EFM32TG210F16-QFN32T - 32MHz Cortex-M3 16KB MCU | Silicon Labs
부품 번호: EFM32TG210F16-QFN32T ✗ 단종EFM32TG210F16-QFN32T 개요
An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing performance while minimizing energy consumption during active and idle operation. The EFM32 Tiny Gecko family combines an ARM Cortex-M3 CPU with autonomous peripherals and dedicated low-power hardware. This allows a system to monitor or control external activity while the processor sleeps, reducing the time and energy required for wake-up and repeated polling.
Key characteristics include a 32 MHz maximum operating frequency, 16 KB Flash, 4 KB RAM, AES hardware support, three operational amplifiers, and a 1.85 V to 3.8 V supply range. The MCU can reach as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Its Cortex-M3 implementation includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for events occurring while the CPU is asleep.
The Cortex-M3 core is a 32-bit RISC processor capable of delivering as much as 1.25 Dhrystone MIPS/MHz. Integrated energy-management peripherals let the device retain peripheral operation in low-energy states, reducing software overhead for short wake-up cycles. The 32-pin QFN package also supports compact PCB layouts while providing the analog and mixed-signal resources expected from a Tiny Gecko-series embedded controller.
Typical uses include battery-powered sensor nodes, compact industrial monitors, low-power IoT endpoints, energy-harvesting equipment, and portable measurement products. The 16 KB Flash capacity suits compact control firmware, while the integrated operational amplifiers and AES capability can simplify analog measurement and secure data handling without requiring separate components in every design.
PCB design should preserve access to all 32 package pins and provide appropriate decoupling near the supply terminals. Confirm the exact pin assignments and exposed-pad requirements in the manufacturer datasheet before routing a new board. Software development should use the EFM32 device header, startup files, linker configuration, and programming tooling matching this specific MCU and Flash density.
This product overview combines the core EFM32TG210 specifications, documented replacement status, package details, and engineering selection considerations. It also distinguishes direct same-package options from functionally similar devices that require firmware, memory, or peripheral validation before substitution.
드롭인 대체품: EFM32TG210F16-QFN32T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EFM32TG210F16-QFN32T (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, RAM, Digital I/O Pins, Product Type.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청EFM32TG210F16-QFN32T 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| RAM | 4 KB |
| Core Architecture | ARM Cortex-M3 32-bit RISC |
| Core Performance | Up to 1.25 Dhrystone MIPS/MHz |
| 동작 공급 전압 | 1.85 V to 3.8 V |
| Nominal Supply Options | 2.5 V or 3.3 V |
| Run Mode Current | 150 µA/MHz |
| Stop Mode Current | As low as 0.6 µA |
| Memory Protection Unit | Up to 8 memory segments |
| Wake-up Support | Wake-up Interrupt Controller |
| Cryptographic Hardware | AES |
| Operational Amplifier Count | 3 |
| 패키지 | 32-pin QFN, 6 x 6 mm |
| 실장 유형 | Surface mount |
EFM32TG210F16-QFN32T 32-pin qfn, 6 x 6 mm 핀 구성 가이드
EFM32TG210F16-QFN32T(32-pin qfn, 6 x 6 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EFM32TG210F16-QFN32T.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EFM32TG210F16-QFN32T 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Nodes, Compact Industrial Monitoring, Portable Medical Sensors, Low-Power IoT Endpoints, Smart Home and Security Sensors, Energy-Harvesting Equipment.
Battery-Powered Sensor Nodes
EFM32TG210F16-QFN32T fits compact wireless or wired sensor nodes where battery life is determined by both Run-mode efficiency and sleep leakage. Its 32 MHz Cortex-M3 core provides processing headroom for local filtering, configuration, and protocol handling, while Stop mode can fall to 0.6 µA. The Wake-up Interrupt Controller lets the MCU respond to sensor, timer, or communication events without continuous polling. Sixteen kilobytes of Flash supports a compact control image, and four kilobytes of RAM can hold short measurement and communication buffers. The 32-QFN 6 x 6 mm footprint also preserves board area for the radio, sensor, and power-management sections.
추천
Compact Industrial Monitoring
EFM32TG210F16-QFN32T is appropriate for industrial monitoring modules that combine sensor conditioning, local logic, and a communications interface in a small enclosure. Its three integrated operational amplifiers can support analog signal conditioning without consuming additional board area, while the Cortex-M3 core can execute filtering and supervisory logic. The 1.85 V to 3.8 V operating range allows use with low-energy 3.3 V industrial rails and compatible lower-voltage power systems. Fast event response and autonomous peripheral operation improve responsiveness, while the 32-pin QFN package supports compact controller layouts. Firmware size must remain within the 16 KB Flash budget, and unused analog and digital pins should be configured according to the datasheet.
추천
Portable Medical Sensors
EFM32TG210F16-QFN32T can serve as the control and signal-conditioning MCU in compact medical sensing equipment where low standby current and local processing are important. The three operational amplifiers assist with front-end amplification and filtering, while the Cortex-M3 processor handles sensor control, calibration data, and a lightweight user interface. AES hardware provides a dedicated path for supported cryptographic operations, and the 4 KB RAM supports temporary acquisition data. Stop-mode current of 0.6 µA helps limit energy use between measurements, provided the design uses the appropriate sleep architecture and avoids unnecessary always-on peripherals. Medical-system qualification remains application-specific and should not be inferred from the MCU component alone.
추천
Low-Power IoT Endpoints
EFM32TG210F16-QFN32T suits IoT endpoints that periodically sample an input, perform short local processing, and communicate through an external radio. Its 32 MHz Cortex-M3 performance supports responsive control logic without requiring a higher-power processor, while the autonomous peripherals and wake-up interrupt system help minimize software overhead. At 150 µA/MHz in Run mode and as little as 0.6 µA in Stop mode, the device can support duty-cycled operation. The AES accelerator can assist compatible secure-data workloads. Board design should keep the radio and high-current peripherals switched away from the MCU rail when the target is battery powered, because the processor current alone does not determine total system consumption.
추천
Smart Home and Security Sensors
EFM32TG210F16-QFN32T works for smart-home and security sensor modules that need dependable event handling, modest local logic, and low standby consumption. The Cortex-M3 core can manage debouncing, configuration, diagnostics, and communication framing, while the three operational amplifiers can condition analog sensor outputs. AES hardware supports selected encryption functions without loading every cryptographic operation onto the CPU. Its compact 32-QFN 6 x 6 mm package leaves room for sensing and radio components in space-constrained devices. In a security installation, use the device's reset and wake behavior deliberately, protect debug access in the production design, and validate that the firmware update mechanism remains within the 16 KB Flash and 4 KB RAM constraints.
추천
Energy-Harvesting Equipment
EFM32TG210F16-QFN32T is suitable for energy-limited instruments in which the controller must operate intermittently from a small harvested-energy source. Stop-mode current of 0.6 µA helps preserve energy when the device is inactive, while the short wake-up behavior and wake-up interrupt controller support event-driven measurement cycles. The 32 MHz Cortex-M3 core can complete sensor conditioning and control tasks rapidly, reducing the portion of each cycle during which higher-power circuitry must remain active. Three integrated operational amplifiers can reduce the component count for analog front ends. Designers should calculate the average energy budget using the actual radio, sensor, regulator, and peripheral loads because the MCU's low-power figures do not represent the consumption of the complete energy-harvesting system.
추천
추천 제품 요약
엔지니어링 참조 데이터: EFM32TG210F16-QFN32T — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 32-QFN (6 x 6 mm) |
| Brand | Silicon Labs |
| CPU Core | ARM Cortex-M3 |
| Maximum Frequency | 32 MHz |
| Flash Memory | 16 KB |
| RAM | 4 KB |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Stop Mode Current | As low as 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Cryptographic Support | AES hardware |
| Operational Amplifiers | 3 |
주요 차별점
- Doubles the Flash capacity of the F8 member in the same 32-QFN family footprint (vs EFM32TG210F8-QFN32T)
- Offers twice the Flash of the F16 option for larger firmware (vs EFM32TG210F32-QFN32)
- Combines low-power operation with integrated analog resources (vs EFM32TG110F8-D-QFN24R)
설계 노트
Use the exact 32-QFN land pattern and exposed-pad connection specified in the EFM32TG210 package drawing. Place all required decoupling capacitors close to their designated supply and ground pins, keep sensitive analog inputs away from fast-switching digital routes, and provide a continuous ground reference beneath the exposed pad. Verify the PCB library against the manufacturer mechanical drawing before fabrication.
Calculate the average current from the actual duty cycle rather than applying the 150 µA/MHz Run figure to the full operating period. Include MCU Run time, Stop time, sensor activity, radio transmission, regulator losses, and peripheral leakage. Estimated example: at 32 MHz, the listed 150 µA/MHz figure corresponds to approximately 4.8 mA while the core is running continuously, before external loads are added.
Route analog inputs associated with the three operational amplifiers away from digital clocks, debug signals, and switching-regulator nodes. Provide a quiet ground reference, use short input traces, and follow the datasheet's bias and decoupling recommendations. If the measured sensor signal is small, evaluate input-referred noise and leakage experimentally rather than inferring signal-chain performance from the MCU's supply specification alone.
Do not assume that every 32-pin EFM32 or EFM32G device is firmware-compatible. Verify Flash size, RAM size, package dimensions, exposed-pad requirements, pin multiplexing, and peripheral availability against the manufacturer ordering information. The EFM32TG Series 0 revision notice specifically concerns affected devices and provides a drop-in replacement identification; use that notice when selecting an exact replacement.
Use the device-specific EFM32TG firmware, startup files, linker scripts, and flash-loading configuration for the 16 KB F16 device. A debugger connection that works for a related density does not prove that the application image is correct. Confirm the vector table, memory boundaries, boot behavior, reset pins, and peripheral clock initialization after migration.
규정 준수 정보
No current manufacturer declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance were identified for this exact order code. Request the applicable Silicon Labs declarations with the quotation.