EFM32TG210F16-QFN32T - 32MHz Cortex-M3 16KB MCU | Silicon Labs
MPN: EFM32TG210F16-QFN32T ✗ Cuối đờiEFM32TG210F16-QFN32T Tóm tắt
An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing performance while minimizing energy consumption during active and idle operation. The EFM32 Tiny Gecko family combines an ARM Cortex-M3 CPU with autonomous peripherals and dedicated low-power hardware. This allows a system to monitor or control external activity while the processor sleeps, reducing the time and energy required for wake-up and repeated polling.
Key characteristics include a 32 MHz maximum operating frequency, 16 KB Flash, 4 KB RAM, AES hardware support, three operational amplifiers, and a 1.85 V to 3.8 V supply range. The MCU can reach as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Its Cortex-M3 implementation includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for events occurring while the CPU is asleep.
The Cortex-M3 core is a 32-bit RISC processor capable of delivering as much as 1.25 Dhrystone MIPS/MHz. Integrated energy-management peripherals let the device retain peripheral operation in low-energy states, reducing software overhead for short wake-up cycles. The 32-pin QFN package also supports compact PCB layouts while providing the analog and mixed-signal resources expected from a Tiny Gecko-series embedded controller.
Typical uses include battery-powered sensor nodes, compact industrial monitors, low-power IoT endpoints, energy-harvesting equipment, and portable measurement products. The 16 KB Flash capacity suits compact control firmware, while the integrated operational amplifiers and AES capability can simplify analog measurement and secure data handling without requiring separate components in every design.
PCB design should preserve access to all 32 package pins and provide appropriate decoupling near the supply terminals. Confirm the exact pin assignments and exposed-pad requirements in the manufacturer datasheet before routing a new board. Software development should use the EFM32 device header, startup files, linker configuration, and programming tooling matching this specific MCU and Flash density.
This product overview combines the core EFM32TG210 specifications, documented replacement status, package details, and engineering selection considerations. It also distinguishes direct same-package options from functionally similar devices that require firmware, memory, or peripheral validation before substitution.
Bộ thay thế dễ dàng lắp đặt cho EFM32TG210F16-QFN32T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EFM32TG210F16-QFN32T (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package, RAM, Digital I/O Pins, Product Type.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếEFM32TG210F16-QFN32T Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| RAM | 4 KB |
| Core Architecture | ARM Cortex-M3 32-bit RISC |
| Core Performance | Up to 1.25 Dhrystone MIPS/MHz |
| Điện áp cung cấp hoạt động | 1.85 V to 3.8 V |
| Nominal Supply Options | 2.5 V or 3.3 V |
| Run Mode Current | 150 µA/MHz |
| Stop Mode Current | As low as 0.6 µA |
| Memory Protection Unit | Up to 8 memory segments |
| Wake-up Support | Wake-up Interrupt Controller |
| Cryptographic Hardware | AES |
| Operational Amplifier Count | 3 |
| Hộp | 32-pin QFN, 6 x 6 mm |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân EFM32TG210F16-QFN32T 32-pin qfn, 6 x 6 mm
Cấu hình chân cho EFM32TG210F16-QFN32T (32-pin qfn, 6 x 6 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EFM32TG210F16-QFN32T.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EFM32TG210F16-QFN32T phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Nodes, Compact Industrial Monitoring, Portable Medical Sensors, Low-Power IoT Endpoints, Smart Home and Security Sensors, Energy-Harvesting Equipment.
Battery-Powered Sensor Nodes
EFM32TG210F16-QFN32T fits compact wireless or wired sensor nodes where battery life is determined by both Run-mode efficiency and sleep leakage. Its 32 MHz Cortex-M3 core provides processing headroom for local filtering, configuration, and protocol handling, while Stop mode can fall to 0.6 µA. The Wake-up Interrupt Controller lets the MCU respond to sensor, timer, or communication events without continuous polling. Sixteen kilobytes of Flash supports a compact control image, and four kilobytes of RAM can hold short measurement and communication buffers. The 32-QFN 6 x 6 mm footprint also preserves board area for the radio, sensor, and power-management sections.
Được đề xuất
Compact Industrial Monitoring
EFM32TG210F16-QFN32T is appropriate for industrial monitoring modules that combine sensor conditioning, local logic, and a communications interface in a small enclosure. Its three integrated operational amplifiers can support analog signal conditioning without consuming additional board area, while the Cortex-M3 core can execute filtering and supervisory logic. The 1.85 V to 3.8 V operating range allows use with low-energy 3.3 V industrial rails and compatible lower-voltage power systems. Fast event response and autonomous peripheral operation improve responsiveness, while the 32-pin QFN package supports compact controller layouts. Firmware size must remain within the 16 KB Flash budget, and unused analog and digital pins should be configured according to the datasheet.
Được đề xuất
Portable Medical Sensors
EFM32TG210F16-QFN32T can serve as the control and signal-conditioning MCU in compact medical sensing equipment where low standby current and local processing are important. The three operational amplifiers assist with front-end amplification and filtering, while the Cortex-M3 processor handles sensor control, calibration data, and a lightweight user interface. AES hardware provides a dedicated path for supported cryptographic operations, and the 4 KB RAM supports temporary acquisition data. Stop-mode current of 0.6 µA helps limit energy use between measurements, provided the design uses the appropriate sleep architecture and avoids unnecessary always-on peripherals. Medical-system qualification remains application-specific and should not be inferred from the MCU component alone.
Được đề xuất
Low-Power IoT Endpoints
EFM32TG210F16-QFN32T suits IoT endpoints that periodically sample an input, perform short local processing, and communicate through an external radio. Its 32 MHz Cortex-M3 performance supports responsive control logic without requiring a higher-power processor, while the autonomous peripherals and wake-up interrupt system help minimize software overhead. At 150 µA/MHz in Run mode and as little as 0.6 µA in Stop mode, the device can support duty-cycled operation. The AES accelerator can assist compatible secure-data workloads. Board design should keep the radio and high-current peripherals switched away from the MCU rail when the target is battery powered, because the processor current alone does not determine total system consumption.
Được đề xuất
Smart Home and Security Sensors
EFM32TG210F16-QFN32T works for smart-home and security sensor modules that need dependable event handling, modest local logic, and low standby consumption. The Cortex-M3 core can manage debouncing, configuration, diagnostics, and communication framing, while the three operational amplifiers can condition analog sensor outputs. AES hardware supports selected encryption functions without loading every cryptographic operation onto the CPU. Its compact 32-QFN 6 x 6 mm package leaves room for sensing and radio components in space-constrained devices. In a security installation, use the device's reset and wake behavior deliberately, protect debug access in the production design, and validate that the firmware update mechanism remains within the 16 KB Flash and 4 KB RAM constraints.
Được đề xuất
Energy-Harvesting Equipment
EFM32TG210F16-QFN32T is suitable for energy-limited instruments in which the controller must operate intermittently from a small harvested-energy source. Stop-mode current of 0.6 µA helps preserve energy when the device is inactive, while the short wake-up behavior and wake-up interrupt controller support event-driven measurement cycles. The 32 MHz Cortex-M3 core can complete sensor conditioning and control tasks rapidly, reducing the portion of each cycle during which higher-power circuitry must remain active. Three integrated operational amplifiers can reduce the component count for analog front ends. Designers should calculate the average energy budget using the actual radio, sensor, regulator, and peripheral loads because the MCU's low-power figures do not represent the consumption of the complete energy-harvesting system.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EFM32TG210F16-QFN32T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 32-QFN (6 x 6 mm) |
| Brand | Silicon Labs |
| CPU Core | ARM Cortex-M3 |
| Maximum Frequency | 32 MHz |
| Flash Memory | 16 KB |
| RAM | 4 KB |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Stop Mode Current | As low as 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Cryptographic Support | AES hardware |
| Operational Amplifiers | 3 |
Bảo phân biệt quan trọng
- Doubles the Flash capacity of the F8 member in the same 32-QFN family footprint (vsEFM32TG210F8-QFN32T)
- Offers twice the Flash of the F16 option for larger firmware (vsEFM32TG210F32-QFN32)
- Combines low-power operation with integrated analog resources (vsEFM32TG110F8-D-QFN24R)
Ghi chú thiết kế
Use the exact 32-QFN land pattern and exposed-pad connection specified in the EFM32TG210 package drawing. Place all required decoupling capacitors close to their designated supply and ground pins, keep sensitive analog inputs away from fast-switching digital routes, and provide a continuous ground reference beneath the exposed pad. Verify the PCB library against the manufacturer mechanical drawing before fabrication.
Calculate the average current from the actual duty cycle rather than applying the 150 µA/MHz Run figure to the full operating period. Include MCU Run time, Stop time, sensor activity, radio transmission, regulator losses, and peripheral leakage. Estimated example: at 32 MHz, the listed 150 µA/MHz figure corresponds to approximately 4.8 mA while the core is running continuously, before external loads are added.
Route analog inputs associated with the three operational amplifiers away from digital clocks, debug signals, and switching-regulator nodes. Provide a quiet ground reference, use short input traces, and follow the datasheet's bias and decoupling recommendations. If the measured sensor signal is small, evaluate input-referred noise and leakage experimentally rather than inferring signal-chain performance from the MCU's supply specification alone.
Do not assume that every 32-pin EFM32 or EFM32G device is firmware-compatible. Verify Flash size, RAM size, package dimensions, exposed-pad requirements, pin multiplexing, and peripheral availability against the manufacturer ordering information. The EFM32TG Series 0 revision notice specifically concerns affected devices and provides a drop-in replacement identification; use that notice when selecting an exact replacement.
Use the device-specific EFM32TG firmware, startup files, linker scripts, and flash-loading configuration for the 16 KB F16 device. A debugger connection that works for a related density does not prove that the application image is correct. Confirm the vector table, memory boundaries, boot behavior, reset pins, and peripheral clock initialization after migration.
Thông tin tuân thủ
No current manufacturer declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance were identified for this exact order code. Request the applicable Silicon Labs declarations with the quotation.