NXP Semiconductors

LPC2131FBD64 - 60MHz ARM7 MCU, 32KB Flash | NXP

MPN: LPC2131FBD64 ✗ Son Kullanım Zamanı
3.3 V Vdss 64-pin LQFP, 10 x 10 mm Package 60 MHz Speed 32 KB Memory
MOQ: 1 |

LPC2131FBD64 Genel Bakış

The NXP Semiconductors LPC2131FBD64 is a 16/32-bit ARM7TDMI-S microcontroller operating at 60 MHz, with 32 KB of embedded flash memory and a 64-pin LQFP package measuring 10 x 10 mm. It integrates 8 KB of SRAM, a 10-bit ADC, a DAC, GPIO, PWM, and serial peripherals for compact embedded-control designs. The LPC2131FBD64 is suitable for industrial controllers, data-acquisition equipment, communications modules, and legacy ARM7 system upgrades.

An ARM7TDMI-S microcontroller is a 32-bit RISC device that combines a conventional processor core, embedded program memory, and dedicated peripherals in one integrated circuit. Its position in the product hierarchy is microcontroller, then 32-bit RISC microcontroller, then ARM7TDMI-S embedded controller. The architecture supports 32-bit code execution while retaining deterministic interrupt-driven operation for real-time control workloads.

Principal features include a 60 MHz maximum clock, 32 KB of embedded high-speed flash, 8 KB of SRAM, a 10-bit ADC, an on-chip DAC, PWM outputs, and multiple GPIO. The 128-bit memory interface and accelerator architecture improve instruction throughput. In-System Programming and In-Application Programming support add manufacturing and field-update flexibility without removing the microcontroller from its target circuit.

The LPC2131/32/34/36/38 family uses a common hardware platform across several flash configurations. The 32 KB version has lower on-chip memory than the 64, 128, 256, and 512 KB family members, but retains the same 60 MHz ARM7TDMI-S core and 64-pin LQFP footprint. This makes the LPC2131FBD64 appropriate for compact code where external memory would otherwise increase cost and board area.

Typical applications include industrial data loggers, serial protocol converters, motor and process controllers, test equipment, and communications gateways. Its mixed-signal peripherals allow an analog sensor interface and digital control logic to share one device, while PWM and capture functions support actuator monitoring and timing tasks.

When designing around the LPC2131FBD64, check every peripheral pin against the selected board variant and provide the decoupling and oscillator arrangements shown in the manufacturer datasheet. Because this is an established ARM7 design, confirm that current toolchain, library, and driver support covers the exact firmware and production requirements before committing to a new design.

This page consolidates core specifications, ordering variants, comparison data, and practical design guidance. It also documents where package-level verification and datasheet pin descriptions should be used, helping engineers evaluate the LPC2131FBD64 without relying on generic microcontroller recommendations.

Drop-in alternatifler için LPC2131FBD64 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LPC2131FBD64 (aynı form faktörü ve ayağa oturma) — farklı olan ADC Resolution, Package, Product Type, Supply Voltage.

NXP Semiconductors
ADC Resolution: 10-bit
Package: 64-LQFP, 10 x 10 mm
Product Type: 16/32-bit ARM7 microcontroller

LPC2131FBD64/01

✅ Yerleştirme
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
16/32-bit ARM7 microcontroller · Arm7TDMI-S · 60 MHz · 32 KB · 32K x 8 bits · 10-bit · 10-bit · 46 ports

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LPC2131FBD64/01,15

✅ Yerleştirme
📦 64-LQFP (10 x 10 mm)
Same 60 MHz ARM7TDMI-S core and 32 KB flash as LPC2131FBD64 (0% difference); ordering and qualification suffix differ

📋 Katalogda Olmayan Referans Alternatifi

LPC2131FBD64/01,11

✅ Yerleştirme
📦 64-LQFP (10 x 10 mm)
Same 60 MHz ARM7TDMI-S core and 32 KB flash as LPC2131FBD64 (0% difference); ordering and qualification suffix differ

📋 Katalogda Olmayan Referans Alternatifi

LPC2131FBD64/01S

✅ Yerleştirme
📦 64-LQFP (10 x 10 mm)
Same 60 MHz core and 32 KB flash configuration as LPC2131FBD64 (0% difference in both key ratings); documented ordering suffix differs

📋 Katalogda Olmayan Referans Alternatifi

LPC2131FBD64 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 16/32-bit ARM7TDMI-S RISC microcontroller
Maximum CPU Clock 60 MHz
Embedded Flash Memory 32 KB
Flash Organization 32K x 8 bits
SRAM 8 KB
ADC Resolution 10 bits
DAC Integrated
Besleme Gerilimi 3.3 V
Processor Core ARM7TDMI-S
Memory Interface 128 bits wide
Program Memory 32 KB embedded high-speed flash
Programming Support ISP and IAP
Paket 64-pin LQFP, 10 x 10 mm
Montaj Türü Surface mount
RoHS Durumu unknown
REACH Status unknown

LPC2131FBD64 64-pin lqfp, 10 x 10 mm Pin Yapısı Kılavuzu

LPC2131FBD64 (64-pin lqfp, 10 x 10 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-pin lqfp, 10 x 10 mm paket pin çizelgesi için LPC2131FBD64

Ayrıntılı pin çıkış verisi mevcut değil: LPC2131FBD64.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LPC2131FBD64 için uygundur 6 uygulamas: Industrial Data Acquisition Controller, Serial Protocol Converter, Motor and Process Control, Communications Gateway Module, Embedded Test and Measurement, Legacy ARM7 Equipment Upgrade.

🏭

Industrial Data Acquisition Controller

The LPC2131FBD64 fits compact data-acquisition and condition-monitoring equipment because its 60 MHz ARM7TDMI-S core can service interrupt-driven sampling while the integrated 10-bit ADC handles analog sensor inputs. Its 32 KB flash and 8 KB of SRAM are sufficient for compact buffering, calibration tables, and communication routines. Use the PWM outputs for excitation or reference timing, and verify the analog pin multiplexing against the NXP datasheet before final routing.

🌐

Serial Protocol Converter

The LPC2131FBD64 can serve as a protocol-conversion gateway between legacy serial equipment and a host controller. The ARM7TDMI-S core executes at 60 MHz, allowing the firmware to handle framing, checksums, buffering, and real-time event scheduling, while the 32 KB flash footprint stores fixed protocol tables and 8 KB of SRAM supports short frame buffering. Its integrated ADC and DAC are optional if the converter also performs analog monitoring.

⚙️

Motor and Process Control

The LPC2131FBD64 is appropriate for small motor controllers and industrial process-control modules where deterministic timing, mixed-signal I/O, and compact firmware are priorities. Its 60 MHz core supports rapid control-loop execution, the PWM channels can generate actuator commands, and the 10-bit ADC supports feedback measurement. Keep the analog reference, power routing, and PWM outputs within the electrical conditions defined in the manufacturer datasheet.

📡

Communications Gateway Module

The LPC2131FBD64 can form the control core of a small communications gateway that supervises UART, SPI, and other embedded interfaces. Its 128-bit memory interface and accelerator architecture support efficient 32-bit instruction execution at the 60 MHz clock, while ISP and IAP simplify production programming and controlled firmware updates. The 32 KB flash budget is suitable for lightweight protocol stacks, not large TCP or TLS implementations.

🧪

Embedded Test and Measurement

The LPC2131FBD64 is useful in legacy-compatible test equipment where stimulus generation, timing, and data capture must share one microcontroller. Its PWM blocks, ADC, DAC, GPIO, and 60 MHz processing core support measurement sequencing and response generation within a single controller. The 8 KB of SRAM limits long waveform capture, so use external storage when records exceed the device’s local buffering capacity.

🔧

Legacy ARM7 Equipment Upgrade

The LPC2131FBD64 is appropriate for maintaining or selectively upgrading established ARM7TDMI-S equipment without introducing a new processor architecture or board form factor. The familiar 64-LQFP footprint, 60 MHz clock, and 32 KB flash organization allow an existing design to retain much of its software and hardware structure. Confirm pin multiplexing, peripheral assignments, and application-code compatibility before treating the upgrade as a component substitution.

Önerilen Ürünler Özeti

LPC2131FBD64/01 NXP Semiconductors Kullanıldığı Yer: Industrial Data Acquisition Controller, Motor and Process Control, Embedded Test and Measurement LPC2131FBD64/01,15 Same-device ordering configuration Kullanıldığı Yer: Industrial Data Acquisition Controller, Motor and Process Control, Embedded Test and Measurement, Legacy ARM7 Equipment Upgrade LPC2131FBD64/01,11 Same-device ordering configuration Kullanıldığı Yer: Serial Protocol Converter, Communications Gateway Module, Legacy ARM7 Equipment Upgrade LPC2131FBD64/01S Same-device ordering configuration Kullanıldığı Yer: Serial Protocol Converter, Communications Gateway Module
What is the LPC2131FBD64?
The LPC2131FBD64 is an NXP 16/32-bit ARM7TDMI-S microcontroller rated for operation up to 60 MHz. It combines 32 KB of embedded flash, 8 KB of SRAM, a 10-bit ADC, a DAC, PWM, GPIO, and serial interfaces in a 64-pin LQFP package. According to the NXP LPC2131/32/34/36/38 datasheet, the family is intended for embedded control, mixed-signal acquisition, and real-time communications designs.
What are the key specifications of LPC2131FBD64 that engineers should know?
The LPC2131FBD64 combines a 60 MHz ARM7TDMI-S core, 32 KB of embedded flash, 8 KB of SRAM, a 10-bit ADC, a DAC, and a 64-pin 10 x 10 mm LQFP package. The NXP datasheet also identifies ISP and IAP programming support and a 128-bit memory interface. These figures place the device between simple 8-bit controllers and larger Cortex-M systems while supporting deterministic embedded control.
How much flash and SRAM does the LPC2131FBD64 have?
The LPC2131FBD64 provides 32 KB of embedded high-speed flash memory and 8 KB of SRAM. The flash is organized as 32K x 8 bits according to the NXP product documentation. These resources suit compact firmware with peripheral control, protocol handling, and local data buffering, although designs requiring large frame buffers or extensive logging should add external memory or choose a higher-density family member.
Is the LPC2131FBD64 an ARM7 or Cortex-M microcontroller?
The LPC2131FBD64 uses an ARM7TDMI-S core, not an ARM Cortex-M core. The NXP datasheet describes a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support. Because the instruction set and peripheral model differ from Cortex-M devices, existing ARM7 firmware and startup code cannot be transferred directly to a Cortex-M replacement without software adaptation.
Where can I download the LPC2131FBD64 datasheet PDF?
The official LPC2131FBD64 datasheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/LPC2131_32_34_36_38.pdf. The document covers the shared LPC2131, LPC2132, LPC2134, LPC2136, and LPC2138 family platform, including clocking, memory, analog peripherals, pin descriptions, and electrical characteristics. Use the family pin-description table to verify board-level assignments.
Where can I find the LPC2131FBD64 pinout?
The LPC2131FBD64 pinout is defined in the official NXP LPC2131/32/34/36/38 datasheet. Because the device is a 64-lead LQFP, the package pin-description table and package drawing should be read together with the selected board configuration. Verify multiplexing options, analog-capable pins, power pins, and debug functions before assigning PCB tracks.
What can replace the LPC2131FBD64?
The closest documented replacements are NXP ordering variants of the same LPC2131 device family, including LPC2131FBD64/01, LPC2131FBD64/01,15, and LPC2131FBD64/01,11. They retain the 60 MHz ARM7TDMI-S core, 32 KB flash configuration, and 64-pin LQFP footprint. A different manufacturer’s MCU would require firmware, toolchain, peripheral, and pin-level verification rather than a blind substitution.
Can LPC2131FBD64/01,15 replace the LPC2131FBD64?
Yes, LPC2131FBD64/01,15 is a documented ordering variant of the LPC2131FBD64 with the same 60 MHz ARM7TDMI-S configuration, 32 KB flash, and 64-LQFP package. The key differences concern the ordering and qualification suffix rather than the headline core or memory ratings. Confirm the temperature grade, device revision, and procurement conditions specified in the NXP part documentation before substitution.
What is the difference between LPC2131FBD64 and LPC2131FBD64/01?
The LPC2131FBD64 and LPC2131FBD64/01 share the same 60 MHz ARM7TDMI-S core and 32 KB flash rating, while the /01 suffix distinguishes a documented ordering configuration. The headline clock, memory, and 64-LQFP package figures are unchanged, so the electrical and software architecture remain aligned. Verify the ordering code, temperature range, and lifecycle conditions before release to production.
When should I choose LPC2131FBD64 over a higher-density LPC213x device?
Choose the LPC2131FBD64 when 32 KB of flash and 8 KB of SRAM are sufficient and minimizing on-chip memory is a priority. Choose a 64, 128, 256, or 512 KB family member when firmware growth, buffering, or in-application updates require more memory. The family shares a common architecture, but each density has different program and RAM budgets that must be checked against the final firmware.
Is the LPC2131FBD64 suitable for an industrial controller?
The LPC2131FBD64 is suitable for compact industrial controller designs that fit within 32 KB of flash and 8 KB of RAM. Its 60 MHz ARM7TDMI-S core supports responsive interrupt-driven control, while the 10-bit ADC, DAC, PWM, and GPIO support analog measurement and actuator functions. For deployments requiring a current long-term supply commitment, confirm lifecycle availability before design freeze.
What is the lifecycle status of the LPC2131FBD64?
The LPC2131FBD64 is treated as an obsolete legacy microcontroller for sourcing purposes. Its established ARM7 architecture remains technically usable, but new production designs should not assume long-term availability. Request the current lifecycle, traceability, and any remaining lot information through the Request a Quote form on this page before committing a new production run.
How do I buy LPC2131FBD64 online and check its price?
Use the Request a Quote form on this page to request LPC2131FBD64 pricing, current inventory, traceability documents, and minimum-order quantities. Because the device is a legacy ARM7 product, availability may be limited and lot-specific. Provide the required package, temperature, and quality documentation so the quotation matches the exact ordering configuration intended for production.
What is the lead time for LPC2131FBD64?
The current lead time for LPC2131FBD64 depends on remaining lot inventory, date-code requirements, and traceability documentation. Request the quotation and lead time through the Request a Quote form on this page. Because this is an obsolete legacy device, supply can be lot-limited, so schedule early and confirm the date code before committing to a build.
Is LPC2131FBD64 in stock?
Stock for LPC2131FBD64 may vary by package suffix, lot, date code, and quality documentation. Use the Request a Quote form on this page to ask for current availability and a committed delivery schedule. For obsolete devices, confirm the exact manufacturer part number and traceability requirements in writing before placing a production order.
Can an STM32 or other modern MCU replace the LPC2131FBD64 directly?
A modern Cortex-M microcontroller is usually not a direct drop-in replacement for the LPC2131FBD64 because the ARM7TDMI-S core, peripheral architecture, and programming model differ. Although several 64-lead devices may offer similar memory and peripheral counts, PCB signals, startup code, register access, timers, and firmware must be re-verified. Treat such choices as redesigns rather than automatic replacements.

Mühendislik referans verileri: LPC2131FBD64 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LPC2131FBD64 when an existing or new ARM7TDMI-S design fits within 32 KB of flash and 8 KB of SRAM and uses the 64-pin LQFP footprint. It is appropriate for compact data-acquisition, protocol-conversion, and industrial-control products where deterministic real-time behavior and mixed-signal peripherals matter. Select LPC2131FBD64/01, /01,15, /01,11, or /01S when procurement documentation identifies one of those ordering configurations as the required production version. Verify the suffix, temperature range, date code, and qualification status before release. A Cortex-M MCU may offer a longer roadmap and newer development tools, but it is not a drop-in replacement because the core, startup code, peripheral architecture, and pin multiplexing differ. For new high-volume products, confirm lifecycle availability and long-term sourcing before committing the design.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LPC2131FBD64/01 LPC2131FBD64/01,15 LPC2131FBD64/01,11 LPC2131FBD64/01S
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) - same 64-LQFP (10 x 10 mm) - same 64-LQFP (10 x 10 mm) - same 64-LQFP (10 x 10 mm) - same
Processor Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Clock 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Embedded Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB
SRAM 8 KB 8 KB 8 KB 8 KB 8 KB
ADC Resolution 10 bits 10 bits 10 bits 10 bits 10 bits
Programming Support ISP and IAP ISP and IAP ISP and IAP ISP and IAP ISP and IAP
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

Ana Farklılayıcılar

  • Identical core and memory organization across documented ordering variants (karşılaştırma:LPC2131FBD64/01,15)
  • Mixed-signal integration reduces external component count (karşılaştırma:LPC2131FBD64/01,11)
  • Field-update capability within a constrained embedded footprint (karşılaştırma:LPC2131FBD64/01S)

Tasarım Notları

Route the 64-pin LQFP footprint in accordance with the NXP package drawing, including correct pad length, pitch, and exposed thermal considerations where applicable. Keep the 3.3 V supply pins and decoupling capacitors close to their assigned pins, and preserve the datasheet-recommended return path. Verify every multiplexed GPIO, ADC, DAC, PWM, and debug signal against the selected pin-connectivity table before releasing artwork.

Calculate the digital and analog load before fixing power capacity, then follow the manufacturer’s recommended supply voltage and decoupling arrangement. The ADC and DAC may require filtered analog references and separate routing to reduce coupling from switching nodes. For mixed-signal boards, partition analog and digital return paths carefully and avoid routing PWM edges beneath sensitive analog inputs.

Do not treat a 64-lead Cortex-M device as a pin-compatible substitute for this ARM7TDMI-S part. Confirm the complete pin-connectivity table, startup sequence, peripheral register map, and application code against the NXP family datasheet. Also verify that 32 KB of flash and 8 KB of SRAM are sufficient after linker-map analysis, including space reserved for bootloader, interrupt vectors, and IAP code.

Use the fastest available debug and serial programming interface only after confirming its pin multiplexing and signal-integrity requirements. Avoid long unterminated traces from the microcontroller to external connectors, especially on lines shared with ADC inputs. For PWM-driven loads, keep switching-current paths compact and provide local bulk decoupling so control-loop timing is not disturbed by supply transients.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance attributes are not stated in the product documentation pages for this legacy device. Request current RoHS, REACH, and material-declaration documentation through the Request a Quote form on this page.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LPC2131FBD64 datasheet LPC2131FBD64 datasheet pdf LPC2131FBD64 pinout LPC2131FBD64 specifications NXP LPC2131FBD64 LPC2131FBD64 drop-in replacement LPC2131FBD64 equivalent LPC2131FBD64 vs LPC2131FBD64/01,15 LPC2131FBD64 price LPC2131FBD64 stock LPC2131 64 LQFP pinout LPC2131 60MHz 32KB flash

İlgili Bileşenler ve Terimler

NXP Semiconductors LPC2131FBD64 LPC2131FBD64/01 LPC2131FBD64/01,15 LPC2131FBD64/01,11 LPC2131FBD64/01S ARM7TDMI-S 32-bit RISC microcontroller embedded microcontroller ARM7 MCU In-System Programming ISP In-Application Programming IAP embedded high-speed flash SRAM 10-bit ADC DAC PWM LQFP-64 surface-mount package industrial data acquisition serial protocol conversion process control mixed-signal embedded system
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle