advantage and a complete manufacturer-level comparison confirms pin compatibility. Both are 12-bit differential ADCs from 200 kSPS families, so resolution and conversion speed alone should not determine the substitution.
What is the best Texas Instruments equivalent for ADS7817P?
The ADS7817P is itself the orderable 8-pin plastic mini-DIP version of the Texas Instruments ADS7817 family. The ADS7817 family also appears in the manufacturer comparison data alongside the ADS7816, but the ADS7816 must not be treated as a drop-in replacement without a pin and functional comparison. For a board that specifically uses the ADS7817P package and timing, retain the exact orderable MPN unless Texas Instruments identifies a documented compatible successor.
Where to buy ADS7817P online?
Use the Request a Quote form on this page to request ADS7817P availability, current lead time, minimum order quantity, and shipment options. The form connects the request directly with XAIPART without requiring static pricing information in the technical description. For design approval, request the exact 8-pin plastic mini-DIP ordering configuration and verify its marking, date code, and shipping condition before releasing a production order.
What is the price of ADS7817P?
Current ADS7817P pricing and quantity availability should be obtained through the Request a Quote form on this page because pricing and inventory can change. Include the required quantity, reel or tube preference, acceptable date code, and target shipment date in the request. The technical specification remains the 12-bit, 200 kSPS differential ADC in the 8-pin plastic mini-DIP package, independent of the commercial quotation.
What is the lead time for ADS7817P?
Request the current ADS7817P lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order quantity, production condition, and shipment destination, so a schedule-specific answer is more useful than a generic statement. Include the required delivery date and acceptable date-code window so the manufacturing and logistics review can assess availability against the actual build schedule.
Is ADS7817P in stock?
Stock status for ADS7817P should be confirmed through the Request a Quote form on this page with the required quantity and packaging preference. The verified product listings identify the component as an 8-pin differential ADC from Texas Instruments, but listing availability can change rapidly. For production planning, request both current inventory and the manufacturer lead-time estimate, and specify whether obsolete or nonstandard date codes are acceptable.
What are the main ADS7817P design considerations?
The main ADS7817P design considerations are reference selection, differential-input implementation, source impedance, acquisition timing, decoupling, and layout isolation. The reference can range from 100 mV to 2.5 V, producing input-referred resolutions of 49 µV to 1.22 mV, so choosing the correct range affects both measurement resolution and required analog headroom. Place reference and bypass capacitors close to their pins, keep the analog input path short, and separate sensitive input routing from digital clock and interface activity.

נתוני עזר הנדסיים עבור ADS7817P — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ADS7817P for a new 12-bit, 200 kSPS differential measurement design that uses an 8-pin plastic mini-DIP and benefits from a confirmed 100 mV to 2.5 V reference range, automatic power-down, and low-power operation. It is particularly suitable for battery-powered sensors, remote acquisition nodes, industrial transducers, and portable instruments. Select ADS7817IP when the same family and package are needed but an industrial temperature grade is required. Evaluate AD7817AR or AD7817BR when a cross-manufacturer replacement is needed, but verify reference range, acquisition timing, interface behavior, supply limits, and absolute electrical ratings before approving either part as a drop-in substitute. The ADS7816 is a related precision ADC in the manufacturer comparison data, not a confirmed substitute for the ADS7817P pinout.

השוואה עם חלופות

פרמטר מוצר זה ADS7817IP AD7817AR AD7817BR
Brand Texas Instruments Texas Instruments Analog Devices Analog Devices
Package 8-pin plastic mini-DIP 8-pin plastic mini-DIP 8-pin plastic mini-DIP 8-pin plastic mini-DIP
Converter Type Sampling ADC Sampling ADC Sampling ADC Sampling ADC
Resolution 12 bit 12 bit 12 bit 12 bit
Sampling Rate 200 kSPS 200 kSPS 200 kSPS 200 kSPS
Input Architecture Fully differential Differential Differential Differential

מבדילים עיקריים

  • Flexible reference range supports both low-level and wider-range measurements (לעומתAD7817AR)
  • Automatic power-down supports duty-cycled acquisition (לעומתAD7817AR)
  • Through-hole 8-pin construction simplifies prototype assembly (לעומתADS7817IP)

הערות תכנון

Route the differential input as a short, symmetrical pair and place input-series resistors or filtering components close to the converter when they are part of the signal-conditioning network. Keep the analog input nodes away from digital output and serial-interface traces. Differential routing helps preserve common-mode rejection, but it only works effectively when both channels have comparable impedance, the source is correctly referenced, and the common-mode voltage remains within the converter's permitted input range.

Place the reference bypass capacitor and supply-decoupling capacitor directly beside their associated pins, with short ground returns. The reference voltage may be selected from 100 mV to 2.5 V, so reference noise and source impedance can materially affect the 49 µV to 1.22 mV input-referred resolution. Use a low-noise reference source and avoid long parallel copper paths that can couple converter or digital switching activity into the reference node.

Do not assume that a 200 kSPS conversion rate is the usable multichannel throughput without accounting for multiplexer settling and acquisition time. The external driver must present a settled voltage at the converter input during the sampling interval. Similarly, automatic power-down should be coordinated with control logic and measurement timing so that the converter has sufficient startup and acquisition time before the next valid conversion is read.

Treat the analog input and reference as precision signal paths rather than general-purpose routing. Guard against leakage from contaminated PCBs, connector cleaning issues, and high-impedance sensor nodes when operating near the 100 mV reference range. If a low reference is selected, verify input bias current, switch leakage, and resistor tolerance because these effects can become significant relative to the 49 µV input-referred resolution.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer product page and distributor excerpts do not state the requested compliance or material-status classifications. Use the current Texas Instruments product documentation and declarations for qualification and environmental compliance decisions.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADS7817P datasheet ADS7817P specifications ADS7817P pinout ADS7817P datasheet pdf ADS7817P 8-PDIP ADS7817P 12 bit ADC ADS7817P 200 kSPS ADS7817P differential input ADS7817P reference voltage ADS7817P replacement ADS7817P vs AD7817AR ADS7817P price ADS7817P stock Texas Instruments ADS7817P ADS7817P application circuit

רכיבים ומונחים קשורים

Texas Instruments ADS7817P ADS7817 ADS7817IP ADS7816 Analog Devices AD7817AR AD7817BR sampling ADC analog-to-digital converter data-converter IC data-acquisition IC fully differential input high-impedance input 200 kSPS 12-bit resolution 100 mV to 2.5 V reference input-referred resolution automatic power-down 8-pin plastic mini-DIP 8-PDIP surface-mount package family battery-powered measurement industrial transducer remote data acquisition
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר