Maxim Integrated

DG413DY+T - Quad SPST Analog Switch | Maxim Integrated

MPN: DG413DY+T ✓ Aktif
250 pA maximum Id 35 ohm Rds(on) 16-SOIC, 0.154 inch / 3.90 mm body width Package
MOQ: 1 |

DG413DY+T Genel Bakış

The Maxim Integrated DG413DY+T is a monolithic quad SPST CMOS analog switch designed for low-voltage signal routing in test, measurement, communication, and instrumentation systems. It provides four independent single-pole throw switches with normally open and normally closed contacts, a 1:1 multiplexing arrangement, 35 ohm on-resistance, and a 16-pin SOIC package. The device is suitable for analog and digital signal switching where a compact, low-power multiplexer is required.

An analog switch is an electronic routing component that connects or disconnects signal paths under digital control. The DG413DY+T belongs to the broader multiplexer and demultiplexer hierarchy within interface ICs. Its CMOS control inputs are compatible with TTL and CMOS logic, allowing the four channels to be operated independently from a microcontroller, FPGA, or test-system controller.

Key features include low on-resistance matching between switches, with a maximum variation of 3 ohms, and guaranteed on-resistance flatness across the signal range of up to 4 ohms. The device also features low charge injection, low power consumption, and ESD tolerance of at least 2000 V per Method 3015.7. These characteristics help preserve signal integrity when the same analog path is shared by several measurement or control channels.

The DG413DY+T is designed around a monolithic quad-SPST architecture. Each switch uses separate control and signal terminals, making it possible to route one source to one destination or disconnect a signal completely. The low leakage specification of 250 pA maximum helps limit unwanted coupling between high-impedance nodes when a switch is open. The 16-SOIC package supports conventional surface-mount PCB assembly while keeping the four channels in a compact layout.

Typical uses include battery-powered test equipment, data-acquisition systems, analog signal conditioning, sample-and-hold circuits, communication routing, and industrial control systems. The device is especially useful when a design needs flexible selection between normally open and normally closed paths, controlled isolation of unused inputs, or independent switching of several low-frequency analog signals.

For PCB design, keep control traces away from high-impedance signal nodes and route analog inputs and outputs with short, symmetric traces. Confirm the supply voltage, logic thresholds, signal range, and operating temperature against the manufacturer datasheet before production release. This page combines device specifications, sourcing guidance, compatible alternatives, and practical analog-switch design considerations for faster engineering evaluation.

Drop-in alternatifler için DG413DY+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller DG413DY+T (aynı form faktörü ve ayağa oturma) — farklı olan Package, Number of Channels, Number of Circuits, Operating Temperature.

Analog Devices
Package: 16-SOIC, 0.154 inch width, 3.90 mm width
Number of Channels: 4
Number of Circuits: 4
İle Karşılaştır DG413DY+T →
Vishay Intertechnology
Package: SOIC-16 (16-SOIC)
Number of Channels: 4 (SPST, normally open)
Operating Temperature: -40C to +85C
İle Karşılaştır DG413DY+T →

DG413DY-E3

✅ Yerleştirme
Vishay Intertechnology
📦 16-SOIC
Quad SPST CMOS Analog Switch · 4 (SPST, normally open) · 4 Circuit IC Switch, 1:1 · 35 ohm (typ) · 110 ns (typ) · 15 V · 44 V · 0.35 uW (ultra low)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

DG413DY-T

✅ Yerleştirme
📦 16-SOIC
Same DG413 4-circuit SPST family and 16-SOIC footprint; -T packaging/order-code suffix differs from +T

📋 Katalogda Olmayan Referans Alternatifi

DG413DY-T1

✅ Yerleştirme
📦 16-SOIC
Same 4-circuit 1:1 35 ohm SPST description and 16-SOIC footprint; Vishay order-code suffix differs

📋 Katalogda Olmayan Referans Alternatifi

DG413DY-E3

✅ Yerleştirme
Vishay Intertechnology
📦 16-SOIC
Quad SPST CMOS Analog Switch · 4 (SPST, normally open) · 4 Circuit IC Switch, 1:1 · 35 ohm (typ) · 110 ns (typ) · 15 V · 44 V · 0.35 uW (ultra low)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

DG413DY+

✅ Yerleştirme
Analog Devices
📦 16-SOIC
SPST · 4 · 4 · 1:1 · 45 Ω maximum · 3 Ω maximum · 4 Ω maximum · 4.5 V to 30 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

DG413DY+T Maksimum Değerlendirmeler & Elektriksel Özellikler

Number of Circuits 4 circuits
Switch Configuration 4 independent SPST switches
Multiplexer Configuration 1:1
On-Resistance 35 ohm
On-Resistance Matching 3 ohm maximum
On-Resistance Flatness 4 ohm maximum variation
Leakage Current 250 pA maximum
ESD Tolerance 2000 V minimum per Method 3015.7
Logic Input Levels TTL and CMOS compatible
İşletim Sıcaklığı -40 °C to +85 °C
Paket 16-SOIC, 0.154 inch / 3.90 mm body width
Montaj Türü Surface mount
Packaging Bulk
Product Status Active
RoHS Compliance Compliant
Pin Sayısı 16 pins

DG413DY+T 16-soic, 0.154 inch / 3.90 mm body width Pin Yapısı Kılavuzu

DG413DY+T (16-soic, 0.154 inch / 3.90 mm body width paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-soic, 0.154 inch / 3.90 mm body width paket pin çizelgesi için DG413DY+T

Ayrıntılı pin çıkış verisi mevcut değil: DG413DY+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

DG413DY+T için uygundur 6 uygulamas: Battery-Powered Test and Measurement Systems, Data Acquisition and Sensor Multiplexing, Analog Signal Conditioning, Communication and Test Signal Routing, Industrial Control Signal Isolation, Programmable Instrumentation and Calibration.

🔧

Battery-Powered Test and Measurement Systems

The DG413DY+T fits portable measurement equipment where four analog paths must be selected under digital control. Its four independent SPST channels provide normally open and normally closed contacts, while the 35 ohm on-resistance is suitable for low-frequency signal routing rather than high-impedance precision networks. The manufacturer’s family description highlights low power consumption, low charge injection, and low leakage, which help preserve measurement stability when the instrument switches between sensors or calibration points. Place the device close to the source and destination nodes, use a controlled reference ground, and confirm the actual signal bandwidth and settling behavior in the system prototype.

🧩

Data Acquisition and Sensor Multiplexing

The DG413DY+T is useful in data-acquisition front ends that require independent routing among several sensor or conditioning nodes. Four separate SPST channels can connect one source to one destination at a time, and the 250 pA maximum leakage specification helps limit unwanted interaction in high-impedance circuits. The 3 ohm maximum matching between switches and 4 ohm maximum flatness variation are valuable when channel resistance must not introduce large gain differences. Designers should still verify input overdrive, bandwidth, charge injection, and off leakage against the manufacturer datasheet before using the switch directly at the sensor input.

⚡

Analog Signal Conditioning

The DG413DY+T can route analog signals around amplifiers, filters, or calibration elements in a signal-conditioning board. Its 35 ohm on-resistance adds a finite insertion resistance, making the device most appropriate where the source impedance and downstream amplifier impedance are compatible with that load. The low on-resistance matching and flatness help maintain consistent behavior across the four channels, while TTL- and CMOS-compatible control allows direct interfacing with common digital controllers. Keep traces short and use a solid ground reference to limit injection from control signals. Validate settling time and channel-to-channel delay when precise measurement timing is required.

🌐

Communication and Test Signal Routing

The DG413DY+T can provide programmable routing in communication equipment, automated test fixtures, and signal-interface boards. Its four independent normally open/normally closed SPST channels allow a controller to connect, isolate, or disconnect multiple lines without changing the external package footprint. The 16-SOIC format is convenient for conventional surface-mount assembly, and the 2000 V minimum ESD tolerance provides a defined protection target under Method 3015.7. Designers should still protect the signal path against excessive overvoltage, observe the specified supply limits, and verify that control transitions do not create unacceptable coupling on sensitive nodes.

🏭

Industrial Control Signal Isolation

The DG413DY+T can isolate or connect control and instrumentation lines in industrial electronics while keeping the switching element compact. The independently controlled SPST channels are useful when each line needs a different on/off state, and the normally closed contacts provide a defined fallback path during power transitions where appropriate. The device operates across a -40 °C to +85 °C range, making it suitable for many industrial temperature environments, subject to the complete electrical ratings. Use the control inputs only from compatible logic levels and confirm whether the application requires fail-safe default states, isolation resistance, or reinforced spacing beyond the device specifications.

📺

Programmable Instrumentation and Calibration

The DG413DY+T supports programmable signal paths in calibration and instrumentation equipment where a controller selects among external references, injects test signals, or disconnects unused inputs. Its low charge injection is relevant when switching networks around sensitive measurement nodes, while low power consumption helps portable and compact systems. Four channels can be managed with standard digital control, and the SOIC-16 package simplifies assembly where a larger multiplexer would be unnecessary. For best results, establish a repeatable settling period after each switch command, use low-leakage surrounding nodes when appropriate, and verify that the 35 ohm path resistance is acceptable for the selected source and load.

What is the DG413DY+T?
The DG413DY+T is a Maxim Integrated monolithic quad SPST CMOS analog switch with four independent switch channels in a 16-SOIC package. According to the manufacturer product information, it is a 1:1 switch with 35 ohm on-resistance, TTL- and CMOS-compatible control inputs, low charge injection, low power consumption, and ESD tolerance of at least 2000 V per Method 3015.7.
How many switches does DG413DY+T contain?
The DG413DY+T contains four independent SPST switches. Each channel can connect or disconnect its own analog signal path and includes normally open and normally closed contacts. The manufacturer describes the device as a 1:1 multiplexer arrangement, making it useful for independent signal routing rather than selecting one source among many inputs.
What is the on-resistance of DG413DY+T?
The DG413DY+T has a nominal on-resistance of 35 ohm according to the product description. The redesigned DG411, DG412, and DG413 family also provides matching between switches of 3 ohm maximum and on-resistance flatness of 4 ohm maximum across the signal range. These characteristics help reduce gain variation when different channels are selected.
Is DG413DY+T suitable for high-impedance analog signals?
The DG413DY+T can be used with high-impedance analog signals when the system design accounts for its 250 pA maximum leakage and its off-state behavior. Low leakage is useful in buffer, measurement, and data-acquisition circuits because it reduces unwanted node movement. The signal amplitude, bandwidth, temperature, and leakage effects should still be checked against the manufacturer datasheet.
What is the difference between DG413DY+T and DG413DY?
The DG413DY+T and DG413DY belong to the same DG413 family and are described as 4-circuit, 1:1, 35 ohm SPST devices in 16-SOIC packages. The DG413DY listing identifies Analog Devices or Maxim Integrated as the manufacturer, while the DG413DY listing is associated with Renesas Electronics. Use the exact manufacturer datasheet and ordering information when deciding between source variants.
What is the best drop-in replacement for DG413DY+T?
The closest drop-in candidates are DG413-family devices with the same 16-SOIC footprint and four SPST channels. DG413DY, DG413DY-T, DG413DY-T1, and DG413DY-E3 appear in the cross-reference results with the same package and switch description. Verify supply voltage, logic levels, on-resistance, leakage, and control polarity for the selected manufacturer before substitution.
Can DG413DY+T replace TS5A23157?
No. The cross-reference information specifically states that the DG413DY+T is not a direct drop-in replacement for the TS5A23157 because the DG413DY+T is a quad SPST analog switch with separate NO and NC contacts, while the TS5A23157 is a dual SPDT switch. Their control-line counts and PCB routing requirements differ, so a board redesign would be required.
Where can I download the DG413DY+T datasheet?
The manufacturer DG411, DG412, and DG413 datasheet is available through the Renesas Electronics document page, while the Analog Devices product page provides the family overview. The DG413DY+T order code identifies the tube-packaged 16-SOIC version of the DG413 device. Use the manufacturer document to confirm the exact pin assignment, absolute maximum ratings, and electrical characteristics.
Where can I find the DG413DY+T pinout?
The DG413DY+T uses a 16-SOIC package, and its authoritative pin assignment is shown in the DG411, DG412, and DG413 manufacturer datasheet. Use the pin-description table and package drawing when assigning SOIC pins, because the exact NC and control-pin locations must be taken from the datasheet rather than inferred from the generic package outline.
How should the DG413DY+T be powered?
The DG413DY+T requires an appropriate supply voltage and compatible digital control levels for its CMOS analog-switch circuitry. The device supports TTL- and CMOS-compatible control inputs, but the exact allowable supply range, quiescent current, and absolute maximum ratings must be confirmed in the manufacturer datasheet. Decouple the supply close to the IC and avoid exceeding the specified operating limits.
Is DG413DY+T RoHS compliant?
The cross-reference information identifies the DG413DY+T as RoHS compliant and describes it as an active SOIC-16 analog-switch IC. REACH status and other environmental declarations should be confirmed against the specific manufacturer product documentation or declaration for the exact order code. Compliance of one order code should not be assumed for every related DG413 variant.
Where can I buy DG413DY+T?
Use the Request a Quote form on this page to request current DG413DY+T pricing, stock, and lead time. The exact order code is also listed by authorized distributors, but inventory and commercial terms can change without notice. The manufacturer documentation should be used to confirm authenticity and the required 16-SOIC packaging configuration.
What is the lead time for DG413DY+T?
Current lead time for DG413DY+T should be requested through the Request a Quote form on this page. The available product listing identifies the device as active, but it does not establish a fixed production lead time for every order quantity. Packaging, customer volume, and supply status can affect the schedule.
Is DG413DY+T currently active?
The DG413DY+T is listed as an active product in the available product information. The DG413 family remains documented by the manufacturer, and the target order code is associated with the 16-SOIC configuration. For lifecycle planning, periodically confirm the exact order code, package form, and production status through the Request a Quote workflow.
What are the key specifications of DG413DY+T?
The DG413DY+T is a four-channel, 1:1, normally open/normally closed SPST CMOS analog switch in 16-SOIC. Key specifications include 35 ohm on-resistance, 3 ohm maximum on-resistance matching, 4 ohm maximum on-resistance flatness, 250 pA maximum leakage, TTL/CMOS-compatible control, and ESD tolerance of at least 2000 V per Method 3015.7.

Mühendislik referans verileri: DG413DY+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the DG413DY+T when the design requires four independent SPST analog switches with normally open and normally closed contacts, 35 ohm on-resistance, and a 16-SOIC footprint. DG413DY, DG413DY-T, DG413DY-T1, and DG413DY-E3 are the closest drop-in candidates when supply sourcing or manufacturer ownership is important, but their exact electrical ratings and order-code meanings should be checked before substitution. The TS5A23157 is not a direct replacement because it is a dual SPDT switch with different control requirements. For designs needing extremely low resistance, wide bandwidth, or a different multiplex ratio, select a dedicated low-resistance analog switch instead of assuming family compatibility. Confirm temperature range, logic thresholds, leakage, ESD requirements, package form, and lifecycle status using the exact manufacturer datasheet.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün DG413DY DG413DY-T DG413DY-T1 DG413DY-E3 DG413DY+
Package 16-SOIC, 0.154 inch / 3.90 mm width 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Maxim Integrated Renesas Electronics Renesas Electronics Vishay Siliconix Vishay Siliconix Maxim Integrated

Ana Farklılayıcılar

  • Four independently controlled SPST channels in one 16-SOIC package (karşılaştırma:TS5A23157)
  • Defined leakage specification for high-impedance routing (karşılaştırma:DG413DY-T1)
  • Low on-resistance variation across the signal range (karşılaştırma:DG413DY-E3)

Tasarım Notları

Treat each SPST path as a 35 ohm series resistance and include that resistance in the source-to-load calculation. For high-impedance nodes, use short traces, a continuous ground reference, and a defined settling interval after switching. The manufacturer's family specification gives 3 ohm maximum matching between switches and 4 ohm maximum on-resistance flatness, which are useful checks when channel-dependent gain error matters.

Route the four analog channels with consistent geometry and keep the SOIC-16 control pins away from sensitive analog traces where practical. Use a quiet analog ground connection and place supply-decoupling capacitance close to the device pins according to the manufacturer layout guidance. Because the exact pin names and NC locations are not reproduced here, use the pin-description table in the manufacturer datasheet when assigning tracks.

Do not substitute a dual SPDT device for the DG413DY+T without redesigning the board. The TS5A23157, for example, has a different switch architecture and control arrangement. Also verify supply voltage, logic thresholds, input overdrive, leakage, and absolute maximum ratings before production; the same SOIC outline alone does not guarantee electrical compatibility.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
[Data Needed: Lead-Free Status]
Klorofillerden Arınmış
[Data Needed: Halogen-Free Status]
Çatışma Minerali
Unknown

RoHS compliance is identified in the cross-reference information. Other environmental declarations require confirmation for the exact order code and manufacturer.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

DG413DY+T datasheet DG413DY+T pinout DG413DY+T specifications Maxim Integrated DG413DY+T DG413DY+T equivalent DG413DY+T drop-in replacement DG413DY+T cross reference DG413DY+T vs DG413DY-T DG413DY+T 16-SOIC DG413DY+T analog switch DG413DY+T price DG413DY+T stock DG413DY+T schematic DG413DY+T footprint

İlgili Bileşenler ve Terimler

Maxim Integrated Analog Devices DG413DY+T DG413DY DG413DY-T DG413DY-T1 DG413DY-E3 DG411 DG412 DG413 TS5A23157 ADG413BRZ-REEL analog switch SPST switch multiplexer demultiplexer interface IC CMOS TTL SOIC-16 surface mount on-resistance charge injection leakage current ESD tolerance Method 3015.7 RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle