Texas Instruments

LM339APWRG4 - Quad Open-Collector Comparator | Texas Instruments

MPN: LM339APWRG4 ✓ Aktif
2 V to 36 V Vdss 0.8 mA typical Id 14-pin TSSOP Package
MOQ: 1 |

LM339APWRG4 Genel Bakış

The Texas Instruments LM339APWRG4 is a general-purpose quad differential comparator containing four independent comparators in a 14-pin TSSOP package. Each comparator supports single-supply or split-supply operation, and the device uses open-collector outputs for flexible interfacing with TTL, MOS, and CMOS logic families.

A comparator is an analog integrated circuit that compares two input voltages and produces a digital-level indication of their relationship. The LM339 belongs to the comparator hierarchy, which sits alongside amplifiers, analog switches, and sensors as a core building block for signal conditioning. Its differential inputs detect threshold crossings, overvoltage events, zero-crossing points, and magnitude comparisons in control and monitoring circuits.

The LM339APWRG4 provides four comparison channels, a supply-voltage operating range extending to 36 V, a typical supply-current drain of 0.8 mA, and a low typical input bias current. Its open-collector outputs require an external pull-up resistor and permit the output stage to be pulled to the voltage required by the attached logic system. The wide operating range makes the device suitable for industrial control, power-supply monitoring, and interface conversion circuits.

The four channels share a common ground and supply connection but otherwise operate independently. Differential input voltage can be handled over a range equal to the maximum-rated supply voltage, while the common-mode input range includes ground. This architecture is useful when sensing small changes around a ground-referenced signal or when one input is tied to a precision threshold reference.

Typical applications include four-channel level detection, window comparison, battery and power-rail supervision, zero-crossing detection, sensor interfacing, and TTL-to-CMOS translation. In each case, the open-collector output can sink current from a pull-up network while leaving the logic voltage independent of the comparator supply.

When designing around the LM339APWRG4, place the pull-up resistor close to the driven logic input and route comparator inputs away from switching nodes and high-current traces. Because open-collector outputs cannot actively source current, account for the pull-up value when setting rise time. Confirm the input common-mode range and output timing against the system operating limits before releasing the layout.

This page combines manufacturer specifications, package and pin information, practical application guidance, and drop-in replacement analysis to support faster component selection and PCB-level implementation planning.

Drop-in alternatifler için LM339APWRG4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM339APWRG4 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Logic Compatibility, Differential Input Voltage Range, Input Bias Current, Comparator Type.

Texas Instruments
Package: 14-pin TSSOP (PW), 4.40 mm width
Logic Compatibility: TTL, MOS, and CMOS
Differential Input Voltage Range: ±38 V
İle Karşılaştır LM339APWRG4 →
Texas Instruments
Logic Compatibility: TTL, MOS, and CMOS compatible
Differential Input Voltage Range: -38 V to +38 V
Input Bias Current: 3.5 nA
İle Karşılaştır LM339APWRG4 →
Texas Instruments
Logic Compatibility: TTL, MOS, and CMOS
İle Karşılaştır LM339APWRG4 →
Texas Instruments
Package: 14-TSSOP, 0.173 inch x 4.40 mm width
Logic Compatibility: TTL, MOS, and CMOS compatible
Input Bias Current: 3.5 nA maximum
İle Karşılaştır LM339APWRG4 →
Texas Instruments
Package: 14-TSSOP, 4.40 mm width
Differential Input Voltage Range: Equal to maximum-rated supply voltage
Comparator Type: General-purpose differential comparator
İle Karşılaştır LM339APWRG4 →

LM339PWRG4

✅ Yerleştirme
Texas Instruments
📦 14-TSSOP
General-purpose differential comparator · 4 channels · Single supply or dual supply · 30 V for non-V devices · 32 V for non-V devices · 0.8 mA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM339PWRE4

✅ Yerleştirme
Texas Instruments
📦 14-TSSOP
Quad differential comparator · 4 channels · 2 V to 36 V · ±38 V · Includes ground · 300 ns · Open collector · TTL, MOS, and CMOS

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM339PWRG3

✅ Yerleştirme
Texas Instruments
📦 14-TSSOP
Quad differential comparator · 4 channels · 2 V to 36 V · ±1 V to ±18 V · 36 V · ±38 V · 0.37 mV maximum · 3.5 nA maximum

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM339APWR

✅ Yerleştirme
Texas Instruments
📦 14-TSSOP
Quad differential comparator · 4 channels · 2 V to 30 V · 38 V · -38 V to +38 V · Includes ground · Open-collector · 0.37 mV

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM2901PW

✅ Yerleştirme
📦 14-TSSOP
Same 14-pin TSSOP quad-comparator class and 2 V to 36 V operating range; device-specific AC and DC parameters may differ

📋 Katalogda Olmayan Referans Alternatifi

LM339APWRG4 Maksimum Değerlendirmeler & Elektriksel Özellikler

Comparator Type Quad differential comparator
Number of Channels 4 channels
Çıkış Türü Open collector
Supply Voltage Range 2 V to 36 V
Maximum Supply Voltage 36 V
Supply Current Drain 0.8 mA typical
Input Bias Current Low input bias current
Differential Input Voltage Equal to maximum-rated supply voltage
Common-Mode Input Voltage Includes ground
Logic Compatibility Compatible with TTL, MOS, and CMOS
Paket 14-pin TSSOP
Montaj Türü Surface mount
Operating Configuration Single supply or split supply
Comparator Response Time 300 ns
Output Pull-Up Requirement External pull-up resistor required
RoHS Compliance Compliant

LM339APWRG4 Pin Yapısı

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT 1 — Open-collector output of comparator 1
Pin 2 IN 1- — Inverting input of comparator 1
Pin 3 IN 1+ — Non-inverting input of comparator 1
Pin 4 GND — Common ground connection
Pin 5 IN 2+ — Non-inverting input of comparator 2
Pin 6 IN 2- — Inverting input of comparator 2
Pin 7 OUT 2 — Open-collector output of comparator 2
Pin 8 OUT 3 — Open-collector output of comparator 3
Pin 9 IN 3+ — Non-inverting input of comparator 3
Pin 10 IN 3- — Inverting input of comparator 3
Pin 11 OUT 4 — Open-collector output of comparator 4
Pin 12 IN 4- — Inverting input of comparator 4
Pin 13 IN 4+ — Non-inverting input of comparator 4
Pin 14 VCC — Common positive supply connection

Tipik Uygulamalar

LM339APWRG4 için uygundur 6 uygulamas: Power-Rail Voltage Monitoring, Multi-Level Signal Detection, Battery Threshold Supervision, Zero-Crossing Detection, TTL and CMOS Logic Interface, Window and Over/Under Detection.

⚡

Power-Rail Voltage Monitoring

The LM339APWRG4 is appropriate for monitoring positive power rails against fixed or adjustable reference thresholds because its differential inputs operate with a common-mode range that includes ground. Each channel can supervise a separate rail, and the open-collector output can pull down a logic node through an external pull-up resistor. The 36 V maximum supply rating accommodates industrial systems while the 0.8 mA typical supply drain limits standing power. Add hysteresis around the switching point to prevent repeated alarm activity as the monitored rail moves near the threshold.

🧩

Multi-Level Signal Detection

Four independent comparator channels make the LM339APWRG4 useful for multi-level detection where analog signals must be converted into discrete logic states. Each channel can compare a sensor or divider output with its own threshold, while the shared package reduces the component count compared with separate single comparators. Because the outputs are open collector, pull-ups can be tied to the voltage required by a TTL, MOS, or CMOS receiver. Keep the input traces short and place the threshold resistors near the associated input pins.

🔋

Battery Threshold Supervision

The LM339APWRG4 can compare a divided battery voltage against precise thresholds for charge-state indication, low-battery alarms, or system cutoff control. The comparator's differential input arrangement supports ground-referenced sensing, while the wide supply range allows operation in systems above the voltage being monitored when adequate headroom exists. Use a stable reference for the threshold side of the comparison and add positive feedback for hysteresis. The open-collector output can directly pull down an enable, indicator, or isolation signal through a pull-up network.

📈

Zero-Crossing Detection

The LM339APWRG4 can detect the point at which an input waveform crosses a reference by placing the waveform and threshold on the two differential inputs. This is useful for AC-coupled timing, phase, and event-detection circuits where the input crosses a nominal zero or mid-supply reference. The 300 ns response time supports relatively fast threshold events, and the common-mode range including ground is advantageous for bipolar signals referenced to ground. Use hysteresis and careful return-path routing to avoid false triggering around the crossing point.

🖥️

TTL and CMOS Logic Interface

The open-collector output of the LM339APWRG4 allows a logic-family conversion when the pull-up resistor is connected to the receiving family's supply. This arrangement is useful when a low-voltage comparator section must drive TTL, MOS, or CMOS inputs with a different supply voltage. The output stage sinks the pull-up current when the comparison indicates the opposite state, while the resistor establishes the high level. Select the pull-up resistance to balance transition speed against power dissipation and confirm the output's allowable sink current in the manufacturer data sheet.

🏭

Window and Over/Under Detection

Two LM339APWRG4 channels can form a voltage window detector by comparing a monitored signal against upper and lower reference levels. Each open-collector output can pull a shared wired-AND node through its own pull-up, producing a fault signal when either limit is exceeded. This arrangement supports industrial limit detection, instrument protection, and automated test equipment. Reference resistors should have suitable tolerance and temperature stability, while the signal path should avoid proximity to switching converters to prevent false threshold crossings.

What is the operating voltage range of LM339APWRG4?
The LM339APWRG4 operates from 2 V to 36 V and can also be powered with positive and negative split supplies. According to the Texas Instruments LM339 product documentation, the A-version device supports a maximum-rated supply of 36 V, while its common-mode input range includes ground. This range makes the quad comparator suitable for low-voltage logic systems as well as higher-voltage industrial sensing circuits.
Where can I download the LM339APWRG4 datasheet PDF?
The LM339APWRG4 datasheet PDF is available through the Texas Instruments LM339A part-details page and through the LM339 product page. The manufacturer documentation identifies the device as a quad differential comparator with open-collector outputs and a maximum supply rating of 36 V. Use the manufacturer data sheet for the complete pin-description table, characteristic curves, and recommended operating conditions.
Where can I find the LM339APWRG4 pinout?
The LM339APWRG4 pinout is provided in the pin-description table of the Texas Instruments LM339A data sheet and corresponds to the standard 14-pin TSSOP comparator arrangement. The four comparator sections are distributed across the package, with supply and ground shared by all channels. When assigning PCB tracks, use the numbered pin table and symbol diagram in the manufacturer data sheet as the authoritative reference.
What are the key specifications of LM339APWRG4 that engineers should know?
The LM339APWRG4 is a four-channel differential comparator operating from 2 V to 36 V with open-collector outputs. Its important characteristics include a 0.8 mA typical supply-current drain, a 300 ns response time, a common-mode input range that includes ground, and compatibility with TTL, MOS, and CMOS logic. The device is packaged in a surface-mount 14-pin TSSOP.
What can replace the LM339APWRG4?
The closest drop-in choices are other 14-pin TSSOP variants built around the same LM339 comparator function, including LM339PWRG4, LM339PWRE4, LM339PWRG3, and LM339APWR. These parts preserve the quad differential comparator, open-collector output, and 14-pin TSSOP footprint. The LM2901PW offers another same-package option with the same 2 V to 36 V operating class, but device-specific timing and offset limits should be checked before substitution.
Is LM339APWRG4 the same as LM2901PW?
The LM339APWRG4 and LM2901PW are both four-channel comparators offered in a 14-pin TSSOP package for operation in the 2 V to 36 V class. Their shared package and general function make the LM2901PW a candidate for board-level substitution, but the devices are not guaranteed to be identical in every AC parameter, input offset, or temperature characteristic. Compare the specific parameters affected by the circuit before production use.
LM339APWRG4 vs LM339PWRG4 - which is better?
Both are 14-pin TSSOP quad differential comparators with open-collector outputs, so they are closely related options. The LM339PWRG4 belongs to the LM339P family described as sharing the same silicon die with related order codes, while LM339APWRG4 is the A-version ordering code. Choose the exact ordering code supported by your approved component list and verify its temperature and grade requirements.
When should I choose LM339APWRG4 instead of a dual comparator?
Choose the LM339APWRG4 when a design needs four independent differential comparisons in one package, such as multi-level monitoring or four-channel level detection. A dual comparator such as a 2-channel alternative is more appropriate when only two channels are required and reduces unused silicon and package size. The LM339APWRG4 is preferable when PCB area, shared supply routing, and four independent thresholds are more important than minimum channel count.
Can LM339APWRG4 replace a single comparator circuit?
The LM339APWRG4 can implement the function of one differential comparator, but it contains four independent comparators in one 14-pin TSSOP package. Unused channels should be configured according to the manufacturer recommendations rather than left floating. Replacing a discrete comparator with this quad device can reduce component count when several thresholds are required, but it may waste channels and space in a single-comparator design.
Why does the LM339APWRG4 output require a pull-up resistor?
The LM339APWRG4 has open-collector outputs that pull the output node toward ground but do not actively drive it high. An external pull-up resistor provides the high state and sets the output rise time together with input capacitance and board parasitics. Select the resistor to balance speed, power consumption, and the sink-current rating of the output stage, and place it close to the receiving logic input.
What is the best Texas Instruments equivalent for LM339APWRG4?
The most direct Texas Instruments alternatives are LM339PWRG4, LM339PWRE4, LM339PWRG3, and LM339APWR, each using the 14-pin TSSOP comparator configuration associated with the LM339 family. The availability records identify LM339PWRG4, LM339PWRE4, and LM339PWRG3 as sharing the same silicon die. Review the exact order-code, temperature-range, and qualification requirements before choosing a substitute.
How is the LM339APWRG4 used in a power-supply monitoring circuit?
A typical LM339APWRG4 monitoring circuit places a precise threshold at one comparator input and senses the power rail at the other input. The open-collector output then pulls down a pull-up node when the monitored rail crosses the threshold, allowing a supervisor, counter, or enable circuit to react. The comparator's ground-referenced common-mode range and 36 V maximum supply support industrial supervision, provided the signal levels remain within the specified operating conditions.
What applications are suitable for a four-channel open-collector comparator?
The LM339APWRG4 is suitable for level detection, window comparison, battery monitoring, zero-crossing detection, sensor signal conditioning, and TTL, MOS, or CMOS interface translation. Its open-collector outputs are especially useful when the driven circuit needs a pull-up voltage different from the comparator supply. Each of the four channels can also implement an independent threshold function while sharing one package.
Does the LM339APWRG4 operate from a single supply or split supplies?
The LM339APWRG4 supports both single-supply and split-supply operation. With one positive supply and ground, it compares signals within a range that includes ground, which is convenient for low-side sensing. With positive and negative rails, it can process signals around a zero-volt midpoint. The actual input limits must remain within the common-mode and differential ranges stated in the manufacturer data sheet.
Is LM339APWRG4 suitable for TTL and CMOS interfacing?
Yes, the open-collector LM339APWRG4 output is compatible with TTL, MOS, and CMOS logic when an appropriate external pull-up is used. The pull-up can be connected to the supply rail required by the receiving logic family, allowing the comparator to operate from a different voltage than the logic it drives. Check the pull-up current, output sink rating, and desired switching speed during layout and logic-level design.
How do I buy LM339APWRG4 and check its current lead time?
Use the Request a Quote form on this page to request LM339APWRG4 pricing, current stock status, minimum order quantity, and production lead time. The component is a 14-pin TSSOP quad comparator from Texas Instruments, so confirm the exact order code, quantity, and reel or tray packaging requested. A written manufacturer-authorized quotation provides the most reliable commercial terms for scheduled production.
What is the price of LM339APWRG4?
Pricing for the LM339APWRG4 depends on order quantity, packaging, market availability, and current supplier conditions. Use the Request a Quote form on this page for a quantity-specific quotation and current commercial terms. For production planning, also request the confirmed lead time and stock allocation so that procurement can be scheduled against the component's lifecycle status.
Is LM339APWRG4 currently in stock?
Current inventory for the LM339APWRG4 should be confirmed through the Request a Quote form on this page because stock levels and lead times change with market demand. The Texas Instruments LM339A family is presented as an active product offering, and the LM339APWRG4 has a 14-pin TSSOP order code. Submit the required quantity, target date, and packaging preference for an availability response.

Mühendislik referans verileri: LM339APWRG4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LM339APWRG4 when a design needs four ground-referenced threshold comparisons, a wide 2 V to 36 V operating range, and open-collector outputs that can drive TTL, MOS, or CMOS logic through external pull-ups. Select LM339PWRG4, LM339PWRE4, or LM339PWRG3 when those specific order codes align with the same-silicon-die LM339 family and your approved component list. LM339APWR is the closest alternate order code when the G4 suffix is not required. Consider LM2901PW for the same 14-pin TSSOP quad-comparator class and 2 V to 36 V range, but compare device-specific timing, input offset, and temperature limits before substitution. For designs needing only one or two comparisons, a lower-channel-count device may reduce unused silicon and board area.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM339PWRG4 LM339PWRE4 LM339PWRG3 LM339APWR LM2901PW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Comparator Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Supply Voltage Range 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V
Output Type Open collector Open collector Open collector Open collector Open collector Open collector
Response Time 300 ns 300 ns 300 ns 300 ns 300 ns 300 ns
Supply Configuration Single supply or split supply Single supply or split supply Single supply or split supply Single supply or split supply Single supply or split supply Single supply or split supply
Logic Compatibility TTL, MOS, and CMOS compatible with external pull-up TTL, MOS, and CMOS compatible with external pull-up TTL, MOS, and CMOS compatible with external pull-up TTL, MOS, and CMOS compatible with external pull-up TTL, MOS, and CMOS compatible with external pull-up TTL, MOS, and CMOS compatible with external pull-up
Silicon Die Relationship LM339A family device Same silicon die as related LM339P order codes Same silicon die as related LM339P order codes Same silicon die as related LM339P order codes Same LM339A configuration Related LM2901 comparator family
External Pull-Up Resistor Required Required Required Required Required Required

Ana Farklılayıcılar

  • Four independent differential channels in one 14-pin TSSOP package (karşılaştırma:LM2901PW)
  • Ground-inclusive common-mode input range (karşılaştırma:LM339PWRG4)
  • Logic-family flexibility from the open-collector stage (karşılaştırma:LM339APWR)

Tasarım Notları

Do not treat the open-collector output as a push-pull logic output. Every output requires a pull-up resistor, and the logic-high voltage is determined by the pull-up connection rather than by the comparator supply. Size the resistor to satisfy the receiver's input current, the output's sink-current limit, and the required rise time. Avoid leaving an output without a pull-up, because the resulting floating node can produce unreliable transitions.

Place each pull-up resistor close to the corresponding comparator output or receiving logic input to minimize the loop area that carries switching current. Route the two inputs of a comparator as a compact differential pair where possible, and connect the ground reference directly to the device ground pin rather than routing return current through an input trace. Keep comparator inputs away from inductors, switching nodes, and high-current power paths.

Add hysteresis with positive feedback when a monitored signal can cross the threshold slowly or contain noise. The feedback resistor raises the effective switching threshold as the output changes state, separating the turn-on and turn-off points. Keep the hysteresis network values small enough not to load the input source, and verify that the resulting trip points account for input offset, reference tolerance, and temperature variation.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS compliance is documented for the LM339APWRG4. The component is a general-purpose industrial comparator, so AEC-Q100 automotive qualification does not apply. REACH, halogen-free, lead-free, and conflict-minerals status require confirmation for the exact order code.

İlgili Aramalar

LM339APWRG4 datasheet LM339APWRG4 pinout LM339APWRG4 datasheet pdf LM339APWRG4 equivalent LM339APWRG4 replacement LM339APWRG4 cross reference LM339APWRG4 vs LM2901PW LM339APWRG4 14-TSSOP LM339APWRG4 open collector output LM339APWRG4 power supply monitoring LM339APWRG4 price LM339APWRG4 stock Texas Instruments LM339APWRG4 LM339APWRG4 application circuit LM339APWRG4 pull-up resistor

İlgili Bileşenler ve Terimler

Texas Instruments LM339APWRG4 LM339A LM339PWRG4 LM339PWRE4 LM339PWRG3 LM339APWR LM2901PW quad differential comparator analog comparator signal conditioning open-collector output external pull-up resistor single-supply operation split-supply operation common-mode input voltage differential input voltage 14-pin TSSOP TSSOP package family surface-mount package TTL compatibility MOS compatibility CMOS compatibility RoHS industrial control
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle