Analog Devices

MAX232ACUE+T - 5V Dual RS-232 Transceiver | Analog Devices

MPN: MAX232ACUE+T ✓ Aktif
5 V Vdss TSSOP Package
MOQ: 1 |

MAX232ACUE+T Genel Bakış

Analog Devices MAX232ACUE+T is a 5V-powered, dual RS-232 transceiver with two drivers and two receivers, supplied in a 16-pin TSSOP package. The MAX232ACUE+T designation identifies the commercial-temperature version with gull-wing leads in a rectangular surface-mount package. It is intended for systems that need to translate digital logic levels to and from the voltage, polarity, and drive characteristics required by RS-232 links.

An RS-232 transceiver is an interface IC within the broader hierarchy of interface semiconductors, serial communication devices, and data-conversion components. It combines transmit and receive functions in one package: outgoing logic signals pass through line drivers that provide RS-232-compatible levels, while incoming serial signals pass through receivers that convert RS-232 levels back to logic-compatible signals. Integrating both directions simplifies PCB layout in point-to-point serial links, industrial controllers, and service interfaces.

The primary identified features are two transmit channels, two receive channels, operation from a 5V supply, and a compact 16-pin TSSOP footprint. The MAX232ACUE+T uses the MAX232 family interface architecture and is intended for commercial-temperature equipment. Its gull-wing terminal arrangement supports conventional surface-mount assembly and inspection after soldering, while the 16-pin package provides a practical size reduction compared with larger through-hole implementations.

Technical suitability depends on the voltage levels, data rate, cable length, grounding method, and protection strategy of the connected RS-232 port. Because RS-232 uses single-ended signaling and negative-going voltage levels, the interface must be evaluated together with its charge-pump capacitors, supply bypass, connector protection, and common-mode conditions. The manufacturer datasheet should be used for the complete pin-description table, recommended capacitor values, electrical limits, and operating conditions before layout release.

Typical uses include configuration and service ports on industrial equipment, serial links between controllers and peripheral modules, RS-232 test equipment, and legacy communications interfaces retained during product modernization. The device is especially useful where two full-duplex RS-232 channels are required but a larger multi-channel transceiver would be unnecessary. A design should still verify that the selected connector and cable environment match the electrical limits of the interface.

PCB layout is a central implementation consideration. Place the required charge-pump and bypass capacitors close to their associated pins, keep the RS-232 driver outputs away from sensitive analog or high-speed logic, and provide an appropriate chassis or signal-ground strategy at the connector. Add transient protection when the cable can be longer than the protected equipment area or exposed to industrial transients.

This page organizes the verified product identity, electrical requirements, pin-compatible replacement options, interface applications, and practical RS-232 layout guidance. It helps engineers move from MPN identification to footprint, replacement, and circuit-implementation checks while keeping the final design anchored to the manufacturer datasheet.

Drop-in alternatifler için MAX232ACUE+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX232ACUE+T (aynı form faktörü ve ayağa oturma) — farklı olan Interface Standard.

Analog Devices
Interface Standard: Full RS-232
İle Karşılaştır MAX232ACUE+T →

MAX232AEUE+

✅ Yerleştirme
Analog Devices
📦 16-pin TSSOP
RS-232 transceiver · 2 drivers · 2 receivers · Full RS-232 · 4.5 V to 5.5 V · +5 V · 16-pin TSSOP · 16 pins

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX232CUE+

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-pin TSSOP
Same MAX232 family and 16-pin TSSOP footprint; C-suffix device-function details and temperature classification must be confirmed against the manufacturer ordering table.

📋 Katalogda Olmayan Referans Alternatifi

MAX232CUE+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-pin TSSOP
Same MAX232 family and 16-pin TSSOP footprint; the +T production configuration differs from MAX232CUE+, while functional ratings require ordering-table confirmation.

📋 Katalogda Olmayan Referans Alternatifi

MAX232ACUE+

✅ Yerleştirme
Analog Devices
📦 16-pin TSSOP
Dual RS-232 transceiver · 2 · 2 · 120 kbps · 4.5 V to 5.5 V · Single +5 V · EIA/TIA-232E and V.28/V.24 · 0 °C to +70 °C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX232ACUE+T Özellikler

Product Type RS-232 transceiver interface IC
Transmitter Count 2
Receiver Count 2
Besleme Gerilimi 5 V
Interface Standard RS-232
Package Type TSSOP
Total Terminal Count 16
Terminal Form Gull wing
Package Shape Rectangular
Montaj Türü Surface mount
Temperature Grade Commercial
Driver and Receiver Configuration 2/2 full RS-232 transceiver

MAX232ACUE+T rectangular Pin Yapısı Kılavuzu

MAX232ACUE+T (rectangular paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

rectangular paket pin çizelgesi için MAX232ACUE+T

Ayrıntılı pin çıkış verisi mevcut değil: MAX232ACUE+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX232ACUE+T için uygundur 6 uygulamas: Industrial Controller Service Port, RS-232 Test and Measurement Equipment, Point-to-Point Serial Data Link, Serial Configuration and Diagnostics, Legacy Equipment Modernization, Data Acquisition and Control Module.

🏭

Industrial Controller Service Port

The MAX232ACUE+T fits industrial controller service ports that require two RS-232 channels for configuration, diagnostics, and production programming. Its two transmitters and two receivers provide bidirectional logic-to-RS-232 conversion in one 16-pin TSSOP package, reducing the number of separate interface devices and conserving board area. The 5V supply requirement integrates naturally with controller rails that already operate at that level. Place the charge-pump capacitors close to the IC and route each driver output directly toward its connector, keeping external switching nodes away from the receiver inputs. Use transient protection at the connector when the service cable can extend beyond the controlled equipment area.

🔧

RS-232 Test and Measurement Equipment

The MAX232ACUE+T is suitable for test and measurement equipment that must exchange commands and results through legacy RS-232 ports. Two driver channels support outbound control or measurement data, while two receiver channels accept instrument responses or operator commands. The 16-pin TSSOP package offers a compact surface-mount implementation, and the 5V-powered architecture fits instrument designs that already distribute a 5V rail. Keep the interface network close to the connector, provide a defined ground reference, and account for the RS-232 level shifts when selecting protection components or level translators elsewhere in the signal path.

🌐

Point-to-Point Serial Data Link

MAX232ACUE+T can serve as the interface at either end of a point-to-point RS-232 link between two digital controllers. The integrated dual-driver and dual-receiver arrangement supports two independent communication paths when the connected equipment exposes more than one RS-232 channel. Because the device changes voltage levels and signal polarity, the host logic can remain at ordinary CMOS-compatible levels while the cable carries RS-232 signals. Verify the maximum supported data rate and receiver threshold requirements in the manufacturer datasheet, and use a twisted-pair cable with the appropriate signal-ground connection for reliable operation.

🖥️

Serial Configuration and Diagnostics

The MAX232ACUE+T is well suited to product configuration, boot-loader access, and diagnostic channels embedded in control systems. Two receivers allow a system to monitor command or status information, while two drivers permit responses and configuration data to reach the external host. Its 16-pin TSSOP package simplifies placement on densely populated control boards, while the 5V supply fits many mixed-signal systems. For robust field operation, isolate the logic side from cable transients with a suitable protection network and route the driver outputs away from sensitive analog inputs to minimize capacitive coupling.

🔄

Legacy Equipment Modernization

MAX232ACUE+T can preserve an existing RS-232 interface while modernizing the logic and power architecture around it. Equipment with a legacy service or data port can use the IC to retain connector-level compatibility without redesigning the external cable or host software. The commercial-temperature ordering code is appropriate for designs whose specified environmental range remains within its rating. During replacement, compare every pin in the manufacturer datasheet, especially enable, ground, charge-pump, and supply connections, and verify that the new board provides the required bypass and protection arrangements.

📡

Data Acquisition and Control Module

The MAX232ACUE+T fits data-acquisition modules that communicate with a host computer over RS-232. Two transmit channels can carry commands and configuration data, while two receive channels can return measurements and status information. Using a dedicated interface IC keeps the RS-232 voltage translation away from sensitive acquisition circuitry and makes signal routing easier to review. Place the device near the serial connector when practical, maintain a short ground return, and separate the transmit routes from high-impedance sensor inputs to reduce noise pickup. Confirm the supported data rate and channel direction assignments in the manufacturer datasheet.

What is MAX232ACUE+T?
MAX232ACUE+T is a 5V-powered, dual RS-232 transceiver from Analog Devices with two transmitters and two receivers in a 16-pin TSSOP package. According to the Analog Devices MAX232/MAX241 datasheet, the MAX232 family integrates the bidirectional line-driver and receiver functions needed for RS-232 communications. The commercial-temperature suffix and gull-wing TSSOP construction make it suitable for conventional industrial, control, and instrumentation boards using surface-mount assembly.
Where can I download the MAX232ACUE+T datasheet PDF?
The MAX232ACUE+T datasheet is available from the Analog Devices MAX232/MAX241 documentation page linked on this product page. The document contains the authoritative pin descriptions, absolute maximum ratings, recommended operating conditions, driver and receiver electrical characteristics, and charge-pump capacitor requirements. Use the package drawing for the 16-pin TSSOP land pattern and verify every connection against the pin-description table before fabrication.
What are the key specifications of MAX232ACUE+T that engineers should know?
The MAX232ACUE+T is a 5V RS-232 interface IC containing two drivers and two receivers in a 16-pin TSSOP package. The verified product identity also identifies commercial-temperature grade, gull-wing terminals, rectangular package construction, and surface mounting. According to the Analog Devices MAX232/MAX241 datasheet, designers should additionally check maximum data rate, supply current, logic thresholds, driver output levels, and external capacitor requirements against their system conditions.
Is MAX232ACUE+T pin compatible with MAX232AEUE+?
MAX232AEUE+ is identified by cross-reference information as a complete replacement for MAX232ACUE+, with consistent terminals, package, and principal performance characteristics. Both use the 16-pin TSSOP interface arrangement, so an existing board can generally reuse the footprint and signal assignments. Final qualification should still include supply limits, operating temperature, data-rate requirements, and any production-level qualification requirements imposed by the finished equipment.
When should I choose MAX232ACUE+T over MAX232AEUE+?
Choose MAX232ACUE+T when the equipment is assigned commercial-temperature operating conditions and the required interface functions match the MAX232ACUE+T specification. Choose MAX232AEUE+ when a different suffix in the MAX232 family better represents the required temperature grade or production configuration, provided it remains in the same TSSOP pin-compatible family. Since the two parts are closely related, review the manufacturer ordering table and your environmental requirements before fixing the BOM.
What is the best drop-in replacement for MAX232ACUE+T?
MAX232AEUE+ is the clearest documented drop-in replacement because the cross-reference information identifies consistent terminals and package characteristics. Same-family MAX232CUE+ and MAX232CUET-related commercial configurations can also share the TSSOP footprint, but temperature, marking, and ordering details should be checked against the manufacturer’s latest documentation. Do not substitute a wide SOIC or narrow-body SOIC device without changing the PCB footprint and pin geometry.
Can MAX232AEUE+ replace MAX232ACUE+T without a PCB change?
MAX232AEUE+ can replace MAX232ACUE+T without a PCB change when the original design uses the compatible 16-pin TSSOP footprint and satisfies the replacement’s electrical and temperature limits. The documented cross-reference describes the devices as having consistent terminals and packages. Engineers should still confirm shutdown or enable behavior, supply requirements, data rate, and environmental classification because a shared footprint does not by itself guarantee suitability for every operating condition.
MAX232ACUE+T vs MAX232CUE+T: which is better for commercial equipment?
MAX232ACUE+T is the preferred selection when its commercial-temperature classification and documented operating limits match the equipment specification. MAX232CUE+T belongs to the same MAX232 family and can provide a close TSSOP-compatible alternative, but its exact suffix ratings and device behavior should be confirmed in the manufacturer ordering information. The better choice is the part whose temperature grade, electrical limits, lifecycle status, and production configuration match the actual product requirements.
What is a MAX232ACUE+T equivalent from another manufacturer?
The available cross-reference results identify replacement manufacturers and several pin-to-pin products, but the verified search does not provide enough manufacturer-specific MPN, package, and parameter details to name a cross-brand equivalent safely. A valid second source must use the same 16-pin TSSOP footprint and preserve the driver, receiver, shutdown, and supply-pin assignments. Use the manufacturer or component cross-reference tools to confirm the candidate before treating it as a production drop-in replacement.
How do I design the charge-pump capacitors for MAX232ACUE+T?
Place the charge-pump capacitors directly at the MAX232ACUE+T pins specified in the Analog Devices MAX232/MAX241 datasheet, using the exact capacitance, tolerance, and voltage rating recommended there. Keep each capacitor’s loop short and connect it to the associated supply or charge-pump node without routing through protection components. Incorrect values, long traces, or unsuitable dielectric types can reduce startup behavior, output level margin, or noise immunity.
Does MAX232ACUE+T require external RS-232 protection?
The MAX232ACUE+T performs logic-to-RS-232 and RS-232-to-logic conversion, but cable-side transient protection depends on the installation environment. Add appropriately rated protection when the port connects to long external cables, industrial machinery, or unprotected user-accessible equipment. Select the protection topology and voltage ratings so that normal RS-232 signal excursions remain unclipped, and connect surge-return current to the appropriate chassis or signal-ground path.
What is the pinout of MAX232ACUE+T?
MAX232ACUE+T uses a 16-pin TSSOP layout containing two RS-232 receiver inputs, two driver outputs, supply and ground connections, enable-related pins, and charge-pump nodes. Use the pin-description table in the Analog Devices MAX232/MAX241 datasheet as the authoritative assignment for the selected suffix and package. Do not infer a different MAX232 suffix’s enable or shutdown configuration solely from the family name, because pin behavior and ratings can vary within the family.
Where can I buy MAX232ACUE+T and check its lead time?
Use the Request a Quote form on this page to request current availability, lead time, and order quantity for MAX232ACUE+T. The part is identified by distributors as a 5V, 16-pin TSSOP, 2/2 RS-232 transceiver, but production planning should use the current manufacturer part status and an authorized supply response rather than a historical listing snapshot. Include your required shipment date, annual usage, and approved package format in the request.
What is the price of MAX232ACUE+T?
Current commercial pricing for MAX232ACUE+T should be obtained through the Request a Quote form on this page because availability and order conditions can change with quantity and market conditions. The quote request can specify the required quantity, shipping destination, and delivery schedule. Confirm that the quotation identifies the exact MAX232ACUE+T ordering code, 16-pin TSSOP package, commercial-temperature grade, and any required production traceability.
Is MAX232ACUE+T in stock?
Current stock for MAX232ACUE+T should be confirmed through the Request a Quote form on this page, especially for production quantities. The component is distributed as an active-looking catalog ordering code, but a distributor search result alone does not guarantee the quantity, date code, packaging, or traceability required by a specific build. State your required quantity and target delivery date in the request so the response can be matched to the actual procurement requirement.
Is MAX232ACUE+T compliant with RoHS and REACH?
Compliance for MAX232ACUE+T must be confirmed using the current manufacturer product declaration for the exact ordering code. The available product information does not provide an explicit RoHS or REACH statement, so no compliance conclusion should be assumed solely from the distributor listing. Request the material-compliance declaration when your procurement process requires it, and verify whether the tape-and-reel production configuration affects the documentation supplied.

Mühendislik referans verileri: MAX232ACUE+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MAX232ACUE+T when a design needs two RS-232 drivers and two receivers, a 5V supply, and a 16-pin TSSOP footprint for commercial-temperature equipment. It is appropriate for dual-channel service ports, diagnostics, point-to-point links, and legacy RS-232 interfaces. MAX232AEUE+ is the strongest documented replacement because the cross-reference describes consistent terminals and package characteristics, but verify its complete ordering and environmental requirements. MAX232CUE+ or MAX232CUE+T may fit the same footprint within the MAX232 family, although their exact device behavior and temperature grade must be confirmed in the current manufacturer documentation. MAX232ACUE+ is electrically and physically close to the target, but the explicit +T production suffix should be reviewed. Do not choose a wide SOIC or narrow SOIC alternative merely because it performs the same RS-232 function; verify the footprint and pin assignment before approving a replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX232AEUE+ MAX232CUE+ MAX232CUE+T MAX232ACUE+
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transmitter Count 2 2 2 2 2
Receiver Count 2 2 2 2 2
Interface Standard RS-232 RS-232 RS-232 RS-232 RS-232
Supply Voltage 5 V 5 V 5 V 5 V 5 V
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

Ana Farklılayıcılar

  • Compact integration of two RS-232 channels (karşılaştırma:MAX232EIPWR)
  • Documented complete-replacement option (karşılaştırma:MAX232AEUE+)
  • Commercial-temperature ordering configuration (karşılaştırma:MAX232CUE+T)

Tasarım Notları

Place the MAX232ACUE+T charge-pump capacitors at the pins shown in the manufacturer pin-description table and keep each connection loop as short as practical. Use the recommended capacitance, tolerance, dielectric type, and voltage rating. Long capacitor traces add loop area and can reduce noise immunity. Route the RS-232 driver outputs directly toward their connector pins, and avoid placing them alongside sensitive receiver or analog inputs.

Do not treat the MAX232 family name as proof that every suffix has identical enable, shutdown, or temperature behavior. MAX232ACUE+T, MAX232AEUE+, and MAX232C-series variants may differ in ordering codes and operating classifications even when they use the same TSSOP footprint. Compare the complete manufacturer ordering table, pin description, absolute maximum ratings, and environmental requirements before approving a replacement.

RS-232 is a single-ended interface, so ground offset and cable-induced transients can affect receiver operation. Route the interface ground with the cable return, use a stable reference near the transceiver, and place appropriately rated protection at an exposed connector. Keep protection return current out of sensitive analog ground paths. Validate the completed design against the maximum data rate, receiver thresholds, and system-level EMC requirements.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The product information identifies the MAX232ACUE+T as a commercial-temperature RS-232 interface IC but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. Request the current manufacturer material-compliance declaration for the exact ordering code.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MAX232ACUE+T MAX232ACUE+T datasheet MAX232ACUE+T datasheet pdf MAX232ACUE+T pinout MAX232ACUE+T equivalent MAX232ACUE+T replacement MAX232ACUE+T price MAX232ACUE+T stock Analog Devices MAX232ACUE+T MAX232ACUE+T vs MAX232AEUE+ MAX232ACUE+T TSSOP pinout MAX232ACUE+T RS-232 application circuit

İlgili Bileşenler ve Terimler

Analog Devices MAX232ACUE+T MAX232AEUE+ MAX232CUE+ MAX232CUE+T MAX232ACUE+ MAX232 RS-232 RS-232 transceiver interface IC serial communications line driver line receiver charge-pump capacitor 5V-powered interface TSSOP-16 TSSOP family surface mount SMD gull-wing lead commercial temperature grade industrial control test and measurement equipment point-to-point serial link transient protection
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle