LAST TIME BUY NOTICE: EFM32TG210F16-QFN32T son sipariş tarihi yaklaşmakta. Son sipariş tarihi: Bize Ulaşın. Kullanılabilir alternatif parçaları görüntüle →
Silicon Labs

EFM32TG210F16-QFN32T - 32MHz Cortex-M3 16KB MCU | Silicon Labs

MPN: EFM32TG210F16-QFN32T ✗ Son Kullanım Zamanı
1.85 V to 3.8 V Vdss 150 µA/MHz Id 32-pin QFN, 6 x 6 mm Package 32 MHz Speed 16 KB Memory
MOQ: 1 |

EFM32TG210F16-QFN32T Genel Bakış

Silicon Labs EFM32TG210F16-QFN32T is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz clock, 16 KB of Flash memory, and a 32-pin QFN 6 x 6 mm package. It is designed for low-power embedded systems, combining a RISC processor, integrated analog and communication peripherals, and energy-saving sleep modes in one compact surface-mount device.

An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing performance while minimizing energy consumption during active and idle operation. The EFM32 Tiny Gecko family combines an ARM Cortex-M3 CPU with autonomous peripherals and dedicated low-power hardware. This allows a system to monitor or control external activity while the processor sleeps, reducing the time and energy required for wake-up and repeated polling.

Key characteristics include a 32 MHz maximum operating frequency, 16 KB Flash, 4 KB RAM, AES hardware support, three operational amplifiers, and a 1.85 V to 3.8 V supply range. The MCU can reach as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Its Cortex-M3 implementation includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for events occurring while the CPU is asleep.

The Cortex-M3 core is a 32-bit RISC processor capable of delivering as much as 1.25 Dhrystone MIPS/MHz. Integrated energy-management peripherals let the device retain peripheral operation in low-energy states, reducing software overhead for short wake-up cycles. The 32-pin QFN package also supports compact PCB layouts while providing the analog and mixed-signal resources expected from a Tiny Gecko-series embedded controller.

Typical uses include battery-powered sensor nodes, compact industrial monitors, low-power IoT endpoints, energy-harvesting equipment, and portable measurement products. The 16 KB Flash capacity suits compact control firmware, while the integrated operational amplifiers and AES capability can simplify analog measurement and secure data handling without requiring separate components in every design.

PCB design should preserve access to all 32 package pins and provide appropriate decoupling near the supply terminals. Confirm the exact pin assignments and exposed-pad requirements in the manufacturer datasheet before routing a new board. Software development should use the EFM32 device header, startup files, linker configuration, and programming tooling matching this specific MCU and Flash density.

This product overview combines the core EFM32TG210 specifications, documented replacement status, package details, and engineering selection considerations. It also distinguishes direct same-package options from functionally similar devices that require firmware, memory, or peripheral validation before substitution.

Drop-in alternatifler için EFM32TG210F16-QFN32T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller EFM32TG210F16-QFN32T (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, RAM, Digital I/O Pins, Product Type.

Silicon Labs
Package: 32-QFN, 6 x 6 mm, exposed pad
RAM: 8 kB
Digital I/O Pins: 24
İle Karşılaştır EFM32TG210F16-QFN32T →
Silicon Labs
Flash Memory: 32 kB
Package: 32-QFN, 6 x 6 mm
Digital I/O Pins: 24 pins
İle Karşılaştır EFM32TG210F16-QFN32T →
Silicon Labs
Flash Memory: 8 kB
Package: 32-QFN, 6 x 6 mm
RAM: 2 kB
İle Karşılaştır EFM32TG210F16-QFN32T →

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

EFM32TG210F16-QFN32T Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit ARM Cortex-M3 microcontroller
Product Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB
RAM 4 KB
Core Architecture ARM Cortex-M3 32-bit RISC
Core Performance Up to 1.25 Dhrystone MIPS/MHz
İşletim Besleme Gerilimi 1.85 V to 3.8 V
Nominal Supply Options 2.5 V or 3.3 V
Run Mode Current 150 µA/MHz
Stop Mode Current As low as 0.6 µA
Memory Protection Unit Up to 8 memory segments
Wake-up Support Wake-up Interrupt Controller
Cryptographic Hardware AES
Operational Amplifier Count 3
Paket 32-pin QFN, 6 x 6 mm
Montaj Türü Surface mount

EFM32TG210F16-QFN32T 32-pin qfn, 6 x 6 mm Pin Yapısı Kılavuzu

EFM32TG210F16-QFN32T (32-pin qfn, 6 x 6 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

32-pin qfn, 6 x 6 mm paket pin çizelgesi için EFM32TG210F16-QFN32T

Ayrıntılı pin çıkış verisi mevcut değil: EFM32TG210F16-QFN32T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

EFM32TG210F16-QFN32T için uygundur 6 uygulamas: Battery-Powered Sensor Nodes, Compact Industrial Monitoring, Portable Medical Sensors, Low-Power IoT Endpoints, Smart Home and Security Sensors, Energy-Harvesting Equipment.

🧩

Battery-Powered Sensor Nodes

EFM32TG210F16-QFN32T fits compact wireless or wired sensor nodes where battery life is determined by both Run-mode efficiency and sleep leakage. Its 32 MHz Cortex-M3 core provides processing headroom for local filtering, configuration, and protocol handling, while Stop mode can fall to 0.6 µA. The Wake-up Interrupt Controller lets the MCU respond to sensor, timer, or communication events without continuous polling. Sixteen kilobytes of Flash supports a compact control image, and four kilobytes of RAM can hold short measurement and communication buffers. The 32-QFN 6 x 6 mm footprint also preserves board area for the radio, sensor, and power-management sections.

🏭

Compact Industrial Monitoring

EFM32TG210F16-QFN32T is appropriate for industrial monitoring modules that combine sensor conditioning, local logic, and a communications interface in a small enclosure. Its three integrated operational amplifiers can support analog signal conditioning without consuming additional board area, while the Cortex-M3 core can execute filtering and supervisory logic. The 1.85 V to 3.8 V operating range allows use with low-energy 3.3 V industrial rails and compatible lower-voltage power systems. Fast event response and autonomous peripheral operation improve responsiveness, while the 32-pin QFN package supports compact controller layouts. Firmware size must remain within the 16 KB Flash budget, and unused analog and digital pins should be configured according to the datasheet.

💊

Portable Medical Sensors

EFM32TG210F16-QFN32T can serve as the control and signal-conditioning MCU in compact medical sensing equipment where low standby current and local processing are important. The three operational amplifiers assist with front-end amplification and filtering, while the Cortex-M3 processor handles sensor control, calibration data, and a lightweight user interface. AES hardware provides a dedicated path for supported cryptographic operations, and the 4 KB RAM supports temporary acquisition data. Stop-mode current of 0.6 µA helps limit energy use between measurements, provided the design uses the appropriate sleep architecture and avoids unnecessary always-on peripherals. Medical-system qualification remains application-specific and should not be inferred from the MCU component alone.

🌐

Low-Power IoT Endpoints

EFM32TG210F16-QFN32T suits IoT endpoints that periodically sample an input, perform short local processing, and communicate through an external radio. Its 32 MHz Cortex-M3 performance supports responsive control logic without requiring a higher-power processor, while the autonomous peripherals and wake-up interrupt system help minimize software overhead. At 150 µA/MHz in Run mode and as little as 0.6 µA in Stop mode, the device can support duty-cycled operation. The AES accelerator can assist compatible secure-data workloads. Board design should keep the radio and high-current peripherals switched away from the MCU rail when the target is battery powered, because the processor current alone does not determine total system consumption.

🔧

Smart Home and Security Sensors

EFM32TG210F16-QFN32T works for smart-home and security sensor modules that need dependable event handling, modest local logic, and low standby consumption. The Cortex-M3 core can manage debouncing, configuration, diagnostics, and communication framing, while the three operational amplifiers can condition analog sensor outputs. AES hardware supports selected encryption functions without loading every cryptographic operation onto the CPU. Its compact 32-QFN 6 x 6 mm package leaves room for sensing and radio components in space-constrained devices. In a security installation, use the device's reset and wake behavior deliberately, protect debug access in the production design, and validate that the firmware update mechanism remains within the 16 KB Flash and 4 KB RAM constraints.

⚡

Energy-Harvesting Equipment

EFM32TG210F16-QFN32T is suitable for energy-limited instruments in which the controller must operate intermittently from a small harvested-energy source. Stop-mode current of 0.6 µA helps preserve energy when the device is inactive, while the short wake-up behavior and wake-up interrupt controller support event-driven measurement cycles. The 32 MHz Cortex-M3 core can complete sensor conditioning and control tasks rapidly, reducing the portion of each cycle during which higher-power circuitry must remain active. Three integrated operational amplifiers can reduce the component count for analog front ends. Designers should calculate the average energy budget using the actual radio, sensor, regulator, and peripheral loads because the MCU's low-power figures do not represent the consumption of the complete energy-harvesting system.

Where to buy EFM32TG210F16-QFN32T online?
Use the Request a Quote form on this page to request EFM32TG210F16-QFN32T availability, current pricing, and a quotation for the required quantity. The manufacturer product is a 32 MHz ARM Cortex-M3 microcontroller with 16 KB Flash in a 32-pin QFN package, so the request should identify the exact EFM32TG210F16-QFN32T order code and desired packaging.
What is the price of EFM32TG210F16-QFN32T?
Request current EFM32TG210F16-QFN32T pricing through the Request a Quote form on this page. No fixed price figure is published here because quotations can vary with quantity, availability, and requested delivery terms. The exact MCU is a Silicon Labs Tiny Gecko device with 32 MHz Cortex-M3 performance, 16 KB Flash, 4 KB RAM, and a 32-QFN 6 x 6 mm package.
What is the lead time for EFM32TG210F16-QFN32T?
The current lead time for EFM32TG210F16-QFN32T should be requested through the Request a Quote form on this page. Lead time depends on the requested quantity and current manufacturer inventory status. Because this EFM32TG part has a manufacturer replacement notice, purchasing teams should also request the current recommended replacement order code before committing the design.
Is EFM32TG210F16-QFN32T in stock?
Check present stock by submitting the exact MPN through the Request a Quote form on this page. The EFM32TG210F16-QFN32T is identified by Silicon Labs as a 32 MHz Cortex-M3 MCU with 16 KB Flash and 4 KB RAM in a 32-pin QFN package. Its lifecycle is no longer active, so the quote response should confirm both availability and the recommended migration path.
What are the key specifications of EFM32TG210F16-QFN32T that engineers should know?
The EFM32TG210F16-QFN32T combines a 32 MHz ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, AES hardware, three operational amplifiers, and a 32-pin QFN 6 x 6 mm package. According to the manufacturer datasheet, it operates from 1.85 V to 3.8 V, consumes as little as 0.6 µA in Stop mode, and supports a Memory Protection Unit with up to eight memory segments.
EFM32TG210F16-QFN32T vs EFM32TG210F32-QFN32T - which is better for a compact design?
EFM32TG210F16-QFN32T is preferable when 16 KB of Flash is sufficient because it matches the compact 32-QFN footprint while reducing Flash capacity by 16 KB relative to the F32 version. The F32 device offers twice the Flash, which is useful for larger firmware, but the higher memory density must be justified by the application. Both belong to the 32 MHz EFM32TG210 Tiny Gecko family.
When should I choose EFM32TG210F16-QFN32T over EFM32TG210F8-QFN32T?
Choose EFM32TG210F16-QFN32T when the firmware requires more than the 8 KB Flash provided by EFM32TG210F8-QFN32T. The F16 version doubles the Flash capacity to 16 KB while retaining the same 32 MHz EFM32TG210 family architecture and 32-QFN 6 x 6 mm format. Its 4 KB RAM makes it more practical for buffering protocol data or supporting a larger embedded application.
Is EFM32TG210F16-QFN32T suitable for battery-powered sensor applications?
Yes, EFM32TG210F16-QFN32T is well suited to battery-powered sensing because its Stop-mode consumption can be as low as 0.6 µA and its Run-mode consumption is listed as 150 µA/MHz. The 32 MHz Cortex-M3 core also provides ample processing capability, while autonomous peripheral operation and the Wake-up Interrupt Controller support event-driven designs that avoid continuous polling.
What can replace EFM32TG210F16-QFN32T?
A valid replacement must preserve the 32-QFN footprint, 1.85 V to 3.8 V supply compatibility, peripheral assignments, and required firmware behavior. Silicon Labs issued an EFM32TG Series 0 revision and datasheet notice identifying a manufacturer drop-in replacement for affected devices. Use the manufacturer product-identification section and the Request a Quote form to obtain the recommended order code for your exact revision.
Can EFM32TG210F16-D-QFN32R replace EFM32TG210F16-QFN32T?
EFM32TG210F16-D-QFN32R is a closely related 32-QFN option with the same 16 KB Flash and 32 MHz Cortex-M3 architecture, but its suffix identifies a different orderable configuration. It should be treated as a migration candidate rather than assumed equivalent without checking the manufacturer ordering information, pin configuration, temperature grade, and packing details for the specific device revision.
Where to download the EFM32TG210F16-QFN32T datasheet PDF?
Download the EFM32TG210 datasheet covering the F32, F16, and F8 devices from the linked manufacturer datasheet PDF. The document describes the 32 MHz ARM Cortex-M3 core, 16 KB Flash configuration, low-power operating modes, memory protection, and package information. For revision-specific errata and the recommended drop-in replacement, also consult Silicon Labs' EFM32TG Series 0 product-change notice.
Where to find the EFM32TG210F16-QFN32T pinout?
Use the pin assignments and package drawing in the EFM32TG210 F32/F16/F8 manufacturer datasheet. The device uses a 32-pin QFN package measuring 6 x 6 mm, so a complete layout must account for all terminals and the exposed thermal pad. Verify the exact pin names, power requirements, ground connections, and exposed-pad connection directly in the package drawing before fabrication.
What development tools are compatible with EFM32TG210F16-QFN32T?
Use ARM-compatible embedded software tools together with the startup code, device header, linker configuration, and flash-programming support created for the EFM32TG210F16 device. The MCU uses an ARM Cortex-M3 core, so standard Cortex-M debugging workflows apply, including SWD programming and debugging. Silicon Labs' device-specific support package is recommended to avoid incorrect peripheral definitions or memory-map assumptions.
Does EFM32TG210F16-QFN32T support low-power operation and hardware AES?
Yes, EFM32TG210F16-QFN32T combines Stop-mode operation as low as 0.6 µA with dedicated AES hardware. The AES accelerator can reduce processor workload for supported cryptographic operations, while Stop mode limits active consumption when the design can wake on an external event. The Cortex-M3 Wake-up Interrupt Controller allows interrupts initiated while the CPU sleeps.
Is EFM32TG210F16-QFN32T RoHS compliant?
The RoHS status must be confirmed from the current Silicon Labs product declaration for the exact order code before treating the component as compliant. The device is a 32-pin QFN EFM32TG210 Cortex-M3 MCU, but environmental declarations can differ by revision, date code, and customer qualification record. Request the applicable material and compliance documents with the quotation through the Request a Quote form.

Mühendislik referans verileri: EFM32TG210F16-QFN32T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose EFM32TG210F16-QFN32T for a compact, low-power design that needs a 32 MHz Cortex-M3, 16 KB Flash, 4 KB RAM, AES hardware, and three integrated operational amplifiers in a 32-QFN 6 x 6 mm package. It is especially suitable for battery-operated sensors, IoT endpoints, and compact monitoring modules where firmware fits within 16 KB and Stop-mode efficiency matters. EFM32TG210F8-QFN32T is appropriate when only 8 KB of Flash is needed, while EFM32TG210F32-QFN32 is preferable when application size exceeds the F16 budget. For an existing EFM32TG210F16-QFN32T design, verify the manufacturer's product-identification notice and use the identified drop-in replacement rather than assuming any same-package EFM32 device is interchangeable. Firmware, peripheral, pin, temperature-grade, and exposed-pad differences must be checked before substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Package 32-QFN (6 x 6 mm)
Brand Silicon Labs
CPU Core ARM Cortex-M3
Maximum Frequency 32 MHz
Flash Memory 16 KB
RAM 4 KB
Supply Voltage Range 1.85 V to 3.8 V
Stop Mode Current As low as 0.6 µA
Run Mode Current 150 µA/MHz
Cryptographic Support AES hardware
Operational Amplifiers 3

Ana Farklılayıcılar

  • Doubles the Flash capacity of the F8 member in the same 32-QFN family footprint (karşılaştırma:EFM32TG210F8-QFN32T)
  • Offers twice the Flash of the F16 option for larger firmware (karşılaştırma:EFM32TG210F32-QFN32)
  • Combines low-power operation with integrated analog resources (karşılaştırma:EFM32TG110F8-D-QFN24R)

Tasarım Notları

Use the exact 32-QFN land pattern and exposed-pad connection specified in the EFM32TG210 package drawing. Place all required decoupling capacitors close to their designated supply and ground pins, keep sensitive analog inputs away from fast-switching digital routes, and provide a continuous ground reference beneath the exposed pad. Verify the PCB library against the manufacturer mechanical drawing before fabrication.

Calculate the average current from the actual duty cycle rather than applying the 150 µA/MHz Run figure to the full operating period. Include MCU Run time, Stop time, sensor activity, radio transmission, regulator losses, and peripheral leakage. Estimated example: at 32 MHz, the listed 150 µA/MHz figure corresponds to approximately 4.8 mA while the core is running continuously, before external loads are added.

Route analog inputs associated with the three operational amplifiers away from digital clocks, debug signals, and switching-regulator nodes. Provide a quiet ground reference, use short input traces, and follow the datasheet's bias and decoupling recommendations. If the measured sensor signal is small, evaluate input-referred noise and leakage experimentally rather than inferring signal-chain performance from the MCU's supply specification alone.

Do not assume that every 32-pin EFM32 or EFM32G device is firmware-compatible. Verify Flash size, RAM size, package dimensions, exposed-pad requirements, pin multiplexing, and peripheral availability against the manufacturer ordering information. The EFM32TG Series 0 revision notice specifically concerns affected devices and provides a drop-in replacement identification; use that notice when selecting an exact replacement.

Use the device-specific EFM32TG firmware, startup files, linker scripts, and flash-loading configuration for the 16 KB F16 device. A debugger connection that works for a related density does not prove that the application image is correct. Confirm the vector table, memory boundaries, boot behavior, reset pins, and peripheral clock initialization after migration.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No current manufacturer declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance were identified for this exact order code. Request the applicable Silicon Labs declarations with the quotation.

İlgili Aramalar

EFM32TG210F16-QFN32T datasheet EFM32TG210F16-QFN32T pinout EFM32TG210F16-QFN32T datasheet pdf EFM32TG210F16-QFN32T footprint EFM32TG210F16-QFN32T replacement EFM32TG210F16-QFN32T equivalent EFM32TG210F16-QFN32T price EFM32TG210F16-QFN32T stock Silicon Labs EFM32TG210F16-QFN32T EFM32TG210F16-QFN32T vs EFM32TG210F8-QFN32T EFM32TG210F16-QFN32T vs EFM32TG210F32-QFN32 EFM32TG210 32 MHz microcontroller EFM32TG210 QFN32 application circuit 32 QFN Cortex-M3 low power MCU

İlgili Bileşenler ve Terimler

Silicon Labs EFM32TG210F16-QFN32T EFM32TG210F8-QFN32T EFM32TG210F32-QFN32 EFM32TG210F16-D-QFN32R EFM32TG110F8-D-QFN24R EFM32TG108F8-D-QFN24R ARM Cortex-M3 32-bit RISC processor Tiny Gecko microcontroller embedded microcontroller semiconductor Wake-up Interrupt Controller Memory Protection Unit Stop mode Run mode AES hardware operational amplifier 16 KB Flash 4 KB RAM 32 MHz 32-QFN QFN package family surface-mount device battery-powered sensor node
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle