Renesas Electronics

ICS511MIT - 160MHz PLL Clock Multiplier | Renesas | 8-SOIC

MPN: ICS511MIT ✗ Son Kullanım Zamanı
8-SOIC Package 160 MHz Speed
MOQ: 1 |

ICS511MIT Genel Bakış

The Renesas ICS511MIT is a PLL-based clock generator and clock multiplier with a maximum operating frequency of 160 MHz, supplied in an 8-SOIC surface-mount package. It is designed to derive a multiplied clock from an external clock or crystal reference for precision timing systems. The IC is listed as an obsolete product, so designers should confirm availability, lifecycle status, and any last-time-buy terms before starting a new production design.

A PLL clock multiplier belongs to the clock and timing IC family. Unlike a simple logic inverter or buffer, it uses a phase-locked loop to lock an internal or output frequency to a stable reference and multiply that reference by an integer ratio. Clock generators and frequency synthesizers sit within the broader timing-control hierarchy used to coordinate processors, transceivers, memory, and data-conversion equipment.

The primary identified characteristics are a 160 MHz maximum clock frequency, a PLL clock-multiplier function, and an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in body width. The ICS511MIT is also described as a high-frequency clock generator intended for precision applications. Its supported input sources are identified as a clock or crystal, and it belongs to the ICS511 series.

Because the device is obsolete, lifecycle planning is more important than headline performance differences. An existing design can often continue using the same ICS511 family pin arrangement, but a clock source is a board-level dependency: replacement parts must reproduce the reference frequency, output frequency range, output drive, and pin mapping. A nominal maximum frequency alone does not guarantee timing compatibility with an existing circuit.

Typical uses include precision frequency multiplication in communications equipment, clock distribution for high-speed digital subsystems, test and measurement instrumentation, and timing architectures that require a derived clock rather than a free-running oscillator. In such systems, the PLL output replaces or supplements a lower-frequency reference while preserving phase coherence with the reference source.

When laying out a board, route the reference input and clock outputs away from noisy switching nodes and provide a stable ground reference beneath the device. Keep clock traces short, use controlled-impedance routing when operating at high edge rates, and confirm the exact output-divider and feedback configuration against the manufacturer datasheet before releasing a new layout.

This page combines the identified device characteristics, lifecycle information, cross-reference results, and practical clock-tree guidance. It also documents the limitations of an obsolete timing IC so procurement and engineering teams can assess redesign risk rather than relying on a headline frequency rating alone.

Drop-in alternatifler için ICS511MIT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ICS511MIT (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Manufacturer, Series.

Renesas Electronics
Package: 8-SOIC (0.154 inch, 3.90 mm width)
Product Type: Clock Generator IC
Manufacturer: Renesas Electronics Corporation
İle Karşılaştır ICS511MIT →
Renesas Electronics
Package: 8-pin SOIC, 3.90 mm width
Product Type: Single PLL clock generator IC
Series: ICS511 LOCO
İle Karşılaştır ICS511MIT →
Renesas Electronics
Package: 8-SOIC, 0.154 inch, 3.90 mm width
Product Type: Clock Generator IC
İle Karşılaştır ICS511MIT →

ICS511M

✅ Yerleştirme
Renesas Electronics
📦 8-SOIC
Clock Generator IC · LOCO PLL clock multiplier · Yes · 200 MHz · 1 · Clock, Crystal · CMOS · 3.135 V to 5.25 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ICS511MT

✅ Yerleştirme
Renesas Electronics
📦 8-SOIC
Clock Generator IC · Yes · Clock, Crystal · CMOS · 200 MHz · 1 · 1:1 · No

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ICS511MI

✅ Yerleştirme
Renesas Electronics
📦 8-SOIC
Single PLL clock generator IC · 160 MHz · Single PLL · Clock or crystal input · CMOS · 1:1 · 1 · No

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ICS511ML

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-SOIC
Same ICS511-series PLL clock-multiplier family and 8-SOIC footprint; suffix-specific frequency and temperature ratings require datasheet confirmation

📋 Katalogda Olmayan Referans Alternatifi

ICS511MIT Özellikler

Product Type PLL clock multiplier / clock generator IC
Manufacturer Renesas Electronics
Series ICS511
Azami Saat Hızı 160 MHz
Multiplier Output 1
Reference Input Clock or crystal
PLL Yes
Paket 8-SOIC
Package Body Width 0.154 inch (3.90 mm)
Montaj Türü Surface mount
Shipping Format Tape and reel
Product Status Obsolete
Programmability Not verified

ICS511MIT 0.154 inch (3.90 mm) Pin Yapısı Kılavuzu

ICS511MIT (0.154 inch (3.90 mm) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

0.154 inch (3.90 mm) paket pin çizelgesi için ICS511MIT

Ayrıntılı pin çıkış verisi mevcut değil: ICS511MIT.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ICS511MIT için uygundur 6 uygulamas: Precision Communications Clocking, High-Speed Digital Subsystem Clocking, Test and Measurement Instrumentation, Industrial Control and Data Acquisition, Phase-Coherent Clock Distribution, Legacy System Maintenance and Repair.

🌐

Precision Communications Clocking

The ICS511MIT is suitable for a communications subsystem that needs a higher-frequency, phase-coherent clock derived from a lower-frequency reference. Its PLL clock-multiplier architecture and listed 160 MHz maximum frequency make it appropriate for serializer, transceiver, or high-speed digital interface timing. Place the reference source close to the device, keep the feedback and output routes short, and confirm that the required multiplication ratio and output frequency fall within the part-specific limits in the datasheet. Because the ICS511MIT is obsolete, it is most appropriate for maintaining an existing qualified design rather than driving a new platform.

🖥️

High-Speed Digital Subsystem Clocking

Use the ICS511MIT to create a multiplied clock for logic that requires more clock frequency than the board reference can supply directly. The identified 160 MHz capability supports high-speed clock-tree sections in processor, storage, and data-conversion systems, provided the actual output range and output-drive requirements are verified from the manufacturer datasheet. Route the clock as a transmission-line class net if rise time demands it, avoid unnecessary stubs, and keep switching regulators and high-current nets physically separated from the reference and clock outputs.

🔧

Test and Measurement Instrumentation

The ICS511MIT can supply a derived clock for instrumentation requiring a stable reference relationship across multiple internal circuits. Using a PLL multiplier allows a single crystal-derived reference to support other clock domains while maintaining a defined relationship to the source. The design must account for reference purity, output jitter, and the propagation delay through the feedback loop. Validate the maximum frequency and reference-input conditions in the datasheet, and measure the generated clock at the load rather than relying only on an unloaded probe point.

🏭

Industrial Control and Data Acquisition

The ICS511MIT can support industrial control and data-acquisition boards that synchronize sampling, conversion, and processing sections to a common reference. Its listed clock-generator function, PLL capability, and 160 MHz maximum frequency suit systems requiring deterministic timing relationships between modules. Keep analog and power-conversion sections separated from the clock generator, maintain a low-impedance ground return, and verify the operating-temperature grade before using the part in industrial equipment. For new platforms, evaluate the current supported alternative alongside the legacy ICS511 family.

⚡

Phase-Coherent Clock Distribution

Use the ICS511MIT when several logic domains must remain phase-coherent rather than simply receive independent oscillator outputs. A PLL-multiplied clock provides a derived frequency with a defined relationship to its clock or crystal reference, which is useful for parallel data paths, converters, and timing controllers. The reference trace should be short and isolated, while clock outputs should be buffered or routed according to the load capacitance specified by the manufacturer. Scope the waveform at the far end of the board to verify amplitude, edge quality, and absence of reflected pulses.

🔧

Legacy System Maintenance and Repair

The ICS511MIT is most relevant to maintenance, repair, and lifecycle-extension programs for equipment that already uses the ICS511 family. Its 8-SOIC package and identified 160 MHz clock-generator specification support controlled substitution within an existing design, provided the reference-input range, pin mapping, supply requirements, and temperature grade are confirmed. Document any alternate ordering code in the equipment records and perform timing measurements after replacement. New production quantities should be reserved for spares rather than assumed as a guaranteed long-term supply.

What is the ICS511MIT?
The ICS511MIT is a Renesas PLL-based clock generator and clock multiplier that operates up to 160 MHz in an 8-SOIC package. It is intended to derive a multiplied clock from a clock or crystal reference for precision timing systems. Manufacturer listings identify the device as an ICS511-series clock generator with PLL capability, and cross-reference records classify the part as obsolete. Its lifecycle status makes long-term availability an important consideration for new designs.
What is the maximum frequency of the ICS511MIT?
The maximum listed operating frequency of the ICS511MIT is 160 MHz. This rating identifies the device as a high-frequency PLL clock multiplier rather than a low-speed divider or general-purpose timer. When comparing this part with a replacement, verify the maximum output frequency, reference-input range, feedback-divider settings, and output load because the 160 MHz headline rating alone does not establish complete circuit compatibility.
Is the ICS511MIT still active?
No, the ICS511MIT is listed as obsolete. The part remains a documented ICS511-series clock generator with a 160 MHz maximum frequency, but new production demand should not be based on an assumption of ongoing lifecycle support. Contact the manufacturer or a supplier through the Request a Quote form on this page to determine whether any remaining stock can be used for maintenance, repair, or an already-approved design.
Where can I download the ICS511MIT datasheet?
The ICS511MIT datasheet is available through the datasheet link on this page and through the indexed document listing for Integrated Circuit Systems. The document listing identifies the source as an 8-page LOCO PLL clock-multiplier datasheet. Use the pin-description and application sections when assigning PCB tracks and confirming the exact feedback-divider configuration, since those details are essential for an accurate replacement decision.
What package does the ICS511MIT use?
The ICS511MIT uses an 8-SOIC surface-mount package with a stated body width of 0.154 inch, or 3.90 mm. Its suffix identifies the tape-and-reel shipping format rather than a different package family. When substituting a device, use the manufacturer pinout and board footprint together, and verify the land pattern, pin-one orientation, and exposed thermal considerations for the exact replacement.
What can replace the ICS511MIT?
The closest documented replacements are other ICS511-family devices, including ICS511M, ICS511MT, and ICS511MI, because they use the same 8-SOIC clock-generator family and reference-source concept. However, the shipping suffix and temperature-grade details must be checked before any substitution is approved. Use the Request a Quote form on this page to request current availability for the original part and the candidate replacements.
What is the difference between the ICS511MIT and ICS511MT?
The ICS511MIT and ICS511MT are both Renesas ICS511-series, 8-SOIC tape-and-reel clock-generator devices, and published comparison data lists both as obsolete. The distinguishing details are the manufacturer suffix definitions, including temperature grade and any ordering-code differences. Confirm the exact suffix meaning in the manufacturer datasheet and compare operating-temperature limits before treating either device as a direct substitute.
Is ICS511MI the same as ICS511MIT?
The ICS511MI and ICS511MIT are related ICS511-family clock-generator devices, but their shipping codes are not identical. Published comparison data lists the ICS511MI as a tube-packed device and the ICS511MIT as a tape-and-reel device, with both marked obsolete. The electrical and pin compatibility must be confirmed independently, and production handling requirements may make a tube-versus-reel difference operationally significant.
Is the ICS511MIT suitable for communications equipment?
Yes, the ICS511MIT can suit communications equipment that needs a multiplied clock derived from a clock or crystal reference. Its 160 MHz maximum frequency and PLL-based architecture support precise frequency generation for high-speed digital subsystems. The design must still provide a clean reference, appropriate supply rails, and terminated clock routing, while preserving the required phase relationship and jitter performance for the downstream serializer or transceiver.
When should I choose the ICS511MIT instead of an ICS511MT?
Choose the ICS511MIT when the original design specifies the manufacturer ICS511MIT ordering code and its temperature-grade, reference-input, and shipping requirements. Choose the ICS511MT only after confirming that its suffix-specific electrical ratings satisfy the operating environment and that its pinout matches the PCB. Because both devices are documented as obsolete, the decision should prioritize continuity with the qualified BOM rather than new-design availability.
Is there a Renesas equivalent for the ICS511MIT?
The Renesas cross-reference search is the appropriate starting point for an equivalent, while the identified ICS511-family parts provide the closest documented drop-in candidates. Confirm each candidate against the ICS511MIT datasheet for pin mapping, supply voltage, reference frequency, multiplication ratio, output waveform, and temperature range. A matching package and clock-generator label are not sufficient by themselves to establish a production-equivalent replacement.
How should I design the PCB layout around the ICS511MIT?
Place the ICS511MIT close to the clock source and keep the reference and output routes short and isolated from switching-power paths. Route outputs as controlled-impedance clock signals when edge rates require it, maintain a continuous ground reference, and avoid stub branches. Decoupling and crystal-component placement must follow the manufacturer application and layout guidance, because loop area and return-path discontinuities can degrade clock stability.
Where can I buy the ICS511MIT?
Use the Request a Quote form on this page to request current unit availability, minimum order quantity, and lead time for the ICS511MIT. Since the device is listed as obsolete, confirm the condition of any stock and whether it is original, traceable material before committing it to a production build. A maintenance or repair order may be practical, but a new design should evaluate a currently supported timing solution.
What are the key specifications of the ICS511MIT?
The key identified specifications of the ICS511MIT are a 160 MHz maximum frequency, PLL clock-multiplier operation, clock or crystal reference input, and an 8-SOIC surface-mount package measuring 3.90 mm wide. It is shipped in tape-and-reel format and is listed as obsolete. Additional operating details such as supply voltage, jitter, current, and full frequency limits must be taken from the manufacturer datasheet.
Can the ICS511MIT be redesigned with a currently active clock generator?
Yes, but the redesign requires more than matching an SOIC footprint. The replacement must support the required reference frequency, integer multiplication ratios, output frequency, voltage levels, jitter tolerance, and enable or power-sequencing behavior. Treat this as a clock-tree engineering task, validate the first prototypes with a scope or frequency analyzer, and run signal-integrity checks on every downstream clock consumer before production release.

Mühendislik referans verileri: ICS511MIT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the ICS511MIT when maintaining an existing qualified design that specifically specifies this ordering code, especially where the board requires a clock or crystal reference, PLL multiplication, and operation up to the listed 160 MHz frequency. Choose the ICS511MT when its manufacturer-defined suffix ratings match the original design and tape-and-reel handling is required. Consider the ICS511MI for a legacy design when the electrical specifications match and tube packing is acceptable for the assembly process. The ICS511M and ICS511ML require confirmation of frequency, temperature, and pin-level details before use. Because the documented candidates are obsolete, no direct substitute should be released without checking the datasheet, validating jitter and output waveform at the load, and updating controlled BOM and service documentation.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ICS511M ICS511MT ICS511MI ICS511ML
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics

Ana Farklılayıcılar

  • Documented high-frequency ICS511 clock-generator positioning (karşılaştırma:ICS511M)
  • Same-family alternative with matching tape-and-reel logistics (karşılaştırma:ICS511MI)
  • Direct ordering-code continuity within the ICS511 family (karşılaştırma:ICS511MT)

Tasarım Notları

Treat the reference input and clock outputs as high-speed signals even when the reference frequency is relatively low. Place the ICS511MIT close to the oscillator or crystal network, keep the reference path short, and avoid routing it beneath digital return currents. Place any crystal at the device pins and keep unrelated high-current switching nodes away from the oscillator area to reduce supply-to-output coupling and clock jitter.

Confirm output amplitude, edge rate, and load capability at the far end of the clock route. If the trace length or edge rate creates a transmission-line condition, use a controlled-impedance layout with a defined termination strategy instead of relying on a point probe at the generator. Avoid long stubs and test taps that add capacitive loading, because either effect can degrade rise time and shift the timing relationship seen by downstream logic.

Do not treat every ICS511 ordering code as electrically identical. Verify the exact pinout, supply voltage, reference-frequency range, output-frequency limit, temperature grade, and feedback configuration before replacing the ICS511MIT. A package match and a 160 MHz class headline value do not prove timing compatibility. For production maintenance, record the approved alternate part number and validate it against the original schematic and operating envelope.

Follow the manufacturer bypass-capacitor recommendations and provide the required supply decoupling directly at the device pins. A clock generator can translate supply noise directly into output jitter, especially when the PLL multiplies a reference containing periodic disturbances. Route the return current through an uninterrupted ground plane, keep the decoupling loop compact, and verify supply ripple at the IC rather than only at the power supply connector.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The indexed product information identifies the device as obsolete but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Compliance attributes therefore remain unknown.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ICS511MIT ICS511MIT datasheet ICS511MIT datasheet pdf ICS511MIT pinout ICS511MIT 8-SOIC ICS511MIT 160MHz ICS511MIT equivalent ICS511MIT replacement ICS511MIT vs ICS511MT Renesas ICS511MIT ICS511MIT clock generator application ICS511MIT price ICS511MIT stock ICS511MIT cross reference

İlgili Bileşenler ve Terimler

Renesas Electronics ICS511MIT ICS511M ICS511MT ICS511MI ICS511ML PLL phase-locked loop clock generator clock multiplier frequency synthesizer clock and timing IC clock tree 160 MHz 8-SOIC SOIC family surface mount SMD package crystal reference clock reference output jitter clock routing integrated circuit semiconductor obsolete component
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle