ADS8558IPM - 12-Bit 6-Channel 730 kSPS Simultaneous ADC | TI
料号: ADS8558IPM ✓ 量产中ADS8558IPM 概述
An ADC is a data-converter integrated circuit that transforms continuous analog voltages into numerical values for processing by a microcontroller, DSP, FPGA, or industrial controller. The ADS8558 belongs to the SAR ADC family, where successive approximation selects the digital result one bit at a time. It sits within the broader hierarchy of analog-to-digital converters, data-converter ICs, and semiconductor components used to acquire real-world signals.
The ADS8558IPM is organized as six SAR conversion channels grouped into three pairs. True bipolar input capability allows each channel to measure voltages that extend below ground, while the sample-and-hold architecture supports simultaneous high-speed acquisition of multiple signals. The 12-bit resolution provides 4096 possible digital codes, while the selectable parallel or serial interface supports different processor architectures and communication priorities.
At the maximum parallel-interface data rate, each of the six channels can convert at 730 kSPS. Serial operation supports data rates up to 500 kSPS and can reduce the number of interface signals required on a constrained printed circuit board. The device also supports an internal conversion clock and reference, according to the manufacturer product information, although exact timing, input range, reference voltage, and electrical limit details should be confirmed in the complete manufacturer datasheet before a new design is released.
Typical signal-acquisition uses include industrial process monitoring, motor and drive control, power-system instrumentation, data acquisition systems, and test equipment requiring several channels to be sampled at the same instant. Simultaneous sampling is particularly useful when comparing phase-related voltages, because the separate sample-and-hold circuits reduce timing differences between channels.
PCB implementation should prioritize short, symmetric analog input routes and a quiet reference and supply arrangement. Place input filtering and protection components close to their associated pins, keep digital interface routing away from sensitive analog nodes, and use a solid ground plane with uninterrupted return paths. The LQFP package also requires careful thermal assessment when operated near its maximum specified ambient temperature.
This product page organizes the key ADC characteristics, package information, application guidance, comparison data, and practical design considerations in one place. Engineers should use the manufacturer pin-description table and recommended application circuit when assigning tracks, selecting external components, and validating acquisition timing.
直接替换替代料: ADS8558IPM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADS8558IPM (相同外形与封装尺寸) ——差异在于 Operating Temperature Range.
ADS8557IPM
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →ADS8556IPM
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →ADS8558IPMR
✅ 直接替换📋 参考替代料(不在目录中)
ADS8558IPM 最大额定值与电气特性
| 分辨率 | 12 bit |
| Number of Channels | 6 channels |
| Conversion Architecture | Successive approximation register (SAR) |
| Maximum Data Rate, Parallel Interface | 730 kSPS per channel |
| Maximum Data Rate, Serial Interface | 500 kSPS per channel |
| Input Type | True bipolar |
| Sampling Method | Simultaneous sampling |
| Sample-and-Hold Circuit | One per channel |
| Channel Grouping | Six channels grouped into three pairs |
| 接口 | Parallel or serial |
| 封装 | 64-pin LQFP (PM) |
| Package Dimensions | 10 mm x 10 mm |
| 安装类型 | Surface mount |
| 工作温度范围 | -40 °C to +125 °C |
| Conversion Clock | Internal conversion clock supported |
| Reference | Internal reference supported |
| Power Classification | Low-power ADC |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_qualified |
ADS8558IPM 10 mm x 10 mm 引脚配置指南
ADS8558IPM(10 mm x 10 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADS8558IPM.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADS8558IPM 适用于 6 应用s: Industrial Process Monitoring, Motor and Drive Control, Power-System Instrumentation, Synchronized Data Acquisition, Test and Measurement Equipment, Audio and Vibration Analysis.
Industrial Process Monitoring
The ADS8558IPM suits industrial process-monitoring systems that must acquire several sensor voltages together. Its six true-bipolar input channels allow each channel to retain a sample-and-hold circuit, supporting simultaneous acquisition at up to 730 kSPS in parallel interface mode. This is useful when pressure, temperature, current, and voltage signals must retain a close timing relationship during a conversion cycle. The 12-bit resolution provides 4096 digital codes, while the parallel or serial interface lets the converter connect to either a high-throughput processor or a controller with fewer interface resources.
推荐
Motor and Drive Control
The ADS8558IPM is appropriate for motor-control systems that monitor multiple phase, current, or position-related voltages. Six simultaneously sampled channels provide a consistent acquisition window, while true bipolar inputs are useful for signals centered around ground. The maximum parallel-interface rate of 730 kSPS supports fast control-loop feedback, and the serial option can operate up to 500 kSPS when interface pin count is more important than throughput. Engineers should preserve analog symmetry and provide appropriate source impedance and filtering for each input.
推荐
Power-System Instrumentation
The ADS8558IPM can capture multiple bipolar voltages in power-system monitoring equipment, including DC-link, phase, and shunt measurements. Simultaneous sampling helps preserve the relationship among measured quantities, while the 12-bit conversion resolution supports compact protection, logging, and diagnostics systems. The device supports up to 730 kSPS in parallel mode for high-speed analysis or up to 500 kSPS in serial mode for lower pin-count implementations. Protection networks, input filtering, and isolation boundaries must be designed around the datasheet electrical limits.
推荐
Synchronized Data Acquisition
The ADS8558IPM fits synchronized data-acquisition systems requiring six channels to be sampled under the same timing conditions. Each input uses a dedicated sample-and-hold circuit, reducing the need to stagger channel selection in multi-sensor measurement systems. Parallel operation reaches 730 kSPS, while serial operation reaches 500 kSPS and can simplify routing into a processor with constrained I/O. For sensitive instrumentation, use a quiet reference arrangement, maintain short analog traces, and separate converter clocks and digital outputs from high-impedance input nodes.
推荐
Test and Measurement Equipment
The ADS8558IPM can form the acquisition front end of programmable test equipment requiring several measured nodes to be captured together. Six true-bipolar channels reduce the number of separate converters required when monitoring a multi-node fixture. A throughput of 730 kSPS in parallel mode can support fast sweeps and repetitive measurements, while the serial interface offers a lower pin-count option for compact instruments. Calibration, source impedance, reference stability, and front-end protection are critical to achieving repeatable results.
推荐
Audio and Vibration Analysis
The ADS8558IPM is applicable to multichannel vibration, acoustic, or condition-monitoring systems where several sensor outputs must be sampled at a common instant. The six-channel SAR architecture supports up to 730 kSPS in parallel mode, providing sufficient temporal resolution for many vibration-analysis tasks, and true bipolar inputs accommodate sensors with centered waveforms. Designers should use anti-alias filtering, shielded input routing, and careful reference grounding because sensor-level signals can be small and the 12-bit resolution is more appropriate than 16-bit alternatives when conversion speed has priority.
推荐
推荐产品汇总
工程参考数据: ADS8558IPM ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADS8557IPM | ADS8556IPM | ADS8558IPMR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-pin LQFP (PM), 10 mm x 10 mm | 64-pin LQFP (PM) | 64-pin LQFP (PM) | 64-pin LQFP (PM) |
| Resolution | 12 bit | 14 bit | 16 bit | 12 bit |
| Number of Channels | 6 channels | 6 channels | 6 channels | 6 channels |
| Maximum Data Rate, Parallel Interface | 730 kSPS per channel | 670 kSPS per channel | 630 kSPS per channel | 730 kSPS per channel |
| Maximum Data Rate, Serial Interface | 500 kSPS per channel | 470 kSPS per channel | 450 kSPS per channel | 500 kSPS per channel |
| Input Type | True bipolar | True bipolar | True bipolar | True bipolar |
| Sampling Method | Simultaneous sampling | Simultaneous sampling | Simultaneous sampling | Simultaneous sampling |
| Conversion Architecture | SAR | SAR | SAR | SAR |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
关键差异点
- Higher parallel conversion throughput (对比 ADS8557IPM)
- Maximum family throughput in serial mode (对比 ADS8556IPM)
- Identical electrical design with alternate reel configuration (对比 ADS8558IPMR)
- Resolution-versus-speed tradeoff within one family (对比 ADS8556IPM)
设计说明
Route the six analog inputs as short, symmetric traces to minimize input capacitance and channel-to-channel timing differences. Place input filtering, clamping, or protection components close to the ADC pins rather than at the connector. Keep the parallel-output and serial-interface return paths away from the analog inputs, and provide a continuous ground plane beneath and around the LQFP footprint.
Use the interface mode that matches the receiving device and firmware. Parallel mode supports up to 730 kSPS per channel but requires more routing and careful clock-to-data timing; serial mode supports up to 500 kSPS and reduces interface-pin pressure. Verify output timing, level compatibility, and signal termination against the complete manufacturer timing diagrams before selecting the processor interface.
Provide clean supply and reference connections with low-impedance decoupling placed close to the relevant pins. Reference noise can affect conversion accuracy, so avoid routing digital return currents through the analog-reference area. Confirm bypass-capacitor values, allowable supply ranges, startup behavior, and reference-bypass requirements from the manufacturer application circuit before releasing the schematic.
The ADS8558IPM is rated for operation from -40 °C to +125 °C, but the complete design must remain within the device's power and junction-temperature limits. Account for converter dissipation, PCB copper area, adjacent heat sources, and enclosure temperature. The LQFP footprint has leads on all four sides, so assembly inspection is important for detecting solder bridges that could impair thermal and signal performance.
合规信息
The manufacturer product information identifies ADS8558IPM as operating from -40 °C to +125 °C but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The non-automotive orderable code is not identified as AEC-Q100 qualified.