BCM5482SA1IFB - Dual-Port Gigabit Ethernet PHY | Broadcom
MPN: BCM5482SA1IFB ✓ AktifBCM5482SA1IFB Genel Bakış
An Ethernet transceiver such as the BCM5482SA1IFB belongs to the physical-layer IC category within the broader hierarchy of network-interface ICs, Ethernet controllers, and semiconductor interface devices. It converts between digital data interfaces and copper Ethernet physical channels, while supporting both 10 Mb/s, 100 Mb/s, and 1000 Mb/s operation. Integrating two ports in one package can reduce component count when equipment requires multiple network connections.
Key features include a dual-port 10/100/1000BASE-T configuration, integrated full-duplex transceiver operation, and a 121-ball BGA package. The RGMII clock timing can be adjusted to compensate for PCB trace delay, reducing sensitivity to routing length and helping simplify system-level timing design. These features make the device applicable to IP phones, network terminals, access equipment, and other products requiring compact multiport Ethernet connectivity.
The BCM5482SA1IFB is particularly relevant to space-constrained designs because one package provides two Gigabit Ethernet channels. Compared with using separate single-port PHYs, consolidation can simplify the bill of materials and reduce the number of routed network channels on the PCB. The RGMII timing-adjustment capability further supports practical board implementation by allowing interface timing to be tuned for propagation delay introduced by printed-circuit traces.
Typical applications include dual-port IP phones, VoIP terminals, customer-premises equipment, network interface controllers, industrial Ethernet endpoints, and embedded gateways. In an IP phone, the device can connect a processor or application controller to two copper Ethernet ports while using the RGMII interface for data transfer. In a compact gateway, the same integration can conserve board area and reduce component count.
Designers should confirm the required PHY features, supported RGMII modes, electrical characteristics, and thermal limits against the manufacturer datasheet before schematic release. PCB layout must follow the package ball map and recommended high-speed and power-distribution guidance. RGMII trace timing, clock routing, return paths, and decoupling should be evaluated together because interface timing margin depends on the complete interconnect.
This page organizes the BCM5482SA1IFB into practical selection, application, comparison, and design-guidance sections. It highlights the part's dual-port Gigabit Ethernet role, 121-BGA footprint, and adjustable RGMII clock timing while clearly separating confirmed characteristics from parameters that require design review.
Drop-in alternatifler için BCM5482SA1IFB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
BCM5482SA2IFBG
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
BCM5482SEA2IFB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
BCM5482SA1IFB Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Dual-port 10/100/1000BASE-T Ethernet transceiver |
| Number of Ethernet Ports | 2 ports |
| Supported Ethernet Speeds | 10 Mb/s, 100 Mb/s, and 1000 Mb/s |
| Physical Layer Standard | 10/100/1000BASE-T |
| Transceiver Configuration | 2/2 full-duplex transceiver configuration |
| Digital Interface | RGMII |
| RGMII Clock Timing Adjustment | Adjustable |
| Package Type | 121-pin BGA |
| Pin Sayısı | 121 pins |
| Montaj Türü | Surface mount |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
BCM5482SA1IFB 121-pin bga Pin Yapısı Kılavuzu
BCM5482SA1IFB (121-pin bga paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: BCM5482SA1IFB.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
BCM5482SA1IFB için uygundur 6 uygulamas: Dual-Port IP Phone, VoIP Network Terminal, Customer Premises Equipment, Industrial Ethernet Gateway, Network Interface Controller, Embedded Ethernet Bridge.
Dual-Port IP Phone
The BCM5482SA1IFB fits a dual-port IP phone that must expose both 10/100/1000BASE-T connections while keeping the PCB compact. Its two integrated Ethernet physical layers provide two full-duplex channels in one 121-pin BGA rather than requiring separate single-port PHY packages. The RGMII interface carries high-speed parallel data between the PHY and application controller, while adjustable clock timing helps accommodate PCB propagation delay. This integration reduces component count and routing complexity, although the final design still requires careful BGA escape routing, decoupling, RGMII length matching, and thermal qualification for the phone's enclosure and power budget.
Önerilen
VoIP Network Terminal
The BCM5482SA1IFB is appropriate for a VoIP terminal that combines one Ethernet link for network connectivity with a second link for a downstream device, phone, or pass-through connection. Supporting 10, 100, and 1000 Mb/s allows the terminal to negotiate the highest rate supported by the attached network. Two physical-layer channels in a single 121-pin BGA simplify the component arrangement in space-constrained hardware. The primary engineering trade-off is that RGMII timing must remain reliable across PCB temperature and manufacturing variation, so clock adjustment should be characterized using the final stack-up rather than a generic simulation assumption.
Önerilen
Customer Premises Equipment
The BCM5482SA1IFB can serve dual-port customer-premises equipment that must terminate copper Ethernet on a compact board. Its 10/100/1000BASE-T capability supports access-network links operating at different negotiated rates, while the two-port integration avoids placing two independent PHY packages on the PCB. The RGMII interface provides a direct digital connection to a network controller or communications processor. For an enclosure-mounted CPE product, designers should still check the manufacturer's recommended copper and magnetics interface details, verify regulatory implementation requirements, and validate the 121-BGA assembly process before committing to a high-volume production layout.
Önerilen
Industrial Ethernet Gateway
The BCM5482SA1IFB is well matched to a compact industrial gateway requiring two Gigabit-capable copper Ethernet connections. Integrating both 10/100/1000BASE-T PHYs into one 121-pin BGA reduces board area and component count compared with a discrete two-PHY arrangement. Adjustable RGMII clock timing gives the design team a mechanism for accommodating trace delay introduced by the final multilayer PCB. Industrial deployment also requires attention to operating-temperature limits, power-loss behavior, surge mitigation, and grounding. Those details should be confirmed against the manufacturer datasheet and the gateway's external network-protection circuitry before production release.
Önerilen
Network Interface Controller
The BCM5482SA1IFB can provide the physical layer beneath a dedicated network interface controller or communications processor. Two RGMII-connected 10/100/1000BASE-T channels allow one host processor or controller to manage two Ethernet links without separate PHY packages. The resulting shared-device architecture can simplify software-visible link management and reduce PCB component count. The main design responsibility is signal integrity across the RGMII host interface, particularly clock jitter, skew, lane alignment, and package-exit delay. Use the manufacturer's recommended topology and timing configuration, and keep high-speed traces away from noisy switching nodes and Ethernet magnetics.
Önerilen
Embedded Ethernet Bridge
The BCM5482SA1IFB fits an embedded Ethernet bridge that needs to translate between a digital processor interface and two copper network ports. Supporting 10, 100, and 1000 Mb/s allows each link to negotiate independently with connected equipment. Combining the two physical layers in one 121-pin BGA is especially useful where board area is constrained by a connector-dense front panel. The adjustable RGMII clock timing can reduce sensitivity to board-trace delay, but the setting must be established from the actual routed topology. Production validation should include negotiated-speed testing, packet-transfer integrity, power cycling, and compatibility testing with the intended magnetics and connector implementation.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: BCM5482SA1IFB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | BCM5482SA2IFBG | BCM5482SEA2IFB |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | 121-BGA | 121-BGA | 121-BGA |
| Device Type | Dual-port 10/100/1000BASE-T Ethernet transceiver | Dual-port 10/100/1000BASE-T Ethernet transceiver | Dual-port 10/100/1000BASE-T Ethernet PHY |
| Ethernet Port Count | 2 ports | 2 ports | 2 ports |
| Supported Speeds | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s |
| Pin Count | 121 pins | 121 pins | 121 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount |
Ana Farklılayıcılar
- Two Gigabit-capable Ethernet channels in one package (karşılaştırma:BCM5482SA2IFBG)
- Adjustable RGMII clock timing (karşılaştırma:BCM5482SEA2IFB)
- Compact two-port integration for terminal equipment (karşılaştırma:BCM5482SA2IFBG)
Tasarım Notları
Route RGMII clock, data, and control signals as a matched interface and use the BCM5482 adjustable clock-timing feature to compensate for the actual routed delay. Keep the BGA escape paths short, provide continuous return planes, and avoid splitting supply planes beneath the device. Validate timing after final-layer assignment because changing layer transitions can alter skew and propagation delay even when nominal trace lengths remain unchanged.
Implement the 121-BGA footprint with the manufacturer-recommended pad, solder-mask, and paste geometry, and verify the ball map against the exact ordering variant. Place input and output decoupling capacitors close to their designated BGA balls while maintaining a low-impedance ground reference. X-ray or equivalent assembly inspection is advisable because hidden solder defects under the BGA can create intermittent Ethernet or RGMII failures.
Separate the RGMII clocks and data paths from Ethernet magnetics, switching regulators, and other high-current or high-edge-rate nodes. Use uninterrupted reference planes and check RGMII setup and hold timing with board-level compensation, including temperature and manufacturing variation. Ethernet copper-channel validation remains necessary because compliant PHY timing does not by itself guarantee compliance at the connector without the intended external network interface.
Uyumluluk Bilgisi
The manufacturer documentation identifies BCM5482 as a dual-port Ethernet PHY family, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. Compliance status must be confirmed for the exact ordering code and manufacturing site before procurement.