LM2903P-MAND - Dual Open-Collector Comparator | Texas Instruments
MPN: LM2903P-MAND ✓ AktifLM2903P-MAND Genel Bakış
A comparator is an analog signal-conditioning IC that occupies the comparator hierarchy within analog signal processing and broader semiconductor systems. Unlike an operational amplifier, a comparator is optimized for fast logic-level decisions and normally has open-collector outputs suited to pulling a wired bus or logic node high. The LM2903P-MAND contains two such channels, allowing a single component to monitor two thresholds, supervise two signals, or implement a window-style decision function.
The principal features of the LM2903P-MAND are its dual-channel architecture, differential inputs, open-collector outputs, and PDIP-8 package. Each channel can use its non-inverting and inverting inputs around a common reference. The open-collector outputs require an external pull-up resistor when the output must actively drive a high voltage level. This arrangement also permits several open-collector outputs to share a bus when their operating conditions and logic polarity are compatible.
The LM2903P-MAND belongs to the Texas Instruments LM2903 dual-comparator family. Its architecture supports operation from a single supply or split supplies, depending on the selected voltage limits and application requirements. Differential comparison is useful when the two inputs are referenced to the same signal source, such as a sensor divided into two scaled voltages. Open-collector outputs are particularly useful for relay, lamp, alarm, and industrial logic interfaces because they provide a straightforward way to sink current.
Typical applications include industrial sensor threshold detection, overvoltage and undervoltage supervision, automotive electronics, battery monitoring, control-panel annunciation, and general-purpose digital control systems. The PDIP package is especially useful in equipment where long-term maintainability, socketed assembly, or hand rework is valuable. Designers should still account for the open-collector pull-up network and verify the common-mode, supply, and output-current limits against the manufacturer datasheet for the exact ordering code.
For a new PCB, route the input traces away from switching nodes and connect a suitable pull-up resistor to each open-collector output. Confirm the input reference arrangement so the required high or low output polarity is obtained without reversing the channel logic. Because the MAND ordering suffix may denote a special qualification or temperature treatment, do not infer its production limits solely from the base LM2903 family designation; consult the exact MPN documentation.
This product page organizes the dual-comparator function, verified package information, practical design notes, and same-footprint alternatives into an engineer-focused guide. It also highlights the distinction between the LM2903 family and the B-version with improved electrical specifications, helping PCB designers separate drop-in continuity from a functional upgrade.
Drop-in alternatifler için LM2903P-MAND — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LM2903P-MAND (aynı form faktörü ve ayağa oturma) — farklı olan Comparator Type, Package, Input Offset Voltage, Supply Configuration, Mounting Type.
LM2903P
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2903VN
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2903AVQPWR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2903BIDR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2903BIDR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2903BIDR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2903P-MAND Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Dual differential comparator |
| Comparator Channel Count | 2 channels |
| Output Topology | Open-collector |
| Comparator Class | Standard general-purpose |
| Input Configuration | Differential inputs |
| Common-Mode Range | Rail-to-rail |
| Package Type | PDIP-8, through-hole |
| Pin Sayısı | 8 pins |
| Supply Configuration | Single supply or split supply |
| Output Pull-Up Requirement | External pull-up resistor required |
LM2903P-MAND Pin Yapısı
| Pin 1 | OUT1 — Open-collector output for comparator channel 1 |
| Pin 2 | IN1- — Inverting input for comparator channel 1 |
| Pin 3 | IN1+ — Non-inverting input for comparator channel 1 |
| Pin 4 | GND — Ground connection |
| Pin 5 | IN2+ — Non-inverting input for comparator channel 2 |
| Pin 6 | IN2- — Inverting input for comparator channel 2 |
| Pin 7 | OUT2 — Open-collector output for comparator channel 2 |
| Pin 8 | VCC — Positive supply connection |
Tipik Uygulamalar
LM2903P-MAND için uygundur 6 uygulamas: Industrial Sensor Threshold Detection, Automotive Voltage Supervision, Relay and Alarm Interface, Battery Monitoring, Control Panel Annunciation, General-Purpose Digital Control.
Industrial Sensor Threshold Detection
The LM2903P-MAND is appropriate for comparing a scaled industrial sensor signal with a reference because it provides two independent differential comparator channels. According to the Texas Instruments LM2903 documentation, each channel supports single- or split-supply operation, allowing the design to use the same device for two related threshold decisions. Its open-collector outputs can sink current into a PLC input, alarm driver, or relay interface, while an external pull-up establishes the inactive logic level. The 8-pin PDIP package also makes the part practical for panel controllers and maintainable industrial equipment. Before release, verify the exact MAND suffix's common-mode range, supply limits, input offset, and temperature rating.
Önerilen
Automotive Voltage Supervision
The LM2903P-MAND can implement overvoltage, undervoltage, or rail-to-rail supervision when one channel evaluates a divided supply against a reference and the other handles a second threshold. According to Texas Instruments, the LM2903 family includes differential comparators designed for a broad range of supply arrangements and includes automotive-oriented family variants. The open-collector output provides a practical way to signal a controller, lamp driver, or discrete logic stage rather than driving a high-current load directly. Through-hole PDIP-8 construction supports prototypes and serviceable automotive electronics platforms. Final automotive approval must depend on the exact MAND traceability, qualification, temperature grade, and operating limits stated in its ordering documentation.
Önerilen
Relay and Alarm Interface
The LM2903P-MAND is useful as the decision element preceding a relay or alarm circuit because its open-collector output naturally sinks current to a pulled-up logic node. According to the Texas Instruments LM2903 product documentation, the device contains two independent differential comparator channels with open-collector outputs. Each channel can compare a conditioned sensor voltage with a reference, and the resulting open-collector state can feed a transistor driver, isolation stage, or PLC input. The external pull-up should be sized against the required switching speed and leakage current, while a relay coil still requires suitable drive current and flyback protection. The PDIP-8 package simplifies hand assembly and field replacement.
Önerilen
Battery Monitoring
The LM2903P-MAND can monitor two battery-derived thresholds when separate resistor dividers feed the non-inverting and inverting inputs of its two channels. According to the Texas Instruments LM2903 documentation, the dual differential architecture permits independent decisions while open-collector outputs provide flexible interfacing to a charger, fuel gauge, or system controller. The comparator approach avoids continuously operating a microcontroller analog input, although divider accuracy, input bias error, and reference quality still determine threshold precision. A pull-up resistor is required for each output. Verify that the battery voltage and transient environment remain inside the exact MAND device's operating limits before using the part in a protection circuit.
Önerilen
Control Panel Annunciation
A dual comparator such as the LM2903P-MAND can supervise two panel conditions and provide open-collector flags for lamps, buzzers, or digital status inputs. According to the Texas Instruments LM2903 family information, the device has two differential channels and open-collector outputs. Each channel can compare an incoming analog indication with a shared or separate reference, and the pulled-up output remains compatible with common digital logic levels. The PDIP-8 package is useful for control panels where through-hole assembly and straightforward replacement are preferred. Engineers should define the intended output polarity for each channel, ensure unused inputs remain within the specified common-mode range, and select pull-up values that satisfy both noise immunity and switching requirements.
Önerilen
General-Purpose Digital Control
The LM2903P-MAND fits legacy and industrial digital-control systems that require analog thresholds to become logic decisions. According to Texas Instruments, the LM2903 is a dual differential comparator with open-collector outputs, making it suitable for conditioning a control signal before it reaches a microcontroller or discrete logic stage. The two channels can implement independent comparisons, allowing a compact implementation without duplicating single-comparator packages. Its PDIP-8 form factor supports through-hole assembly and repair. Layout should keep high-current or inductive signals away from the differential inputs, add local supply bypassing according to the exact datasheet, and use independent pull-up resistors where each output drives a separate logic node.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LM2903P-MAND — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LM2903P | LM2903V | LM2903AV | LM2903B | LM2903 |
|---|---|---|---|---|---|---|
| Package | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi |
| Comparator Type | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator |
| Channel Count | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Output Topology | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector |
| Supply Configuration | Single or split supply | Single or split supply | Single or split supply | Single or split supply | Single or split supply | Single or split supply |
Ana Farklılayıcılar
- Exact MAND ordering option retains the LM2903 dual-comparator PCB architecture (karşılaştırma:LM2903P)
- Maintains two open-collector channels rather than changing the output architecture (karşılaştırma:LM2903B)
- Uses a serviceable through-hole package for accessible PCB assembly (karşılaştırma:onsemi LM2903)
Tasarım Notları
Place each open-collector pull-up resistor close to its corresponding OUT pin to minimize trace inductance and ringing during output transitions. Route the two differential input pairs away from relay-coil wiring, switching-power nodes, and high-current return paths. Because the PDIP-8 leads provide generous spacing, preserve that separation on the board rather than routing an input pair directly beneath a noisy power stage. Confirm the exact pin assignment against the MAND datasheet before fabrication.
Do not assume that every LM2903 ordering code has identical qualification or environmental limits. The base LM2903P and the MAND suffix appear in separate exact-part listings, while the MAND suffix may denote specialized production treatment. Review the ordering-information table for temperature grade, qualification, marking, and packaging. Also keep unused comparator inputs connected to a defined potential inside the specified common-mode range rather than allowing them to float.
Calculate the pull-up network from the logic supply voltage, required output rise time, receiver leakage, and the maximum sink current of the comparator output. A lower pull-up resistance produces a faster rising edge but increases continuous current whenever the open-collector output is low. Keep supply-return current separate from sensitive input returns where practical, and apply the bypass configuration and operating limits specified in the exact manufacturer datasheet.
For applications that combine two thresholds, allocate one input pair and one pull-up to each decision so that channel-to-channel coupling is minimized. If a shared reference is used, route it as a low-impedance node and account for offset voltage when defining trip points. Avoid placing long unprotected input traces next to the PDIP package leads, especially in switching power supplies, motor controllers, or systems with appreciable common-mode transients.
Uyumluluk Bilgisi
No exact compliance declaration for LM2903P-MAND was stated in the manufacturer or distributor records. Check the exact ordering documentation before making an environmental or automotive qualification claim.