Texas Instruments

LM2903P-MAND - Dual Open-Collector Comparator | Texas Instruments

MPN: LM2903P-MAND ✓ فعال
Single supply or split supply Vdss PDIP-8, through-hole Package
MOQ: 1 |

LM2903P-MAND جائزہ

The Texas Instruments LM2903P-MAND is a dual differential comparator with two independent comparator channels and open-collector outputs, packaged in an 8-pin PDIP package. The device compares two input voltages at each channel and provides a logic-level indication of their relative relationship. Its through-hole PDIP package supports straightforward PCB assembly, prototyping, repair, and applications that favor accessible leads over a surface-mount footprint.

A comparator is an analog signal-conditioning IC that occupies the comparator hierarchy within analog signal processing and broader semiconductor systems. Unlike an operational amplifier, a comparator is optimized for fast logic-level decisions and normally has open-collector outputs suited to pulling a wired bus or logic node high. The LM2903P-MAND contains two such channels, allowing a single component to monitor two thresholds, supervise two signals, or implement a window-style decision function.

The principal features of the LM2903P-MAND are its dual-channel architecture, differential inputs, open-collector outputs, and PDIP-8 package. Each channel can use its non-inverting and inverting inputs around a common reference. The open-collector outputs require an external pull-up resistor when the output must actively drive a high voltage level. This arrangement also permits several open-collector outputs to share a bus when their operating conditions and logic polarity are compatible.

The LM2903P-MAND belongs to the Texas Instruments LM2903 dual-comparator family. Its architecture supports operation from a single supply or split supplies, depending on the selected voltage limits and application requirements. Differential comparison is useful when the two inputs are referenced to the same signal source, such as a sensor divided into two scaled voltages. Open-collector outputs are particularly useful for relay, lamp, alarm, and industrial logic interfaces because they provide a straightforward way to sink current.

Typical applications include industrial sensor threshold detection, overvoltage and undervoltage supervision, automotive electronics, battery monitoring, control-panel annunciation, and general-purpose digital control systems. The PDIP package is especially useful in equipment where long-term maintainability, socketed assembly, or hand rework is valuable. Designers should still account for the open-collector pull-up network and verify the common-mode, supply, and output-current limits against the manufacturer datasheet for the exact ordering code.

For a new PCB, route the input traces away from switching nodes and connect a suitable pull-up resistor to each open-collector output. Confirm the input reference arrangement so the required high or low output polarity is obtained without reversing the channel logic. Because the MAND ordering suffix may denote a special qualification or temperature treatment, do not infer its production limits solely from the base LM2903 family designation; consult the exact MPN documentation.

This product page organizes the dual-comparator function, verified package information, practical design notes, and same-footprint alternatives into an engineer-focused guide. It also highlights the distinction between the LM2903 family and the B-version with improved electrical specifications, helping PCB designers separate drop-in continuity from a functional upgrade.

کے لیے ڈراپ اِن متبادل LM2903P-MAND — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2903P-MAND (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Comparator Type, Package, Input Offset Voltage, Supply Configuration, Mounting Type.

Texas Instruments
Comparator Type: Dual differential voltage comparator
Package: 8-pin TSSOP (PW)
Supply Configuration: Single supply or dual supplies
موازنہ کریں LM2903P-MAND →
Texas Instruments
Comparator Type: Dual differential comparator
Package: 8-pin SOIC (D)
Input Offset Voltage: 0.37 mV
موازنہ کریں LM2903P-MAND →
Texas Instruments
Comparator Type: Dual differential comparator
Package: 8-pin PDIP
Input Offset Voltage: 0.37 mV for LM2903B family
موازنہ کریں LM2903P-MAND →
onsemi
Comparator Type: Dual general-purpose voltage comparator
Package: 8-pin PDIP
Input Offset Voltage: Low offset voltage
موازنہ کریں LM2903P-MAND →

LM2903P

✅ ڈراپ-اِن
Texas Instruments
📦 PDIP-8
Dual differential comparator · 2 · Open-collector · Rail-to-rail · 2 V minimum · Up to 38 V for LM2903B family · 0.37 mV for LM2903B family · 3.5 nA for LM2903B family

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2903VN

✅ ڈراپ-اِن
onsemi
📦 PDIP-8
Dual general-purpose voltage comparator · 2 · 2 V to 36 V · Rail-to-rail · Open-collector · 8-pin PDIP · Through-hole · -40°C to +125°C

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2903AVQPWR

✅ ڈراپ-اِن
Texas Instruments
📦 PDIP-8
Dual differential voltage comparator · 2 · Single supply or dual supplies · 30 V for V-suffix devices; 32 V for non-V devices · 0.4 mA typical per comparator · Open-collector · Differential input

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2903BIDR

✅ ڈراپ-اِن
Texas Instruments
📦 PDIP-8
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2903BIDR

✅ ڈراپ-اِن
Texas Instruments
📦 PDIP-8
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2903BIDR

✅ ڈراپ-اِن
Texas Instruments
📦 PDIP-8
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2903P-MAND زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Dual differential comparator
Comparator Channel Count 2 channels
Output Topology Open-collector
Comparator Class Standard general-purpose
Input Configuration Differential inputs
Common-Mode Range Rail-to-rail
Package Type PDIP-8, through-hole
پن کی تعداد 8 pins
Supply Configuration Single supply or split supply
Output Pull-Up Requirement External pull-up resistor required

LM2903P-MAND پن کنفیگریشن

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
پن 1 OUT1 — Open-collector output for comparator channel 1
پن 2 IN1- — Inverting input for comparator channel 1
پن 3 IN1+ — Non-inverting input for comparator channel 1
پن 4 GND — Ground connection
پن 5 IN2+ — Non-inverting input for comparator channel 2
پن 6 IN2- — Inverting input for comparator channel 2
پن 7 OUT2 — Open-collector output for comparator channel 2
پن 8 VCC — Positive supply connection

عام استعمالات

LM2903P-MAND کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Threshold Detection, Automotive Voltage Supervision, Relay and Alarm Interface, Battery Monitoring, Control Panel Annunciation, General-Purpose Digital Control.

🏭

Industrial Sensor Threshold Detection

The LM2903P-MAND is appropriate for comparing a scaled industrial sensor signal with a reference because it provides two independent differential comparator channels. According to the Texas Instruments LM2903 documentation, each channel supports single- or split-supply operation, allowing the design to use the same device for two related threshold decisions. Its open-collector outputs can sink current into a PLC input, alarm driver, or relay interface, while an external pull-up establishes the inactive logic level. The 8-pin PDIP package also makes the part practical for panel controllers and maintainable industrial equipment. Before release, verify the exact MAND suffix's common-mode range, supply limits, input offset, and temperature rating.

🚗

Automotive Voltage Supervision

The LM2903P-MAND can implement overvoltage, undervoltage, or rail-to-rail supervision when one channel evaluates a divided supply against a reference and the other handles a second threshold. According to Texas Instruments, the LM2903 family includes differential comparators designed for a broad range of supply arrangements and includes automotive-oriented family variants. The open-collector output provides a practical way to signal a controller, lamp driver, or discrete logic stage rather than driving a high-current load directly. Through-hole PDIP-8 construction supports prototypes and serviceable automotive electronics platforms. Final automotive approval must depend on the exact MAND traceability, qualification, temperature grade, and operating limits stated in its ordering documentation.

🔧

Relay and Alarm Interface

The LM2903P-MAND is useful as the decision element preceding a relay or alarm circuit because its open-collector output naturally sinks current to a pulled-up logic node. According to the Texas Instruments LM2903 product documentation, the device contains two independent differential comparator channels with open-collector outputs. Each channel can compare a conditioned sensor voltage with a reference, and the resulting open-collector state can feed a transistor driver, isolation stage, or PLC input. The external pull-up should be sized against the required switching speed and leakage current, while a relay coil still requires suitable drive current and flyback protection. The PDIP-8 package simplifies hand assembly and field replacement.

⚡

Battery Monitoring

The LM2903P-MAND can monitor two battery-derived thresholds when separate resistor dividers feed the non-inverting and inverting inputs of its two channels. According to the Texas Instruments LM2903 documentation, the dual differential architecture permits independent decisions while open-collector outputs provide flexible interfacing to a charger, fuel gauge, or system controller. The comparator approach avoids continuously operating a microcontroller analog input, although divider accuracy, input bias error, and reference quality still determine threshold precision. A pull-up resistor is required for each output. Verify that the battery voltage and transient environment remain inside the exact MAND device's operating limits before using the part in a protection circuit.

🖥️

Control Panel Annunciation

A dual comparator such as the LM2903P-MAND can supervise two panel conditions and provide open-collector flags for lamps, buzzers, or digital status inputs. According to the Texas Instruments LM2903 family information, the device has two differential channels and open-collector outputs. Each channel can compare an incoming analog indication with a shared or separate reference, and the pulled-up output remains compatible with common digital logic levels. The PDIP-8 package is useful for control panels where through-hole assembly and straightforward replacement are preferred. Engineers should define the intended output polarity for each channel, ensure unused inputs remain within the specified common-mode range, and select pull-up values that satisfy both noise immunity and switching requirements.

⚙️

General-Purpose Digital Control

The LM2903P-MAND fits legacy and industrial digital-control systems that require analog thresholds to become logic decisions. According to Texas Instruments, the LM2903 is a dual differential comparator with open-collector outputs, making it suitable for conditioning a control signal before it reaches a microcontroller or discrete logic stage. The two channels can implement independent comparisons, allowing a compact implementation without duplicating single-comparator packages. Its PDIP-8 form factor supports through-hole assembly and repair. Layout should keep high-current or inductive signals away from the differential inputs, add local supply bypassing according to the exact datasheet, and use independent pull-up resistors where each output drives a separate logic node.

تجویز کردہ پروڈکٹس کا خلاصہ

LM2903P Texas Instruments استعمال ہوتا ہے: Industrial Sensor Threshold Detection, Relay and Alarm Interface, Battery Monitoring, Control Panel Annunciation, General-Purpose Digital Control LM2903B Drop-in dual comparator with upgraded B-version electrical specifications استعمال ہوتا ہے: Industrial Sensor Threshold Detection, Automotive Voltage Supervision, Battery Monitoring, General-Purpose Digital Control LM2902KPWR Texas Instruments استعمال ہوتا ہے: Automotive Voltage Supervision LM2903V Temperature-grade comparison for industrial relay controls استعمال ہوتا ہے: Relay and Alarm Interface LM2903AV Temperature-grade dual comparator option for harsh panels استعمال ہوتا ہے: Control Panel Annunciation
Where can I download the LM2903P-MAND datasheet PDF?
The LM2903P-MAND datasheet can be obtained through Texas Instruments' LM2903 documentation page or the exact-part Specialty Logic datasheet page. According to the manufacturer LM2903 documentation, the LM2903 is a dual differential comparator; the ordering-specific document should be checked for the MAND suffix qualification and temperature limits. Use the manufacturer link for controlled revisions, and use the Specialty Logic page when you need the exact MPN-specific document.
What are the key specifications of LM2903P-MAND that engineers should know?
The LM2903P-MAND is a dual differential comparator with two open-collector output channels in an 8-pin PDIP package. According to the Texas Instruments LM2903 product documentation and the LM2903P distributor record, the device is a standard general-purpose, rail-to-rail comparator. Its defining engineering characteristics are the 2-channel architecture, differential inputs, open-collector outputs, single- or split-supply capability, and through-hole package.
What is the LM2903P-MAND pinout?
The LM2903P-MAND uses the standard PDIP-8 comparator arrangement: pin 1 is OUT1, pins 2 and 3 are IN1− and IN1+, pin 4 is GND, pins 5 and 6 are IN2+ and IN2−, pin 7 is OUT2, and pin 8 is VCC. According to the Texas Instruments LM2903 family documentation, the two channels are independent. Verify the pin-description table in the exact MPN datasheet before assigning PCB nets.
What type of comparator is LM2903P-MAND?
The LM2903P-MAND is a dual differential comparator with open-collector outputs. According to Texas Instruments' LM2903 documentation, it contains two independent precision voltage-comparison channels. Each channel evaluates an inverting and non-inverting input, making the device appropriate for threshold detection, signal crossing, supervision, and alarm functions where a logic decision is required.
Does LM2903P-MAND support single and split power supplies?
Yes, the LM2903P-MAND family supports single-supply and split-supply operation. According to the Texas Instruments LM2903 documentation, the comparators are designed for operation from a single supply and can also operate from split supplies. Exact minimum, maximum, and common-mode limits must be taken from the LM2903P-MAND datasheet because the base family description does not establish every MAND-specific production limit.
Why does LM2903P-MAND need an external pull-up resistor?
The LM2903P-MAND uses open-collector outputs, so an external pull-up resistor is required to establish a high output voltage. According to the Texas Instruments LM2903 documentation, each output can sink current while the pull-up supplies the high state. Choose the resistor to balance rise time, supply voltage, input leakage, and the current sunk by the receiving logic or another wired-OR node.
What can replace LM2903P-MAND without changing the PCB?
The LM2903P, LM2903V, LM2903AV, and LM2903B are the closest same-brand PDIP-8 alternatives, while LM2903 devices from onsemi and Diodes Incorporated provide cross-brand options for review. The closest functional substitute remains the base LM2903P because it has the same 2-channel architecture and PDIP-8 footprint. Qualification, temperature range, and electrical limits must be checked before substituting the MAND ordering code.
What is the best onsemi equivalent for LM2903P-MAND?
The onsemi LM2903 is the principal cross-brand equivalent to compare against LM2903P-MAND because it is a dual, low-offset-voltage comparator with open-collector operation. According to the onsemi LM2903 product page, the device is intended for single- or split-supply operation and is used in industrial, automotive, and consumer applications. Confirm PDIP-8 availability, pinout, supply limits, and temperature qualification before approval.
Is LM2903P-MAND the same as LM2903P?
The LM2903P-MAND and LM2903P share the same 2-channel comparator architecture and PDIP-8 package, but the ordering suffix can indicate different qualification or manufacturing treatment. According to the Texas Instruments LM2903 family documentation and the LM2903P-MAND distributor listing, both identify the device as an LM2903-family comparator. Do not treat the suffixes as automatically identical until the exact ordering table confirms their temperature and qualification differences.
When should I choose LM2903P-MAND over LM2903B?
Choose LM2903P-MAND when the base LM2903 electrical behavior and the exact MAND ordering qualification are required for an existing through-hole design. Choose LM2903B when a redesigned board can benefit from the documented B-version improvements, including lower offset voltage, higher supply-voltage capability, lower supply current, lower input bias current, faster response, and improved ESD robustness. The B-version is presented by TI as a drop-in replacement for A and V versions.
Is LM2903P-MAND suitable for industrial sensor threshold detection?
The LM2903P-MAND is suitable for industrial sensor threshold detection when its verified supply, common-mode, temperature, and output ratings satisfy the application. According to the Texas Instruments LM2903 documentation, the device provides two differential channels and open-collector outputs. A scaled sensor signal can be compared with a reference, while the open-collector output drives an alarm, PLC input, relay circuit, or other logic load.
How do I use LM2903P-MAND with a relay or alarm input?
Use the open-collector output to sink current through a relay-driver or other interface stage rather than driving a relay coil directly. According to the Texas Instruments LM2903 family documentation, the output requires a pull-up and is intended as a logic output, not an unrestricted load driver. Add the interface transistor or driver, select the pull-up for the required speed and current, and account for flyback protection.
What is the lead time and stock status of LM2903P-MAND?
Current stock and lead time for LM2903P-MAND should be requested through the Request a Quote form on this page. The exact-part distributor listing confirms that LM2903P-MAND is an orderable catalog part, but the page content does not state a stable lead-time interval or a guaranteed inventory quantity. The form allows the requested quantity and production timing to be checked against the current supply channel.
How much does LM2903P-MAND cost?
Use the Request a Quote form on this page for the current price of LM2903P-MAND. The available listing confirms the exact MPN but does not print a complete quantity-break table for it, so a current unit price should not be inferred from LM2903P or family-level listings. The quote form is the appropriate channel for pricing, quantity breaks, stock, and requested delivery timing.
Can I buy LM2903P-MAND online through this page?
Yes, LM2903P-MAND can be requested through the Request a Quote form on this page. The exact-part distributor record identifies LM2903P-MAND as a Texas Instruments comparator, allowing the request to be tied to the correct ordering code rather than a related LM2903 member. Include the required quantity, delivery timing, and target electrical or qualification requirements with the request.
What design precautions apply when placing LM2903P-MAND on a PCB?
Keep the LM2903P-MAND input and output routing away from high-current switching paths, place each output pull-up close to the relevant output pin, and confirm that the logic polarity matches the intended threshold action. According to the Texas Instruments LM2903 documentation, the two channels are independent, so their input references and pull-ups must be designed separately. Also avoid unused-channel inputs floating outside the device's specified common-mode range.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2903P-MAND — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Select LM2903P-MAND for an existing PDIP-8 design that specifically calls for the MAND ordering option, particularly when its qualification or environmental treatment is required. LM2903P is the closest base-family option when those ordering-specific requirements do not apply. LM2903V and LM2903AV are useful same-footprint alternatives when their respective temperature-grade conditions better fit the equipment. For a new design, LM2903B offers the same PDIP continuity plus documented improvements in offset voltage, bias current, supply current, response time, and ESD performance. Cross-brand onsemi or Diodes Incorporated LM2903 devices should be considered only after their exact PDIP ordering code, pinout, limits, temperature range, and qualification have been checked. In every case, verify supply voltage, common-mode range, output sink current, and pull-up requirements from the selected part's manufacturer documentation.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM2903P LM2903V LM2903AV LM2903B LM2903
Package PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi
Comparator Type Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator
Channel Count 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Output Topology Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector
Supply Configuration Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply

اہم امتیازی خصوصیات

  • Exact MAND ordering option retains the LM2903 dual-comparator PCB architecture (بمقابلہLM2903P)
  • Maintains two open-collector channels rather than changing the output architecture (بمقابلہLM2903B)
  • Uses a serviceable through-hole package for accessible PCB assembly (بمقابلہonsemi LM2903)

ڈیزائن نوٹس

Place each open-collector pull-up resistor close to its corresponding OUT pin to minimize trace inductance and ringing during output transitions. Route the two differential input pairs away from relay-coil wiring, switching-power nodes, and high-current return paths. Because the PDIP-8 leads provide generous spacing, preserve that separation on the board rather than routing an input pair directly beneath a noisy power stage. Confirm the exact pin assignment against the MAND datasheet before fabrication.

Do not assume that every LM2903 ordering code has identical qualification or environmental limits. The base LM2903P and the MAND suffix appear in separate exact-part listings, while the MAND suffix may denote specialized production treatment. Review the ordering-information table for temperature grade, qualification, marking, and packaging. Also keep unused comparator inputs connected to a defined potential inside the specified common-mode range rather than allowing them to float.

Calculate the pull-up network from the logic supply voltage, required output rise time, receiver leakage, and the maximum sink current of the comparator output. A lower pull-up resistance produces a faster rising edge but increases continuous current whenever the open-collector output is low. Keep supply-return current separate from sensitive input returns where practical, and apply the bypass configuration and operating limits specified in the exact manufacturer datasheet.

For applications that combine two thresholds, allocate one input pair and one pull-up to each decision so that channel-to-channel coupling is minimized. If a shared reference is used, route it as a low-impedance node and account for offset voltage when defining trip points. Avoid placing long unprotected input traces next to the PDIP package leads, especially in switching power supplies, motor controllers, or systems with appreciable common-mode transients.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No exact compliance declaration for LM2903P-MAND was stated in the manufacturer or distributor records. Check the exact ordering documentation before making an environmental or automotive qualification claim.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-17 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lm2903p datasheet LM2903P-MAND datasheet LM2903P-MAND pinout LM2903P-MAND equivalent LM2903P-MAND replacement LM2903P-MAND price LM2903P-MAND stock LM2903P-MAND PDIP-8 comparator LM2903P-MAND vs LM2903B Texas Instruments LM2903P-MAND LM2903P-MAND open collector output LM2903P-MAND drop-in replacement

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2903P-MAND LM2903P LM2903V LM2903AV LM2903B onsemi Diodes Incorporated dual differential comparator comparator analog comparator analog signal conditioning semiconductor open-collector output differential input PDIP-8 DIP package through-hole package surface-mount alternative single-supply operation split-supply operation input offset voltage input bias current propagation delay pull-up resistor
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں