ADS8558IPM - 12-Bit 6-Channel 730 kSPS Simultaneous ADC | TI
MPN: ADS8558IPM ✓ AktifADS8558IPM Genel Bakış
An ADC is a data-converter integrated circuit that transforms continuous analog voltages into numerical values for processing by a microcontroller, DSP, FPGA, or industrial controller. The ADS8558 belongs to the SAR ADC family, where successive approximation selects the digital result one bit at a time. It sits within the broader hierarchy of analog-to-digital converters, data-converter ICs, and semiconductor components used to acquire real-world signals.
The ADS8558IPM is organized as six SAR conversion channels grouped into three pairs. True bipolar input capability allows each channel to measure voltages that extend below ground, while the sample-and-hold architecture supports simultaneous high-speed acquisition of multiple signals. The 12-bit resolution provides 4096 possible digital codes, while the selectable parallel or serial interface supports different processor architectures and communication priorities.
At the maximum parallel-interface data rate, each of the six channels can convert at 730 kSPS. Serial operation supports data rates up to 500 kSPS and can reduce the number of interface signals required on a constrained printed circuit board. The device also supports an internal conversion clock and reference, according to the manufacturer product information, although exact timing, input range, reference voltage, and electrical limit details should be confirmed in the complete manufacturer datasheet before a new design is released.
Typical signal-acquisition uses include industrial process monitoring, motor and drive control, power-system instrumentation, data acquisition systems, and test equipment requiring several channels to be sampled at the same instant. Simultaneous sampling is particularly useful when comparing phase-related voltages, because the separate sample-and-hold circuits reduce timing differences between channels.
PCB implementation should prioritize short, symmetric analog input routes and a quiet reference and supply arrangement. Place input filtering and protection components close to their associated pins, keep digital interface routing away from sensitive analog nodes, and use a solid ground plane with uninterrupted return paths. The LQFP package also requires careful thermal assessment when operated near its maximum specified ambient temperature.
This product page organizes the key ADC characteristics, package information, application guidance, comparison data, and practical design considerations in one place. Engineers should use the manufacturer pin-description table and recommended application circuit when assigning tracks, selecting external components, and validating acquisition timing.
Drop-in alternatifler için ADS8558IPM — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ADS8558IPM (aynı form faktörü ve ayağa oturma) — farklı olan Operating Temperature Range.
ADS8557IPM
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADS8556IPM
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADS8558IPMR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ADS8558IPM Maksimum Değerlendirmeler & Elektriksel Özellikler
| Çözünürlük | 12 bit |
| Number of Channels | 6 channels |
| Conversion Architecture | Successive approximation register (SAR) |
| Maximum Data Rate, Parallel Interface | 730 kSPS per channel |
| Maximum Data Rate, Serial Interface | 500 kSPS per channel |
| Input Type | True bipolar |
| Sampling Method | Simultaneous sampling |
| Sample-and-Hold Circuit | One per channel |
| Channel Grouping | Six channels grouped into three pairs |
| Arayüz | Parallel or serial |
| Paket | 64-pin LQFP (PM) |
| Package Dimensions | 10 mm x 10 mm |
| Montaj Türü | Surface mount |
| İşletim Sıcaklığı Aralığı | -40 °C to +125 °C |
| Conversion Clock | Internal conversion clock supported |
| Reference | Internal reference supported |
| Power Classification | Low-power ADC |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_qualified |
ADS8558IPM 10 mm x 10 mm Pin Yapısı Kılavuzu
ADS8558IPM (10 mm x 10 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ADS8558IPM.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADS8558IPM için uygundur 6 uygulamas: Industrial Process Monitoring, Motor and Drive Control, Power-System Instrumentation, Synchronized Data Acquisition, Test and Measurement Equipment, Audio and Vibration Analysis.
Industrial Process Monitoring
The ADS8558IPM suits industrial process-monitoring systems that must acquire several sensor voltages together. Its six true-bipolar input channels allow each channel to retain a sample-and-hold circuit, supporting simultaneous acquisition at up to 730 kSPS in parallel interface mode. This is useful when pressure, temperature, current, and voltage signals must retain a close timing relationship during a conversion cycle. The 12-bit resolution provides 4096 digital codes, while the parallel or serial interface lets the converter connect to either a high-throughput processor or a controller with fewer interface resources.
Önerilen
Motor and Drive Control
The ADS8558IPM is appropriate for motor-control systems that monitor multiple phase, current, or position-related voltages. Six simultaneously sampled channels provide a consistent acquisition window, while true bipolar inputs are useful for signals centered around ground. The maximum parallel-interface rate of 730 kSPS supports fast control-loop feedback, and the serial option can operate up to 500 kSPS when interface pin count is more important than throughput. Engineers should preserve analog symmetry and provide appropriate source impedance and filtering for each input.
Önerilen
Power-System Instrumentation
The ADS8558IPM can capture multiple bipolar voltages in power-system monitoring equipment, including DC-link, phase, and shunt measurements. Simultaneous sampling helps preserve the relationship among measured quantities, while the 12-bit conversion resolution supports compact protection, logging, and diagnostics systems. The device supports up to 730 kSPS in parallel mode for high-speed analysis or up to 500 kSPS in serial mode for lower pin-count implementations. Protection networks, input filtering, and isolation boundaries must be designed around the datasheet electrical limits.
Önerilen
Synchronized Data Acquisition
The ADS8558IPM fits synchronized data-acquisition systems requiring six channels to be sampled under the same timing conditions. Each input uses a dedicated sample-and-hold circuit, reducing the need to stagger channel selection in multi-sensor measurement systems. Parallel operation reaches 730 kSPS, while serial operation reaches 500 kSPS and can simplify routing into a processor with constrained I/O. For sensitive instrumentation, use a quiet reference arrangement, maintain short analog traces, and separate converter clocks and digital outputs from high-impedance input nodes.
Önerilen
Test and Measurement Equipment
The ADS8558IPM can form the acquisition front end of programmable test equipment requiring several measured nodes to be captured together. Six true-bipolar channels reduce the number of separate converters required when monitoring a multi-node fixture. A throughput of 730 kSPS in parallel mode can support fast sweeps and repetitive measurements, while the serial interface offers a lower pin-count option for compact instruments. Calibration, source impedance, reference stability, and front-end protection are critical to achieving repeatable results.
Önerilen
Audio and Vibration Analysis
The ADS8558IPM is applicable to multichannel vibration, acoustic, or condition-monitoring systems where several sensor outputs must be sampled at a common instant. The six-channel SAR architecture supports up to 730 kSPS in parallel mode, providing sufficient temporal resolution for many vibration-analysis tasks, and true bipolar inputs accommodate sensors with centered waveforms. Designers should use anti-alias filtering, shielded input routing, and careful reference grounding because sensor-level signals can be small and the 12-bit resolution is more appropriate than 16-bit alternatives when conversion speed has priority.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADS8558IPM — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADS8557IPM | ADS8556IPM | ADS8558IPMR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-pin LQFP (PM), 10 mm x 10 mm | 64-pin LQFP (PM) | 64-pin LQFP (PM) | 64-pin LQFP (PM) |
| Resolution | 12 bit | 14 bit | 16 bit | 12 bit |
| Number of Channels | 6 channels | 6 channels | 6 channels | 6 channels |
| Maximum Data Rate, Parallel Interface | 730 kSPS per channel | 670 kSPS per channel | 630 kSPS per channel | 730 kSPS per channel |
| Maximum Data Rate, Serial Interface | 500 kSPS per channel | 470 kSPS per channel | 450 kSPS per channel | 500 kSPS per channel |
| Input Type | True bipolar | True bipolar | True bipolar | True bipolar |
| Sampling Method | Simultaneous sampling | Simultaneous sampling | Simultaneous sampling | Simultaneous sampling |
| Conversion Architecture | SAR | SAR | SAR | SAR |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
Ana Farklılayıcılar
- Higher parallel conversion throughput (karşılaştırma:ADS8557IPM)
- Maximum family throughput in serial mode (karşılaştırma:ADS8556IPM)
- Identical electrical design with alternate reel configuration (karşılaştırma:ADS8558IPMR)
- Resolution-versus-speed tradeoff within one family (karşılaştırma:ADS8556IPM)
Tasarım Notları
Route the six analog inputs as short, symmetric traces to minimize input capacitance and channel-to-channel timing differences. Place input filtering, clamping, or protection components close to the ADC pins rather than at the connector. Keep the parallel-output and serial-interface return paths away from the analog inputs, and provide a continuous ground plane beneath and around the LQFP footprint.
Use the interface mode that matches the receiving device and firmware. Parallel mode supports up to 730 kSPS per channel but requires more routing and careful clock-to-data timing; serial mode supports up to 500 kSPS and reduces interface-pin pressure. Verify output timing, level compatibility, and signal termination against the complete manufacturer timing diagrams before selecting the processor interface.
Provide clean supply and reference connections with low-impedance decoupling placed close to the relevant pins. Reference noise can affect conversion accuracy, so avoid routing digital return currents through the analog-reference area. Confirm bypass-capacitor values, allowable supply ranges, startup behavior, and reference-bypass requirements from the manufacturer application circuit before releasing the schematic.
The ADS8558IPM is rated for operation from -40 °C to +125 °C, but the complete design must remain within the device's power and junction-temperature limits. Account for converter dissipation, PCB copper area, adjacent heat sources, and enclosure temperature. The LQFP footprint has leads on all four sides, so assembly inspection is important for detecting solder bridges that could impair thermal and signal performance.
Uyumluluk Bilgisi
The manufacturer product information identifies ADS8558IPM as operating from -40 °C to +125 °C but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The non-automotive orderable code is not identified as AEC-Q100 qualified.