LPC11U68JBD48E - 50MHz Cortex-M0+ MCU | NXP
MPN: LPC11U68JBD48E ✓ AktifLPC11U68JBD48E Genel Bakış
An ARM Cortex-M0+ microcontroller is a reduced-instruction-set processor used to manage sensors, communications, actuators, and human-machine interfaces. The M0+ architecture combines an Arm processing core with deterministic embedded control, while flash memory stores firmware and RAM supports working data. Within the product hierarchy, the LPC11U68JBD48E is an MCU, an embedded processing IC, and a member of NXP's LPC11Uxx family.
Key device characteristics include a 50 MHz maximum CPU frequency, 256 KB flash, 36 KB RAM, and operation from a 3.3 V supply as listed for the exact device. The 48-LQFP package provides a conventional leaded surface-mount footprint and is easier to inspect than a very fine-pitch package. The manufacturer lists LPC11U68JBD48 as active, while the LPC11U68JBD48E ordering code identifies the extended-temperature variant.
The device's combination of 32-bit processing, substantial embedded memory, and a 50 MHz clock is useful for protocol handling, digital control, data acquisition, and connected peripherals. Its compact instruction set supports compact firmware while retaining the software ecosystem associated with Arm Cortex-M processors. Developers can use the same core architecture as a common platform element across sensors, communications modules, and industrial control products.
Typical uses include industrial monitoring, building-control endpoints, low-cost connectivity modules, sensor nodes, and compact consumer accessories. A 3.3 V operating supply simplifies integration with common embedded peripherals, while 256 KB of flash provides room for application code, configuration data, and boot routines. The 36 KB RAM supports buffering and real-time state management without requiring an external memory device.
Designers should verify the complete pin description, clock requirements, power sequencing, and peripheral multiplexing in the NXP datasheet before layout release. The 48-pin LQFP footprint should be checked against the exact E suffix ordering code, and firmware should be built against the matching LPC11Uxx device configuration. Temperature limits, decoupling, and programming-test requirements should also follow the manufacturer guidance for the selected package variant.
This product page combines the exact orderable MPN, core and memory specifications, package details, application guidance, design notes, and technically constrained replacement candidates. It is intended to help engineers move from part selection to schematic review and PCB implementation while preserving the distinction between confirmed specifications and parameters that require design verification.
Drop-in alternatifler için LPC11U68JBD48E — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LPC11U68JBD48E (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Architecture, Core Architecture, Flash Memory.
LPC11E67JBD48E
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LPC11E68JBD48E
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LPC11U68JBD48E Maksimum Değerlendirmeler & Elektriksel Özellikler
| Manufacturer | NXP Semiconductors |
| Product Type | 32-bit microcontroller (MCU) |
| CPU Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz |
| Flash Program Memory | 256 KB |
| RAM | 36 KB |
| İşletim Besleme Gerilimi | 3.3 V |
| Architecture | 32-bit RISC |
| Paket | 48-pin LQFP (7 mm x 7 mm) |
| Montaj Türü | Surface Mount |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +105 °C |
| Yaşam Döngüsü Durumu | Active |
| Shipping Format | Tray |
| Core Family | LPC11Uxx |
| Veri Bus Genişliği | 32-bit |
LPC11U68JBD48E 48-pin lqfp (7 mm x 7 mm) Pin Yapısı Kılavuzu
LPC11U68JBD48E (48-pin lqfp (7 mm x 7 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LPC11U68JBD48E.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LPC11U68JBD48E için uygundur 6 uygulamas: Industrial Sensor Node, Building Control Endpoint, Communication Gateway, Portable Data Logger, Smart Home Controller, Compact Consumer Accessory.
Industrial Sensor Node
The LPC11U68JBD48E fits an industrial sensor node that must acquire measurements, apply local filtering, and communicate results through a serial or network interface. Its 50 MHz ARM Cortex-M0+ core provides more headroom than a basic 8-bit control loop, while 256 KB of flash accommodates drivers, protocol stacks, and configuration data. The 36 KB RAM supports sample buffers and communication state without an external memory device. Its -40 °C to +105 °C rating supports industrial temperature targets, although the final assembly must also satisfy humidity, vibration, and isolation requirements. Use a regulated 3.3 V supply and follow the manufacturer decoupling and grounding guidance.
Önerilen
Building Control Endpoint
The LPC11U68JBD48E can serve as the local controller in a building-control endpoint handling switch inputs, relay outputs, environmental sensing, and communications to a supervisory controller. The 32-bit Cortex-M0+ architecture supports multitasking or event-driven firmware, and the 256 KB flash provides sufficient room for protocol handling and configuration logic. Its 36 KB RAM is useful for maintaining schedules, counters, and communication buffers. The 3.3 V supply aligns with many low-power building electronics, while the 48-LQFP footprint simplifies assembly where a fine-pitch package would be inconvenient. Validate the digital input thresholds, relay-driver isolation, watchdog behavior, and fail-safe requirements in the final design.
Önerilen
Communication Gateway
The LPC11U68JBD48E is appropriate for a small serial gateway that translates data between a local sensor bus and a higher-level network interface. Its 50 MHz Cortex-M0+ core can service protocol state machines and buffering, while 256 KB of flash can hold communication firmware and field-upgrade logic. The 36 KB RAM supports concurrent receive and transmit queues without relying on external SRAM. The 48-pin LQFP package leaves access to a broad pin count for UART, SPI, and other interface assignments, subject to the exact alternate-function map. Design the communications interface for voltage levels, termination, isolation, and protocol timing rather than assuming compatibility with another LPC family member.
Önerilen
Portable Data Logger
The LPC11U68JBD48E can serve as the control core of a portable data logger that stores sensor readings and periodically transfers them to a host. Its 256 KB of internal flash provides space for firmware, event logs, and calibration information, while 36 KB of RAM supports working buffers during acquisition. The 32-bit architecture eases the use of structured data formats and cryptographic or checksum routines compared with an 8-bit processor. Operating at 3.3 V helps with compact battery-powered designs, but average current depends on the selected clock, peripheral activity, and sleep strategy. Confirm retention behavior, write endurance, low-power modes, and regulator efficiency from the manufacturer documentation before defining the storage scheme.
Önerilen
Smart Home Controller
The LPC11U68JBD48E is suitable for a smart-home controller that coordinates switches, sensors, indicators, and a low-speed communications link. The 50 MHz Cortex-M0+ core allows responsive event handling and compact firmware, while the 256 KB flash and 36 KB RAM avoid an external memory requirement for moderate application complexity. Its 48-LQFP package is practical for moderate-density boards that favor inspection and reworkability. A 3.3 V system architecture simplifies integration with common digital peripherals. The designer should still account for ESD protection on externally accessible connectors, relay transients, debounce timing, firmware update security, and the difference between a reset requirement and the device's documented low-power capabilities.
Önerilen
Compact Consumer Accessory
The LPC11U68JBD48E can control compact consumer accessories that combine a few inputs, an indicator or actuator, and a serial connection to a phone or host device. Its 32-bit Cortex-M0+ architecture provides an efficient platform for protocol handling and control logic, and its integrated 256 KB flash supports a complete application without external program storage. The 36 KB RAM is sufficient for short message buffers and application state. The 3.3 V supply and 7 mm by 7 mm LQFP package support compact but manufacturable assemblies. Validate the accessory's regulatory, ESD, brownout, standby-current, and connector requirements, because processor selection alone does not establish product compliance.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LPC11U68JBD48E — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LPC11E67JBD48E | LPC11E68JBD48E |
|---|---|---|---|
| Manufacturer | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) |
| Product Type | 32-bit ARM Cortex-M0+ microcontroller | 32-bit microcontroller | 32-bit microcontroller |
Ana Farklılayıcılar
- Exact LPC11U68 ordering identity (karşılaştırma:LPC11E68JBD48E)
- Broad industrial temperature coverage (karşılaştırma:LPC11E67JBD48E)
- Established exact-package ordering option (karşılaştırma:LPC11E67JBD48E)
Tasarım Notları
Create the PCB footprint from the NXP LPC11U68 package drawing associated with the exact 48-LQFP ordering code. Confirm body size, lead pitch, pin-1 position, toe and heel geometry, and any exposed-pad connection rather than scaling a generic LQFP symbol. Reserve clean return paths for all supply and ground pins, and place required decoupling capacitors at the associated pins with short traces.
Design the 3.3 V rail around the controller's actual load, startup behavior, and peripheral current rather than the maximum clock frequency alone. Account for the peak current drawn during analog, communications, or flash activity and for voltage droop during wake-up. Use a regulator with suitable transient response and verify brownout behavior, power-on reset timing, and decoupling against the manufacturer's electrical characteristics.
Separate sensitive analog or timing-sensitive routes from fast digital switching and clocks. Provide a continuous ground reference beneath the device where the package construction permits, keep switching-current loops compact, and route external communications or sensor inputs away from noisy supply and clock traces. Review every multiplexed pin against the intended peripheral function because alternate functions can differ within the LPC11 family.
Do not assume that similar LPC11 orderable suffixes are firmware-compatible. LPC11U68JBD48E, LPC11E67JBD48E, and LPC11E68JBD48E must be checked for peripheral identity, clock configuration, interrupt mapping, pin multiplexing, memory organization, and development-tool support. Rebuild the image for the selected device and perform boundary tests on timers, communications, analog functions, and reset behavior before approving a replacement.
Uyumluluk Bilgisi
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact orderable MPN.