NXP Semiconductors

LPC11U68JBD48E - 50MHz Cortex-M0+ MCU | NXP

料号: LPC11U68JBD48E ✓ 量产中
3.3 V Vdss 48-pin LQFP (7 mm x 7 mm) Package 50 MHz Speed 256 KB Memory
最小起订量: 1 |

LPC11U68JBD48E 概述

The NXP Semiconductors LPC11U68JBD48E is an active 32-bit ARM Cortex-M0+ microcontroller operating at up to 50 MHz, with 256 KB of flash program memory and 36 KB of RAM in a 48-pin LQFP package measuring 7 mm by 7 mm. It is designed for compact embedded systems that need efficient control processing, flexible peripherals, and a low-cost general-purpose architecture.

An ARM Cortex-M0+ microcontroller is a reduced-instruction-set processor used to manage sensors, communications, actuators, and human-machine interfaces. The M0+ architecture combines an Arm processing core with deterministic embedded control, while flash memory stores firmware and RAM supports working data. Within the product hierarchy, the LPC11U68JBD48E is an MCU, an embedded processing IC, and a member of NXP's LPC11Uxx family.

Key device characteristics include a 50 MHz maximum CPU frequency, 256 KB flash, 36 KB RAM, and operation from a 3.3 V supply as listed for the exact device. The 48-LQFP package provides a conventional leaded surface-mount footprint and is easier to inspect than a very fine-pitch package. The manufacturer lists LPC11U68JBD48 as active, while the LPC11U68JBD48E ordering code identifies the extended-temperature variant.

The device's combination of 32-bit processing, substantial embedded memory, and a 50 MHz clock is useful for protocol handling, digital control, data acquisition, and connected peripherals. Its compact instruction set supports compact firmware while retaining the software ecosystem associated with Arm Cortex-M processors. Developers can use the same core architecture as a common platform element across sensors, communications modules, and industrial control products.

Typical uses include industrial monitoring, building-control endpoints, low-cost connectivity modules, sensor nodes, and compact consumer accessories. A 3.3 V operating supply simplifies integration with common embedded peripherals, while 256 KB of flash provides room for application code, configuration data, and boot routines. The 36 KB RAM supports buffering and real-time state management without requiring an external memory device.

Designers should verify the complete pin description, clock requirements, power sequencing, and peripheral multiplexing in the NXP datasheet before layout release. The 48-pin LQFP footprint should be checked against the exact E suffix ordering code, and firmware should be built against the matching LPC11Uxx device configuration. Temperature limits, decoupling, and programming-test requirements should also follow the manufacturer guidance for the selected package variant.

This product page combines the exact orderable MPN, core and memory specifications, package details, application guidance, design notes, and technically constrained replacement candidates. It is intended to help engineers move from part selection to schematic review and PCB implementation while preserving the distinction between confirmed specifications and parameters that require design verification.

直接替换替代料: LPC11U68JBD48E ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LPC11U68JBD48E (相同外形与封装尺寸) ——差异在于 Package, Product Type, Architecture, Core Architecture, Flash Memory.

NXP Semiconductors
Package: 48-LQFP (7x7 mm)
Product Type: 32-bit ARM Microcontroller (MCU)
Core Architecture: ARM Cortex-M0+
对比 LPC11U68JBD48E →
NXP Semiconductors
Package: 48-LQFP (7 x 7 mm)
Product Type: 32-bit microcontroller
Core Architecture: Arm Cortex-M0+/M0
对比 LPC11U68JBD48E →
NXP Semiconductors
Package: 48-pin LQFP, 7 x 7 mm
Architecture: 32-bit
Flash Memory: 64 KB (64K x 8)
对比 LPC11U68JBD48E →

LPC11E67JBD48E

✅ 直接替换
NXP Semiconductors
📦 48-LQFP (7 mm x 7 mm)
32-bit microcontroller (MCU) · Arm Cortex-M0+ · 50 MHz · 128 KB (128K x 8 bits) · 128K x 8 bits · 48-LQFP (7 mm x 7 mm) · 32-bit · LPC11Exx

联系询价

查看数据手册 →

LPC11E68JBD48E

✅ 直接替换
NXP Semiconductors
📦 48-LQFP (7 mm x 7 mm)
32-bit microcontroller · Arm Cortex-M0+ · 50 MHz · 32 bit · 256 KB · 256K x 8 · 36 KB · 48-LQFP (7 x 7 mm)

联系询价

查看数据手册 →

LPC11U68JBD48E 最大额定值与电气特性

Manufacturer NXP Semiconductors
Product Type 32-bit microcontroller (MCU)
CPU Core ARM Cortex-M0+
Maximum CPU Frequency 50 MHz
Flash Program Memory 256 KB
RAM 36 KB
工作电源电压 3.3 V
Architecture 32-bit RISC
封装 48-pin LQFP (7 mm x 7 mm)
安装类型 Surface Mount
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +105 °C
生命周期状态 Active
Shipping Format Tray
Core Family LPC11Uxx
数据总线宽度 32-bit

LPC11U68JBD48E 48-pin lqfp (7 mm x 7 mm) 引脚配置指南

LPC11U68JBD48E(48-pin lqfp (7 mm x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

LPC11U68JBD48E 的 48-pin lqfp (7 mm x 7 mm) 封装引脚图

暂无详细引脚数据: LPC11U68JBD48E.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LPC11U68JBD48E 适用于 6 应用s: Industrial Sensor Node, Building Control Endpoint, Communication Gateway, Portable Data Logger, Smart Home Controller, Compact Consumer Accessory.

🏭

Industrial Sensor Node

The LPC11U68JBD48E fits an industrial sensor node that must acquire measurements, apply local filtering, and communicate results through a serial or network interface. Its 50 MHz ARM Cortex-M0+ core provides more headroom than a basic 8-bit control loop, while 256 KB of flash accommodates drivers, protocol stacks, and configuration data. The 36 KB RAM supports sample buffers and communication state without an external memory device. Its -40 °C to +105 °C rating supports industrial temperature targets, although the final assembly must also satisfy humidity, vibration, and isolation requirements. Use a regulated 3.3 V supply and follow the manufacturer decoupling and grounding guidance.

🏭

Building Control Endpoint

The LPC11U68JBD48E can serve as the local controller in a building-control endpoint handling switch inputs, relay outputs, environmental sensing, and communications to a supervisory controller. The 32-bit Cortex-M0+ architecture supports multitasking or event-driven firmware, and the 256 KB flash provides sufficient room for protocol handling and configuration logic. Its 36 KB RAM is useful for maintaining schedules, counters, and communication buffers. The 3.3 V supply aligns with many low-power building electronics, while the 48-LQFP footprint simplifies assembly where a fine-pitch package would be inconvenient. Validate the digital input thresholds, relay-driver isolation, watchdog behavior, and fail-safe requirements in the final design.

🌐

Communication Gateway

The LPC11U68JBD48E is appropriate for a small serial gateway that translates data between a local sensor bus and a higher-level network interface. Its 50 MHz Cortex-M0+ core can service protocol state machines and buffering, while 256 KB of flash can hold communication firmware and field-upgrade logic. The 36 KB RAM supports concurrent receive and transmit queues without relying on external SRAM. The 48-pin LQFP package leaves access to a broad pin count for UART, SPI, and other interface assignments, subject to the exact alternate-function map. Design the communications interface for voltage levels, termination, isolation, and protocol timing rather than assuming compatibility with another LPC family member.

📱

Portable Data Logger

The LPC11U68JBD48E can serve as the control core of a portable data logger that stores sensor readings and periodically transfers them to a host. Its 256 KB of internal flash provides space for firmware, event logs, and calibration information, while 36 KB of RAM supports working buffers during acquisition. The 32-bit architecture eases the use of structured data formats and cryptographic or checksum routines compared with an 8-bit processor. Operating at 3.3 V helps with compact battery-powered designs, but average current depends on the selected clock, peripheral activity, and sleep strategy. Confirm retention behavior, write endurance, low-power modes, and regulator efficiency from the manufacturer documentation before defining the storage scheme.

🧩

Smart Home Controller

The LPC11U68JBD48E is suitable for a smart-home controller that coordinates switches, sensors, indicators, and a low-speed communications link. The 50 MHz Cortex-M0+ core allows responsive event handling and compact firmware, while the 256 KB flash and 36 KB RAM avoid an external memory requirement for moderate application complexity. Its 48-LQFP package is practical for moderate-density boards that favor inspection and reworkability. A 3.3 V system architecture simplifies integration with common digital peripherals. The designer should still account for ESD protection on externally accessible connectors, relay transients, debounce timing, firmware update security, and the difference between a reset requirement and the device's documented low-power capabilities.

🔧

Compact Consumer Accessory

The LPC11U68JBD48E can control compact consumer accessories that combine a few inputs, an indicator or actuator, and a serial connection to a phone or host device. Its 32-bit Cortex-M0+ architecture provides an efficient platform for protocol handling and control logic, and its integrated 256 KB flash supports a complete application without external program storage. The 36 KB RAM is sufficient for short message buffers and application state. The 3.3 V supply and 7 mm by 7 mm LQFP package support compact but manufacturable assemblies. Validate the accessory's regulatory, ESD, brownout, standby-current, and connector requirements, because processor selection alone does not establish product compliance.

What are the key specifications of LPC11U68JBD48E?
The LPC11U68JBD48E is a 32-bit ARM Cortex-M0+ microcontroller rated for operation up to 50 MHz, with 256 KB of flash program memory and 36 KB of RAM. It operates from 3.3 V and is packaged in a 48-pin, 7 mm by 7 mm LQFP. According to the NXP product-page information and the exact-device distributor listing, it belongs to the LPC11Uxx family and provides sufficient memory for embedded control, communications, and sensor-processing firmware.
What is the LPC11U68JBD48E used for?
The LPC11U68JBD48E is used for compact embedded control tasks that combine 32-bit processing with on-chip flash and RAM. Its 50 MHz ARM Cortex-M0+ core and 256 KB of flash suit industrial monitoring, sensor nodes, communications endpoints, and building-control products. According to the NXP LPC11Uxx family description, the MCU family targets cost-sensitive replacements for 8-bit and 16-bit designs while retaining a simple, efficient instruction set.
What is the difference between LPC11U68JBD48E and LPC11U68JBD48?
LPC11U68JBD48E is the orderable suffix used for the E-grade LPC11U68JBD48 device, and NXP lists LPC11U68JBD48 as active. The available product information identifies the E ordering code as a 50 MHz ARM Cortex-M0+ MCU with 256 KB of flash in a 48-LQFP package. Additional grade-specific distinctions must be confirmed against the manufacturer's ordering-information table before production release.
How much flash and RAM does LPC11U68JBD48E have?
The LPC11U68JBD48E has 256 KB of flash program memory and 36 KB of RAM. According to the NXP product listing and the exact-device component listing, these resources support an embedded application without requiring external program memory. Flash can hold firmware, configuration, and boot code, while the 36 KB RAM provides working space for stack, buffers, protocol state, and application variables.
What is the operating voltage of LPC11U68JBD48E?
The LPC11U68JBD48E is listed at 3.3 V operating supply voltage. The device also operates across an industrial temperature range of -40 °C to +105 °C. According to the exact-device product listing, the E suffix denotes the broader-temperature ordering variant. Confirm regulator tolerances, I/O levels, and power-sequencing limits in the NXP datasheet before connecting external circuitry.
What package does LPC11U68JBD48E use?
The LPC11U68JBD48E uses a 48-pin LQFP package measuring 7 mm by 7 mm. According to the exact-part listing, it is supplied in tray format for this orderable configuration. The footprint supports a conventional lead pitch, but the PCB land pattern, pin-1 orientation, exposed pad status, and soldering profile must be copied from the manufacturer package drawing rather than inferred from the family name.
Where can I download the LPC11U68JBD48E datasheet?
Download the LPC11U68JBD48E documentation from the NXP product page linked on this page. The manufacturer's LPC11U68JBD48 product page provides the current data-sheet and supporting documentation for the LPC11U68 family, while the exact E suffix and 48-LQFP ordering details should be checked in the datasheet and ordering-information sections. Use those documents for pinout, clocks, memory map, and electrical limits.
Where can I find the LPC11U68JBD48E pinout?
The LPC11U68JBD48E pinout is located in the pin-description and package-drawing sections of the NXP LPC11U68 documentation. The exact device is a 48-pin LQFP, but its complete numbered signal list is not reproduced on this page to avoid transcription errors. Assign PCB nets directly from the manufacturer pin table and cross-check pin 1, power pins, ground pins, and alternate-function assignments before fabrication.
Is LPC11U68JBD48E suitable for industrial sensor nodes?
The LPC11U68JBD48E is suitable for many industrial sensor-node designs because it combines a 50 MHz 32-bit Cortex-M0+ core, 256 KB of flash, 36 KB of RAM, and a -40 °C to +105 °C temperature range. Its 3.3 V operation also aligns with many compact sensing systems. Environmental suitability still depends on the enclosure, power source, humidity exposure, electromagnetic environment, and product-specific qualification requirements.
Can LPC11E68JBD48E replace LPC11U68JBD48E?
LPC11E68JBD48E is a same-package comparison candidate, but it should not be treated as a confirmed drop-in replacement without reviewing the NXP device documentation. The candidate comparison covers the LPC11U68JBD48E and LPC11E68JBD48E directly, yet no explicit cross-reference statement confirms identical peripheral mapping, clock topology, and firmware compatibility. Validate the pin table, memory map, converter characteristics, and application behavior before substitution.
What is the best drop-in replacement for LPC11U68JBD48E?
No unconditional drop-in replacement is established for the LPC11U68JBD48E in the available cross-reference results. LPC11E67JBD48E and LPC11E68JBD48E are same-brand, same-package candidates worth reviewing, but the available material does not prove pin-for-pin functional equivalence. A valid replacement must match the LQFP-48 footprint, power pins, analog and digital functions, clocking, memory map, and firmware assumptions.
LPC11U68JBD48E vs LPC11E68JBD48E - which is better for a new design?
LPC11U68JBD48E is preferable when the design is intentionally based on the LPC11U68 family and its documented peripheral configuration. LPC11E68JBD48E may suit a different project architecture, but the two devices should not be selected solely from their similar 48-pin package names. Compare the Cortex core behavior, analog peripherals, timers, serial interfaces, memory organization, clock tree, and package drawing using NXP documentation.
When should I choose LPC11U68JBD48E over LPC11E68JBD48E?
Choose LPC11U68JBD48E when its documented LPC11U68 peripheral map, timing behavior, and device support align with an established firmware platform. The device provides 50 MHz operation, 256 KB of flash, and 36 KB of RAM in a 48-LQFP package. Select the LPC11E68JBD48E only after confirming its complete electrical and pin compatibility with the intended board and rebuilding or validating firmware for its device configuration.
Where can I buy LPC11U68JBD48E online?
Use the Request a Quote form on this page to request LPC11U68JBD48E availability, lot conditions, and an order quotation. The manufacturer lists LPC11U68JBD48 as active, and the exact E suffix is offered in 3.3 V, 50 MHz, 256 KB flash, 48-LQFP tray configuration. Provide the required quantity, permitted date code, and target manufacturing location with the request for a precise response.
What is the price and lead time of LPC11U68JBD48E?
Submit the LPC11U68JBD48E Request a Quote form on this page for current commercial terms, including unit pricing, quantity breaks, stock position, and production lead time. The manufacturer identifies the LPC11U68JBD48 family as active, and the exact E suffix is listed in tray packaging. Include your order quantity, schedule, and any lot-traceability requirement so the quotation reflects the intended procurement plan.

工程参考数据: LPC11U68JBD48E ——对比、设计指导和合规信息。

选型指南

Choose the LPC11U68JBD48E when the product requires a 50 MHz ARM Cortex-M0+ controller with 256 KB of flash, 36 KB of RAM, 3.3 V operation, and a 48-LQFP footprint. It is particularly suitable for industrial, building-control, communications, and data-logging products that benefit from 32-bit processing without a large system-on-chip package. LPC11E68JBD48E and LPC11E67JBD48E share the broad MCU and package class, but similar naming does not establish identical behavior. Consider either only after reviewing the pin table, clock system, analog blocks, timers, serial interfaces, memory map, and device-specific firmware support. For a new design, favor the LPC11U68JBD48E when its documented family behavior matches the architecture already selected. For an established PCB, confirm every pin and electrical parameter before approving either alternative as a substitution.

与替代料对比

参数 本产品 LPC11E67JBD48E LPC11E68JBD48E
Manufacturer NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Product Type 32-bit ARM Cortex-M0+ microcontroller 32-bit microcontroller 32-bit microcontroller

关键差异点

  • Exact LPC11U68 ordering identity (对比 LPC11E68JBD48E)
  • Broad industrial temperature coverage (对比 LPC11E67JBD48E)
  • Established exact-package ordering option (对比 LPC11E67JBD48E)

设计说明

Create the PCB footprint from the NXP LPC11U68 package drawing associated with the exact 48-LQFP ordering code. Confirm body size, lead pitch, pin-1 position, toe and heel geometry, and any exposed-pad connection rather than scaling a generic LQFP symbol. Reserve clean return paths for all supply and ground pins, and place required decoupling capacitors at the associated pins with short traces.

Design the 3.3 V rail around the controller's actual load, startup behavior, and peripheral current rather than the maximum clock frequency alone. Account for the peak current drawn during analog, communications, or flash activity and for voltage droop during wake-up. Use a regulator with suitable transient response and verify brownout behavior, power-on reset timing, and decoupling against the manufacturer's electrical characteristics.

Separate sensitive analog or timing-sensitive routes from fast digital switching and clocks. Provide a continuous ground reference beneath the device where the package construction permits, keep switching-current loops compact, and route external communications or sensor inputs away from noisy supply and clock traces. Review every multiplexed pin against the intended peripheral function because alternate functions can differ within the LPC11 family.

Do not assume that similar LPC11 orderable suffixes are firmware-compatible. LPC11U68JBD48E, LPC11E67JBD48E, and LPC11E68JBD48E must be checked for peripheral identity, clock configuration, interrupt mapping, pin multiplexing, memory organization, and development-tool support. Rebuild the image for the selected device and perform boundary tests on timers, communications, analog functions, and reset behavior before approving a replacement.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact orderable MPN.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LPC11U68JBD48E datasheet LPC11U68JBD48E pinout LPC11U68JBD48E datasheet pdf LPC11U68JBD48E equivalent LPC11U68JBD48E replacement LPC11U68JBD48E cross reference LPC11U68JBD48E footprint LPC11U68JBD48E price LPC11U68JBD48E stock NXP LPC11U68JBD48E LPC11U68JBD48E vs LPC11E68JBD48E LPC11U68JBD48E application circuit

相关元器件 & 术语

NXP Semiconductors LPC11U68JBD48E LPC11U68JBD48 LPC11E67JBD48E LPC11E68JBD48E LPC11Uxx ARM Cortex-M0+ 32-bit microcontroller MCU embedded processor semiconductor reduced instruction set computer RISC flash memory 256 KB flash 36 KB RAM 50 MHz 3.3 V 48-LQFP LQFP family surface-mount package industrial sensor node building control communication gateway embedded data logging
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情