STMicroelectronics

LM2904AHYPT - Dual Low-Power Op Amp | STMicroelectronics

MPN: LM2904AHYPT ✓ Aktif
20 nA Id 8-TSSOP Package Internally compensated Speed
MOQ: 1 |

LM2904AHYPT Genel Bakış

STMicroelectronics LM2904AHYPT is a low-power, dual bipolar operational amplifier with two independent amplifiers, internally compensated frequency compensation, and an 8-TSSOP package. The device is designed for general-purpose signal-conditioning applications where two amplifiers are required on one board. The verified product information identifies a single-ended, two-circuit amplifier configuration in an 8-pin TSSOP.

A dual operational amplifier combines two independent amplifier sections in one package. In the broader semiconductor hierarchy, an operational amplifier is an analog integrated circuit used within the amplifier and signal-conditioning family. Each LM2904AHYPT section provides gain, filtering, buffering, or error amplification, while the common package can reduce board area and simplify component procurement for dual-channel circuits.

The principal advantages of this device are its low-power bipolar construction, dual-channel organization, and internally compensated architecture. Internal compensation removes the need for external frequency-compensation components in standard closed-loop operation. The 8-TSSOP package also offers a compact surface-mount format suitable for high-density analog and embedded-control boards. These characteristics make the device useful when a general-purpose amplifier must operate without external compensation networks.

Each amplifier section operates independently, allowing one channel to process a sensor signal while the other handles a control, feedback, or monitoring function. The LM2904 family is associated with approximately 100 dB open-loop gain, 1.1 MHz gain-bandwidth behavior, and 20 nA input bias current. Since the exact limits for every electrical condition are not listed on the product page, designers should confirm voltage, current, common-mode, and temperature limits against the manufacturer datasheet before final circuit sign-off.

Typical uses include low-frequency sensor conditioning, buffer stages, active filters, differential signal amplification, and general embedded analog interfaces. Because the package contains two amplifiers, the device can consolidate matching channels in instrumentation, industrial control, audio preamplification, and test-equipment input stages. TSSOP-8 placement is particularly useful when component count and routing density are important.

For layout, place each decoupling capacitor close to the corresponding supply pins and route input and feedback paths away from switching nodes. Confirm output swing, input common-mode range, stability, and load drive at the actual supply voltage. If a replacement uses the same footprint, verify that the enable, shutdown, slew-rate, and output-current characteristics remain compatible with the original design.

This page combines the manufacturer device identity, verified distributor descriptions, package information, family-level operating characteristics, and practical replacement guidance into an engineering-focused reference for evaluating the LM2904AHYPT.

Drop-in alternatifler için LM2904AHYPT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

LM2904HYPT

✅ Yerleştirme
📦 8-TSSOP
Different ordering suffix; electrical and qualification limits require verification against the manufacturer ordering table

📋 Katalogda Olmayan Referans Alternatifi

LM2904AYPT

✅ Yerleştirme
STMicroelectronics
📦 8-TSSOP
2 · General-purpose, bipolar, single-ended · 1.1 MHz · 0.6 V/us · 3 V to 30 V · +/-1.5 V to +/-15 V · 20 nA (typical) · 2 mV typical / 7 mV maximum (A grade)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM2904AHYPT Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Dual operational amplifier
Number of Amplifier Channels 2 channels
Circuit Type 2-circuit single-ended
Technology Bipolar
Power Class Low-power
Frequency Compensation Internally compensated
Paket 8-TSSOP
Montaj Türü Surface mount
Open-Loop Gain 100 dB
Gain-Bandwidth Product 1.1 MHz
Input Bias Current 20 nA
Pin Sayısı 8 pins
Çıkış Türü Single-ended
Amplifier Independence 2 independent amplifiers

LM2904AHYPT Pin Yapısı

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 IN2+ — Amplifier 2 non-inverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 V+ — Positive supply connection

Tipik Uygulamalar

LM2904AHYPT için uygundur 6 uygulamas: Industrial Sensor Signal Conditioning, Active Filtering and Control Loops, Audio Preamplification, Test and Measurement Buffering, Battery-Powered Embedded Interfaces, Power-Supply Feedback Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM2904AHYPT fits industrial sensor-conditioning circuits that require two independent amplifier channels in a compact footprint. One section can amplify a low-level transducer signal while the other handles monitoring, filtering, or error amplification. Its internally compensated bipolar architecture simplifies stable closed-loop implementation without external compensation parts, while the family characteristics of 100 dB open-loop gain and 1.1 MHz gain-bandwidth product support low-to-moderate frequency signal paths. Confirm the input common-mode range, output swing, offset voltage, and supply limits against the actual sensor excitation and industrial temperature requirements.

🔧

Active Filtering and Control Loops

The LM2904AHYPT is appropriate for active filters, integrators, and control loops that need independent gain stages near the controller. Its 1.1 MHz gain-bandwidth family characteristic provides useful bandwidth for low-frequency precision and process-control signals, while internal frequency compensation allows straightforward closed-loop layouts. Place the device close to the feedback components to minimize parasitic effects, and verify stability with the intended capacitor values and load. The two channels can implement a filter and an error amplifier in one 8-TSSOP package, reducing component count when two functions share the same supply and grounding arrangement.

🎧

Audio Preamplification

The LM2904AHYPT can serve in low-level audio preamplification and buffering circuits where two related channels are needed. One amplifier may condition the left input while the second handles the right input, and each section's internal compensation supports standard inverting or non-inverting feedback arrangements. The approximately 100 dB open-loop gain can provide useful loop gain, while the 1.1 MHz gain-bandwidth family rating is suitable for many audio-band signal paths. Check output drive, slew behavior, input bias current, and output swing for the selected feedback network before using it with low-impedance headphone or line-level loads.

📺

Test and Measurement Buffering

The LM2904AHYPT is suitable for buffering instrumentation signals where source impedance must be isolated from a downstream ADC, comparator, or data-acquisition stage. Two independent sections can reduce loading in adjacent measurement channels, and the compact 8-TSSOP package leaves more PCB area for protection, precision resistors, and analog switches. The internal compensation supports stable closed-loop operation, and the family's 20 nA input bias current can be useful with high-impedance sources. Validate source impedance, input capacitance, output settling, noise, and common-mode limits across the complete measurement range.

🔋

Battery-Powered Embedded Interfaces

The LM2904AHYPT can be used in battery-powered embedded interfaces that require two low-power analog functions without adding a larger quad-amplifier package. It is useful for conditioning a sensor input and buffering a reference, threshold, or control signal around an embedded controller. Its low-power bipolar construction and dual-channel organization help consolidate analog functions, while the 8-TSSOP footprint supports compact surface-mount layouts. Review supply-current behavior over the complete input and output range, account for dropout behavior, and ensure the amplifier remains inside its common-mode range throughout battery discharge.

⚡

Power-Supply Feedback Monitoring

The LM2904AHYPT can supervise an intermediate supply rail by amplifying a divided feedback voltage and comparing or conditioning the result for an ADC or supervisor. The second section can buffer the feedback node, amplify a reference-related signal, or monitor another rail independently. Internal compensation makes the feedback network straightforward, and the dual 8-TSSOP implementation consolidates two monitoring functions in a compact area. Design the divider and compensation values for the required accuracy and bandwidth, check output saturation margins during fault conditions, and verify that the amplifier's supply range remains compatible with the monitored system.

What is the LM2904AHYPT?
The LM2904AHYPT is an STMicroelectronics low-power, dual bipolar operational amplifier packaged in an 8-TSSOP. It contains two independent, internally compensated amplifier sections for general-purpose signal conditioning. According to the STMicroelectronics LM2904AH product page, frequency compensation is implemented internally, which simplifies closed-loop amplifier designs that would otherwise require external compensation components.
What are the key specifications of LM2904AHYPT that engineers should know?
The LM2904AHYPT provides two independent, internally compensated bipolar amplifier channels in an 8-TSSOP surface-mount package. Family-level characteristics include approximately 100 dB open-loop gain, a 1.1 MHz gain-bandwidth product, and 20 nA input bias current. These figures make it suitable for low-frequency buffering, sensor conditioning, filtering, and general analog signal-processing tasks.
Where can I download the LM2904AHYPT datasheet PDF?
The LM2904AHYPT technical documentation is available through the STMicroelectronics LM2904AH product page and the archived 19-page datasheet listing. Use the manufacturer page for the authoritative product information and datasheet link. The distributor datasheet listing also provides an accessible mirror, while the final design should follow the document published by STMicroelectronics.
Where can I find the LM2904AHYPT pinout?
The LM2904AHYPT uses a standard 8-TSSOP dual-op-amp footprint with two amplifier sections, supply pins, and no external compensation terminals. Use the manufacturer datasheet pin configuration when assigning PCB tracks. Because pin naming and electrical limits must follow the exact ordering code, verify the assembly drawing and symbol against the STMicroelectronics documentation before fabrication.
Can LM2904AHYPT replace LM2904HYPT?
The LM2904AHYPT can be considered for an LM2904HYPT replacement only after checking the exact ordering variants, electrical limits, and exposed-pad requirements. Both parts are identified in the same LM2904 family, but suffix differences can indicate different qualification, temperature, or package options. Confirm the manufacturer pinout and datasheet parameters before treating the substitution as production-ready.
What can replace the LM2904AHYPT as a drop-in part?
A valid drop-in replacement for the LM2904AHYPT must use the same 8-TSSOP footprint, preserve the two-amplifier pin arrangement, and satisfy the original circuit's voltage, gain, bandwidth, offset, bias-current, and output-swing requirements. The cross-reference records identify several compatible and possible analogues for the LM2904 family, but a specific candidate should be accepted only after its manufacturer datasheet confirms every electrical and mechanical condition.
Where to buy LM2904AHYPT online?
Use the Request a Quote form on this page to request LM2904AHYPT availability, pricing, and lead time for your required quantity. The manufacturer offers the exact LM2904AHYPT ordering code, and major distributor listings identify the device as an 8-TSSOP dual amplifier. The quote form provides a single route for current commercial confirmation without relying on potentially stale catalog pricing.
What is the price of LM2904AHYPT?
The current commercial price for LM2904AHYPT is obtained through the Request a Quote form on this page because pricing depends on order quantity, shipment destination, and purchasing terms. The device is an established STMicroelectronics catalog part with manufacturer and distributor ordering channels, but a current quote is required for an accurate purchase commitment and delivery plan.
What is the lead time for LM2904AHYPT?
The current lead time for LM2904AHYPT should be confirmed through the Request a Quote form on this page. Manufacturer and distributor product pages support the availability of this ordering code, but production scheduling and regional inventory can change. Include your required quantity, delivery country, and target date in the request so the supplier can provide a meaningful commitment.
Is LM2904AHYPT in stock?
LM2904AHYPT stock status can change by region and quantity, so use the Request a Quote form on this page for the current answer. STMicroelectronics lists the exact LM2904AHYPT ordering code, and distributor catalog pages also identify the component. Submit the required quantity and destination to receive current stock confirmation rather than relying on a general catalog status.
LM2904AHYPT vs LM2904HYPT: which is better?
The LM2904AHYPT and LM2904HYPT are closely related LM2904 dual-amplifier ordering variants, so the correct choice depends on the suffix-specific electrical grade, temperature range, and package details. Both appear in 8-TSSOP-related catalog listings, but the A version must not be assumed interchangeable without checking its manufacturer datasheet. Compare exact supply limits, offset, bias current, and qualification requirements.
What is the difference between LM2904AHYPT and LM2904AYPT?
The LM2904AHYPT and LM2904AYPT belong to the same low-power, dual bipolar LM2904 family, but their suffix codes must be evaluated separately. A distributor description for the LM2904AYPT identifies 100 dB gain, 1.1 MHz bandwidth, and 20 nA input bias current, while the LM2904AHYPT is described as a dual, single-ended 8-TSSOP amplifier. Check the exact ordering table before interchange.
When should I choose LM2904AHYPT over another dual op amp?
Choose the LM2904AHYPT when the design needs two independent, internally compensated bipolar amplifier channels in a compact 8-TSSOP package and operates within the LM2904 family's electrical limits. It is especially practical for low-frequency buffering, sensor conditioning, filtering, and dual-channel embedded analog interfaces. Select a different amplifier when rail-to-rail input/output operation, faster slew rate, lower offset, or lower supply voltage is required.
Is LM2904AHYPT suitable for industrial sensor-conditioning applications?
The LM2904AHYPT can be suitable for industrial sensor-conditioning applications when the sensor signal remains within its input common-mode range and the supply voltage is acceptable. Its two independent channels allow simultaneous amplification or filtering, while internal compensation simplifies implementation. Validate noise, offset, bandwidth, output swing, and temperature performance against the exact operating conditions before releasing an industrial design.
What is the best cross-brand equivalent for the LM2904AHYPT?
The best cross-brand equivalent is the device that preserves the 8-TSSOP dual-op-amp pinout while meeting the original design's voltage, offset, bias-current, gain-bandwidth, output-swing, noise, and temperature requirements. The LM2904 cross-reference records identify compatible products from multiple manufacturers, but their detailed parameters must be confirmed individually. Apply the footprint and electrical checks rather than selecting on the generic LM2904 label alone.

Mühendislik referans verileri: LM2904AHYPT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LM2904AHYPT for general-purpose dual-channel analog designs that use the 8-TSSOP footprint and remain within the LM2904 family's voltage, common-mode, output-swing, and temperature limits. Its two independent, internally compensated bipolar amplifiers are useful for sensor conditioning, buffering, filtering, and dual-channel feedback or monitoring functions. LM2904HYPT is the closer related ordering variant to evaluate when its suffix-specific limits better match the design. LM2904AYPT is also appropriate when the stated 100 dB gain, 1.1 MHz bandwidth, and 20 nA bias-current characteristics align with the requirement, but its exact ordering limits must still be checked. For designs requiring rail-to-rail inputs or outputs, substantially lower offset, faster slew rate, or operation below the LM2904 supply range, choose a different dual amplifier family even if it uses a similar eight-pin footprint.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM2904HYPT LM2904AYPT
Package 8-TSSOP 8-TSSOP 8-TSSOP
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Amplifier Channels 2 circuits 2 circuits 2 circuits
Technology Low-power bipolar Low-power bipolar Low-power bipolar
Frequency Compensation Internal Internal Internal
Special Ordering Grade A-grade LM2904 ordering variant H-grade LM2904 ordering variant A-grade LM2904 ordering variant

Ana Farklılayıcılar

  • Two independent channels in a compact package (karşılaştırma:LM2904HYPT)
  • Documented low-power bipolar implementation (karşılaştırma:LM2904AYPT)
  • Internally compensated dual-amplifier design (karşılaştırma:LM2904HYPT)

Tasarım Notları

Place the supply bypass capacitor immediately between pins 8 and 4, with a short return path to the ground plane. Keep the amplifier inputs and feedback components away from the capacitor and from switching-regulator power paths. The TSSOP-8 footprint supports dense placement, but short feedback loops remain important for stable operation and predictable transient response.

Route both amplifier channels independently and avoid sharing narrow feedback traces between them. Maintain a continuous ground reference beneath and around the package, and connect each bypass capacitor directly to the relevant supply and ground pins. If the LM2904AHYPT follows a switching converter, keep its input and output networks away from the switching node and provide filtering appropriate to the required noise margin.

Do not assume that every LM2904 ordering suffix has identical offset, bias-current, temperature, or qualification limits. Before substituting LM2904HYPT or LM2904AYPT, compare the exact ordering table, supply range, common-mode range, output swing, and package drawing. Also confirm that the TSSOP lead pitch matches the PCB footprint; an 8-TSSOP footprint cannot be treated as an 8-SOIC footprint.

Check closed-loop stability with the intended feedback network, load capacitance, source impedance, and external capacitance at the input and output. Add isolation resistors near the op-amp pins when driving capacitive loads or sampling nodes. The internal compensation simplifies ordinary feedback configurations, but it does not eliminate the need for application-level stability checks.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance status was not stated on the manufacturer product page or in the distributor records.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LM2904AHYPT LM2904AHYPT datasheet LM2904AHYPT datasheet pdf LM2904AHYPT pinout LM2904AHYPT equivalent LM2904AHYPT replacement LM2904AHYPT cross reference LM2904AHYPT vs LM2904HYPT LM2904AHYPT vs LM2904AYPT LM2904AHYPT 8-TSSOP LM2904AHYPT price LM2904AHYPT stock STMicroelectronics LM2904AHYPT LM2904AHYPT dual op amp LM2904AHYPT application circuit

İlgili Bileşenler ve Terimler

STMicroelectronics LM2904AHYPT LM2904HYPT LM2904AYPT LM2904AH operational amplifier dual operational amplifier low-power bipolar op amp analog integrated circuit signal conditioning active filter voltage buffer open-loop gain gain-bandwidth product input bias current frequency compensation 8-TSSOP TSSOP family surface-mount package sensor interface industrial control audio preamplification test and measurement battery-powered equipment
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle