NXP Semiconductors

LPC11U68JBD48E - 50MHz Cortex-M0+ MCU | NXP

MPN: LPC11U68JBD48E ✓ Hoạt động
3.3 V Vdss 48-pin LQFP (7 mm x 7 mm) Package 50 MHz Speed 256 KB Memory
MOQ: 1 |

LPC11U68JBD48E Tóm tắt

The NXP Semiconductors LPC11U68JBD48E is an active 32-bit ARM Cortex-M0+ microcontroller operating at up to 50 MHz, with 256 KB of flash program memory and 36 KB of RAM in a 48-pin LQFP package measuring 7 mm by 7 mm. It is designed for compact embedded systems that need efficient control processing, flexible peripherals, and a low-cost general-purpose architecture.

An ARM Cortex-M0+ microcontroller is a reduced-instruction-set processor used to manage sensors, communications, actuators, and human-machine interfaces. The M0+ architecture combines an Arm processing core with deterministic embedded control, while flash memory stores firmware and RAM supports working data. Within the product hierarchy, the LPC11U68JBD48E is an MCU, an embedded processing IC, and a member of NXP's LPC11Uxx family.

Key device characteristics include a 50 MHz maximum CPU frequency, 256 KB flash, 36 KB RAM, and operation from a 3.3 V supply as listed for the exact device. The 48-LQFP package provides a conventional leaded surface-mount footprint and is easier to inspect than a very fine-pitch package. The manufacturer lists LPC11U68JBD48 as active, while the LPC11U68JBD48E ordering code identifies the extended-temperature variant.

The device's combination of 32-bit processing, substantial embedded memory, and a 50 MHz clock is useful for protocol handling, digital control, data acquisition, and connected peripherals. Its compact instruction set supports compact firmware while retaining the software ecosystem associated with Arm Cortex-M processors. Developers can use the same core architecture as a common platform element across sensors, communications modules, and industrial control products.

Typical uses include industrial monitoring, building-control endpoints, low-cost connectivity modules, sensor nodes, and compact consumer accessories. A 3.3 V operating supply simplifies integration with common embedded peripherals, while 256 KB of flash provides room for application code, configuration data, and boot routines. The 36 KB RAM supports buffering and real-time state management without requiring an external memory device.

Designers should verify the complete pin description, clock requirements, power sequencing, and peripheral multiplexing in the NXP datasheet before layout release. The 48-pin LQFP footprint should be checked against the exact E suffix ordering code, and firmware should be built against the matching LPC11Uxx device configuration. Temperature limits, decoupling, and programming-test requirements should also follow the manufacturer guidance for the selected package variant.

This product page combines the exact orderable MPN, core and memory specifications, package details, application guidance, design notes, and technically constrained replacement candidates. It is intended to help engineers move from part selection to schematic review and PCB implementation while preserving the distinction between confirmed specifications and parameters that require design verification.

Bộ thay thế dễ dàng lắp đặt cho LPC11U68JBD48E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LPC11U68JBD48E (cùng hình factor và footprint) — khác nhau ở Package, Product Type, Architecture, Core Architecture, Flash Memory.

NXP Semiconductors
Package: 48-LQFP (7x7 mm)
Product Type: 32-bit ARM Microcontroller (MCU)
Core Architecture: ARM Cortex-M0+
So sánh với LPC11U68JBD48E →
NXP Semiconductors
Package: 48-LQFP (7 x 7 mm)
Product Type: 32-bit microcontroller
Core Architecture: Arm Cortex-M0+/M0
So sánh với LPC11U68JBD48E →
NXP Semiconductors
Package: 48-pin LQFP, 7 x 7 mm
Architecture: 32-bit
Flash Memory: 64 KB (64K x 8)
So sánh với LPC11U68JBD48E →

LPC11E67JBD48E

✅ Drop-In
NXP Semiconductors
📦 48-LQFP (7 mm x 7 mm)
32-bit microcontroller (MCU) · Arm Cortex-M0+ · 50 MHz · 128 KB (128K x 8 bits) · 128K x 8 bits · 48-LQFP (7 mm x 7 mm) · 32-bit · LPC11Exx

Liên hệ để biết giá

Xem tài liệu →

LPC11E68JBD48E

✅ Drop-In
NXP Semiconductors
📦 48-LQFP (7 mm x 7 mm)
32-bit microcontroller · Arm Cortex-M0+ · 50 MHz · 32 bit · 256 KB · 256K x 8 · 36 KB · 48-LQFP (7 x 7 mm)

Liên hệ để biết giá

Xem tài liệu →

LPC11U68JBD48E Tỷ lệ tối đa & tính chất điện

Manufacturer NXP Semiconductors
Product Type 32-bit microcontroller (MCU)
CPU Core ARM Cortex-M0+
Maximum CPU Frequency 50 MHz
Flash Program Memory 256 KB
RAM 36 KB
Điện áp cung cấp hoạt động 3.3 V
Architecture 32-bit RISC
Hộp 48-pin LQFP (7 mm x 7 mm)
Kiểu lắp đặt Surface Mount
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +105 °C
Trạng thái vòng đời Active
Shipping Format Tray
Core Family LPC11Uxx
Bề rộng đường dữ liệu 32-bit

Hướng dẫn cấu hình chân LPC11U68JBD48E 48-pin lqfp (7 mm x 7 mm)

Cấu hình chân cho LPC11U68JBD48E (48-pin lqfp (7 mm x 7 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 48-pin lqfp (7 mm x 7 mm) cho LPC11U68JBD48E

Không có dữ liệu chân cụ thể sẵn có cho LPC11U68JBD48E.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LPC11U68JBD48E phù hợp cho 6 Áp dụngs: Industrial Sensor Node, Building Control Endpoint, Communication Gateway, Portable Data Logger, Smart Home Controller, Compact Consumer Accessory.

🏭

Industrial Sensor Node

The LPC11U68JBD48E fits an industrial sensor node that must acquire measurements, apply local filtering, and communicate results through a serial or network interface. Its 50 MHz ARM Cortex-M0+ core provides more headroom than a basic 8-bit control loop, while 256 KB of flash accommodates drivers, protocol stacks, and configuration data. The 36 KB RAM supports sample buffers and communication state without an external memory device. Its -40 °C to +105 °C rating supports industrial temperature targets, although the final assembly must also satisfy humidity, vibration, and isolation requirements. Use a regulated 3.3 V supply and follow the manufacturer decoupling and grounding guidance.

🏭

Building Control Endpoint

The LPC11U68JBD48E can serve as the local controller in a building-control endpoint handling switch inputs, relay outputs, environmental sensing, and communications to a supervisory controller. The 32-bit Cortex-M0+ architecture supports multitasking or event-driven firmware, and the 256 KB flash provides sufficient room for protocol handling and configuration logic. Its 36 KB RAM is useful for maintaining schedules, counters, and communication buffers. The 3.3 V supply aligns with many low-power building electronics, while the 48-LQFP footprint simplifies assembly where a fine-pitch package would be inconvenient. Validate the digital input thresholds, relay-driver isolation, watchdog behavior, and fail-safe requirements in the final design.

🌐

Communication Gateway

The LPC11U68JBD48E is appropriate for a small serial gateway that translates data between a local sensor bus and a higher-level network interface. Its 50 MHz Cortex-M0+ core can service protocol state machines and buffering, while 256 KB of flash can hold communication firmware and field-upgrade logic. The 36 KB RAM supports concurrent receive and transmit queues without relying on external SRAM. The 48-pin LQFP package leaves access to a broad pin count for UART, SPI, and other interface assignments, subject to the exact alternate-function map. Design the communications interface for voltage levels, termination, isolation, and protocol timing rather than assuming compatibility with another LPC family member.

📱

Portable Data Logger

The LPC11U68JBD48E can serve as the control core of a portable data logger that stores sensor readings and periodically transfers them to a host. Its 256 KB of internal flash provides space for firmware, event logs, and calibration information, while 36 KB of RAM supports working buffers during acquisition. The 32-bit architecture eases the use of structured data formats and cryptographic or checksum routines compared with an 8-bit processor. Operating at 3.3 V helps with compact battery-powered designs, but average current depends on the selected clock, peripheral activity, and sleep strategy. Confirm retention behavior, write endurance, low-power modes, and regulator efficiency from the manufacturer documentation before defining the storage scheme.

🧩

Smart Home Controller

The LPC11U68JBD48E is suitable for a smart-home controller that coordinates switches, sensors, indicators, and a low-speed communications link. The 50 MHz Cortex-M0+ core allows responsive event handling and compact firmware, while the 256 KB flash and 36 KB RAM avoid an external memory requirement for moderate application complexity. Its 48-LQFP package is practical for moderate-density boards that favor inspection and reworkability. A 3.3 V system architecture simplifies integration with common digital peripherals. The designer should still account for ESD protection on externally accessible connectors, relay transients, debounce timing, firmware update security, and the difference between a reset requirement and the device's documented low-power capabilities.

🔧

Compact Consumer Accessory

The LPC11U68JBD48E can control compact consumer accessories that combine a few inputs, an indicator or actuator, and a serial connection to a phone or host device. Its 32-bit Cortex-M0+ architecture provides an efficient platform for protocol handling and control logic, and its integrated 256 KB flash supports a complete application without external program storage. The 36 KB RAM is sufficient for short message buffers and application state. The 3.3 V supply and 7 mm by 7 mm LQFP package support compact but manufacturable assemblies. Validate the accessory's regulatory, ESD, brownout, standby-current, and connector requirements, because processor selection alone does not establish product compliance.

What are the key specifications of LPC11U68JBD48E?
The LPC11U68JBD48E is a 32-bit ARM Cortex-M0+ microcontroller rated for operation up to 50 MHz, with 256 KB of flash program memory and 36 KB of RAM. It operates from 3.3 V and is packaged in a 48-pin, 7 mm by 7 mm LQFP. According to the NXP product-page information and the exact-device distributor listing, it belongs to the LPC11Uxx family and provides sufficient memory for embedded control, communications, and sensor-processing firmware.
What is the LPC11U68JBD48E used for?
The LPC11U68JBD48E is used for compact embedded control tasks that combine 32-bit processing with on-chip flash and RAM. Its 50 MHz ARM Cortex-M0+ core and 256 KB of flash suit industrial monitoring, sensor nodes, communications endpoints, and building-control products. According to the NXP LPC11Uxx family description, the MCU family targets cost-sensitive replacements for 8-bit and 16-bit designs while retaining a simple, efficient instruction set.
What is the difference between LPC11U68JBD48E and LPC11U68JBD48?
LPC11U68JBD48E is the orderable suffix used for the E-grade LPC11U68JBD48 device, and NXP lists LPC11U68JBD48 as active. The available product information identifies the E ordering code as a 50 MHz ARM Cortex-M0+ MCU with 256 KB of flash in a 48-LQFP package. Additional grade-specific distinctions must be confirmed against the manufacturer's ordering-information table before production release.
How much flash and RAM does LPC11U68JBD48E have?
The LPC11U68JBD48E has 256 KB of flash program memory and 36 KB of RAM. According to the NXP product listing and the exact-device component listing, these resources support an embedded application without requiring external program memory. Flash can hold firmware, configuration, and boot code, while the 36 KB RAM provides working space for stack, buffers, protocol state, and application variables.
What is the operating voltage of LPC11U68JBD48E?
The LPC11U68JBD48E is listed at 3.3 V operating supply voltage. The device also operates across an industrial temperature range of -40 °C to +105 °C. According to the exact-device product listing, the E suffix denotes the broader-temperature ordering variant. Confirm regulator tolerances, I/O levels, and power-sequencing limits in the NXP datasheet before connecting external circuitry.
What package does LPC11U68JBD48E use?
The LPC11U68JBD48E uses a 48-pin LQFP package measuring 7 mm by 7 mm. According to the exact-part listing, it is supplied in tray format for this orderable configuration. The footprint supports a conventional lead pitch, but the PCB land pattern, pin-1 orientation, exposed pad status, and soldering profile must be copied from the manufacturer package drawing rather than inferred from the family name.
Where can I download the LPC11U68JBD48E datasheet?
Download the LPC11U68JBD48E documentation from the NXP product page linked on this page. The manufacturer's LPC11U68JBD48 product page provides the current data-sheet and supporting documentation for the LPC11U68 family, while the exact E suffix and 48-LQFP ordering details should be checked in the datasheet and ordering-information sections. Use those documents for pinout, clocks, memory map, and electrical limits.
Where can I find the LPC11U68JBD48E pinout?
The LPC11U68JBD48E pinout is located in the pin-description and package-drawing sections of the NXP LPC11U68 documentation. The exact device is a 48-pin LQFP, but its complete numbered signal list is not reproduced on this page to avoid transcription errors. Assign PCB nets directly from the manufacturer pin table and cross-check pin 1, power pins, ground pins, and alternate-function assignments before fabrication.
Is LPC11U68JBD48E suitable for industrial sensor nodes?
The LPC11U68JBD48E is suitable for many industrial sensor-node designs because it combines a 50 MHz 32-bit Cortex-M0+ core, 256 KB of flash, 36 KB of RAM, and a -40 °C to +105 °C temperature range. Its 3.3 V operation also aligns with many compact sensing systems. Environmental suitability still depends on the enclosure, power source, humidity exposure, electromagnetic environment, and product-specific qualification requirements.
Can LPC11E68JBD48E replace LPC11U68JBD48E?
LPC11E68JBD48E is a same-package comparison candidate, but it should not be treated as a confirmed drop-in replacement without reviewing the NXP device documentation. The candidate comparison covers the LPC11U68JBD48E and LPC11E68JBD48E directly, yet no explicit cross-reference statement confirms identical peripheral mapping, clock topology, and firmware compatibility. Validate the pin table, memory map, converter characteristics, and application behavior before substitution.
What is the best drop-in replacement for LPC11U68JBD48E?
No unconditional drop-in replacement is established for the LPC11U68JBD48E in the available cross-reference results. LPC11E67JBD48E and LPC11E68JBD48E are same-brand, same-package candidates worth reviewing, but the available material does not prove pin-for-pin functional equivalence. A valid replacement must match the LQFP-48 footprint, power pins, analog and digital functions, clocking, memory map, and firmware assumptions.
LPC11U68JBD48E vs LPC11E68JBD48E - which is better for a new design?
LPC11U68JBD48E is preferable when the design is intentionally based on the LPC11U68 family and its documented peripheral configuration. LPC11E68JBD48E may suit a different project architecture, but the two devices should not be selected solely from their similar 48-pin package names. Compare the Cortex core behavior, analog peripherals, timers, serial interfaces, memory organization, clock tree, and package drawing using NXP documentation.
When should I choose LPC11U68JBD48E over LPC11E68JBD48E?
Choose LPC11U68JBD48E when its documented LPC11U68 peripheral map, timing behavior, and device support align with an established firmware platform. The device provides 50 MHz operation, 256 KB of flash, and 36 KB of RAM in a 48-LQFP package. Select the LPC11E68JBD48E only after confirming its complete electrical and pin compatibility with the intended board and rebuilding or validating firmware for its device configuration.
Where can I buy LPC11U68JBD48E online?
Use the Request a Quote form on this page to request LPC11U68JBD48E availability, lot conditions, and an order quotation. The manufacturer lists LPC11U68JBD48 as active, and the exact E suffix is offered in 3.3 V, 50 MHz, 256 KB flash, 48-LQFP tray configuration. Provide the required quantity, permitted date code, and target manufacturing location with the request for a precise response.
What is the price and lead time of LPC11U68JBD48E?
Submit the LPC11U68JBD48E Request a Quote form on this page for current commercial terms, including unit pricing, quantity breaks, stock position, and production lead time. The manufacturer identifies the LPC11U68JBD48 family as active, and the exact E suffix is listed in tray packaging. Include your order quantity, schedule, and any lot-traceability requirement so the quotation reflects the intended procurement plan.

Dữ liệu tham khảo kỹ thuật cho LPC11U68JBD48E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LPC11U68JBD48E when the product requires a 50 MHz ARM Cortex-M0+ controller with 256 KB of flash, 36 KB of RAM, 3.3 V operation, and a 48-LQFP footprint. It is particularly suitable for industrial, building-control, communications, and data-logging products that benefit from 32-bit processing without a large system-on-chip package. LPC11E68JBD48E and LPC11E67JBD48E share the broad MCU and package class, but similar naming does not establish identical behavior. Consider either only after reviewing the pin table, clock system, analog blocks, timers, serial interfaces, memory map, and device-specific firmware support. For a new design, favor the LPC11U68JBD48E when its documented family behavior matches the architecture already selected. For an established PCB, confirm every pin and electrical parameter before approving either alternative as a substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LPC11E67JBD48E LPC11E68JBD48E
Manufacturer NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Product Type 32-bit ARM Cortex-M0+ microcontroller 32-bit microcontroller 32-bit microcontroller

Bảo phân biệt quan trọng

  • Exact LPC11U68 ordering identity (vsLPC11E68JBD48E)
  • Broad industrial temperature coverage (vsLPC11E67JBD48E)
  • Established exact-package ordering option (vsLPC11E67JBD48E)

Ghi chú thiết kế

Create the PCB footprint from the NXP LPC11U68 package drawing associated with the exact 48-LQFP ordering code. Confirm body size, lead pitch, pin-1 position, toe and heel geometry, and any exposed-pad connection rather than scaling a generic LQFP symbol. Reserve clean return paths for all supply and ground pins, and place required decoupling capacitors at the associated pins with short traces.

Design the 3.3 V rail around the controller's actual load, startup behavior, and peripheral current rather than the maximum clock frequency alone. Account for the peak current drawn during analog, communications, or flash activity and for voltage droop during wake-up. Use a regulator with suitable transient response and verify brownout behavior, power-on reset timing, and decoupling against the manufacturer's electrical characteristics.

Separate sensitive analog or timing-sensitive routes from fast digital switching and clocks. Provide a continuous ground reference beneath the device where the package construction permits, keep switching-current loops compact, and route external communications or sensor inputs away from noisy supply and clock traces. Review every multiplexed pin against the intended peripheral function because alternate functions can differ within the LPC11 family.

Do not assume that similar LPC11 orderable suffixes are firmware-compatible. LPC11U68JBD48E, LPC11E67JBD48E, and LPC11E68JBD48E must be checked for peripheral identity, clock configuration, interrupt mapping, pin multiplexing, memory organization, and development-tool support. Rebuild the image for the selected device and perform boundary tests on timers, communications, analog functions, and reset behavior before approving a replacement.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact orderable MPN.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

LPC11U68JBD48E datasheet LPC11U68JBD48E pinout LPC11U68JBD48E datasheet pdf LPC11U68JBD48E equivalent LPC11U68JBD48E replacement LPC11U68JBD48E cross reference LPC11U68JBD48E footprint LPC11U68JBD48E price LPC11U68JBD48E stock NXP LPC11U68JBD48E LPC11U68JBD48E vs LPC11E68JBD48E LPC11U68JBD48E application circuit

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors LPC11U68JBD48E LPC11U68JBD48 LPC11E67JBD48E LPC11E68JBD48E LPC11Uxx ARM Cortex-M0+ 32-bit microcontroller MCU embedded processor semiconductor reduced instruction set computer RISC flash memory 256 KB flash 36 KB RAM 50 MHz 3.3 V 48-LQFP LQFP family surface-mount package industrial sensor node building control communication gateway embedded data logging
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ