Texas Instruments

MAX232EING4 - Dual RS-232 Transceiver | Texas Instruments

MPN: MAX232EING4 ✓ Aktif
5 V Vdss PDIP-16 Package
MOQ: 1 |

MAX232EING4 Genel Bakış

The Texas Instruments MAX232EING4 is a dual RS-232 line-driver and receiver interface IC with a 5 V supply, a maximum signaling rate of 250 kbps, and differential RS-232 outputs rated to ±9 V. The device is packaged in a 16-pin PDIP and provides on-chip charge-pump voltage conversion for a single-supply implementation.

An RS-232 transceiver is an interface IC that converts low-voltage TTL or CMOS logic signals into RS-232 bipolar levels and converts incoming RS-232 signals back into logic-compatible levels. Within the interface hierarchy, the MAX232 belongs to the RS-232 transceiver class, connects digital logic to serial communication equipment, and forms part of a broader communications interface semiconductor. It is intended for point-to-point RS-232 links rather than multidrop networks.

Key features include two driver and two receiver channels, 5 V operation, ±9 V RS-232 output levels, and ±2 kV ESD protection on the RS-232 pins. The 250 kbps maximum data rate supports common asynchronous serial interfaces when the associated baud rate, cable length, capacitance, and receiver loading permit reliable operation. An industrial temperature option allows operation from -40 °C to +85 °C.

The MAX232 architecture uses charge-pump circuits to generate the positive and negative voltages required by RS-232 transmitters. Each driver converts a logic-high or logic-low input into a corresponding bipolar output, while each receiver uses thresholding to determine the incoming signal state. The integrated voltage conversion avoids a separate negative power supply, although external charge-pump capacitors are required.

Typical applications include industrial serial controllers, data-acquisition equipment, instrumentation interfaces, service equipment, and legacy computer serial ports. The IC can bridge a UART or other CMOS/TTL controller to an RS-232 connector when signal polarity, grounding, and cable requirements are handled correctly. It is especially useful where a 5 V logic system must communicate with older RS-232 equipment.

Designers should place the charge-pump capacitors close to their associated pins and provide a stable, low-impedance bypass path at the supply pins. Long or capacitively loaded cables can reduce the usable baud rate, and the grounded shield or signal ground must be connected according to the RS-232 interface standard. Input and output logic levels should also be checked against the UART voltage thresholds.

This page combines the manufacturer’s electrical characteristics, package information, application guidance, drop-in candidates, and practical circuit considerations to support faster component selection and implementation.

Drop-in alternatifler için MAX232EING4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX232EING4 (aynı form faktörü ve ayağa oturma) — farklı olan Operating Temperature, Package, Supply Voltage, Data Rate, ESD Protection.

Maxim Integrated
Operating Temperature: 0°C to +70°C (commercial grade)
Package: 16-pin PDIP (PE)
Supply Voltage: 4.5 V to 5.5 V (single 5 V supply)
İle Karşılaştır MAX232EING4 →
Maxim Integrated
Operating Temperature: -40 C to +85 C (extended industrial)
Package: 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm)
Supply Voltage: 4.5 V to 5.5 V (single +5V supply)
İle Karşılaştır MAX232EING4 →

MAX232EPE

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Maxim Integrated
📦 PDIP-16
RS-232 Transceiver (Driver/Receiver) · 2 / 2 · 4.5 V to 5.5 V (single +5V supply) · 120 kbps (typical) · ±10 V (typical, generated internally by charge pump) · -40 C to +85 C (extended industrial) · 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) · Through-Hole

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX232EANG4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 PDIP-16
Commercial-temperature ordering option versus the MAX232EING4’s -40 °C to +85 °C rating; package and dual-channel interface remain aligned.

📋 Katalogda Olmayan Referans Alternatifi

MAX232CPE

✅ Yerleştirme
Maxim Integrated
📦 PDIP-16
RS-232 Transceiver (2 Drivers / 2 Receivers) · EIA/TIA-232E, V.28/V.24 · 4.5 V to 5.5 V (single 5 V supply) · 120 kbps · 2 · 2 · ±9 V typical (RS-232 load) · ±25 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

SP232P

✅ Yerleştirme
📦 PDIP-16
Commercial-temperature MAX232-compatible RS-232 transceiver versus the MAX232EING4’s -40 °C to +85 °C rating; verify data-rate and capacitor details before substitution.

📋 Katalogda Olmayan Referans Alternatifi

MAX232EING4 Özellikler

Device Type Dual RS-232 transceiver
Number of Driver Channels 2 channels
Number of Receiver Channels 2 channels
Besleme Gerilimi 5 V
Maximum Data Rate 250 kbps
RS-232 Output Voltage ±9 V
ESD Protection ±2 kV
İşletim Sıcaklığı -40 °C to +85 °C
Paket PDIP-16
Pin Sayısı 16 pins
Montaj Türü Through-hole

MAX232EING4 pdip-16 Pin Yapısı Kılavuzu

MAX232EING4 (pdip-16 paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

pdip-16 paket pin çizelgesi için MAX232EING4

Ayrıntılı pin çıkış verisi mevcut değil: MAX232EING4.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX232EING4 için uygundur 6 uygulamas: Industrial UART Serial Interface, Data Acquisition and Test Equipment, Legacy Computer Serial Port, Instrumentation and Sensor Gateway, Service and Diagnostic Equipment, Industrial Control and Automation.

🏭

Industrial UART Serial Interface

The MAX232EING4 fits industrial UART equipment that must translate 5 V CMOS or TTL logic into RS-232 levels. Its two driver and two receiver channels support bidirectional point-to-point serial communication, while the -40 °C to +85 °C rating covers a broad range of factory and process-control environments. The 250 kbps maximum data rate provides margin above common legacy serial baud rates, but cable capacitance and receiver loading must be checked at the intended distance. Integrated charge pumps generate the required bipolar voltage from the 5 V supply, eliminating a separate negative supply rail. Place the manufacturer-specified capacitors close to the charge-pump pins and validate the complete interface across temperature and cable length.

🔧

Data Acquisition and Test Equipment

The MAX232EING4 is appropriate for laboratory and production-test equipment that uses a legacy RS-232 command interface. Two receive channels can monitor commands or status signals, while two driver channels provide the required bipolar output levels. The -40 °C to +85 °C operating range supports equipment intended for industrial laboratories as well as factory-floor use. Because the device provides point-to-point RS-232 signaling rather than multidrop operation, it is best applied to isolated device connections or short bus arrangements validated for the intended loading. Use shielding and a properly referenced signal ground in noisy environments, and confirm the receiver and driver logic thresholds against the host UART.

🖥️

Legacy Computer Serial Port

The MAX232EING4 can connect a modern controller to a legacy computer or peripheral with an RS-232 port. The 5 V supply suits contemporary embedded systems, and the two-channel arrangement allows one duplex link plus one additional data direction. The device eliminates the negative power supply normally required by older RS-232 interface circuits because its charge pumps create positive and negative levels internally. At the connector end, confirm the RS-232 signal names, polarity, and ground reference before wiring because DTE and DCE conventions differ. Maintain adequate clearance from high-voltage circuits and use a qualified connector shield. The 250 kbps capability is more than adequate for many legacy serial protocols, subject to cable limitations.

🧩

Instrumentation and Sensor Gateway

The MAX232EING4 suits remote instrumentation and sensor gateways that exchange configuration or status data over RS-232. Its dual channels support receive and transmit functions on one interface, and the industrial temperature range allows operation in uncontrolled equipment rooms and production cells. The bipolar driver levels allow communication with legacy sensors and controllers that lack modern differential interfaces. Designers should treat the RS-232 connection as a point-to-point link unless the complete system has been designed for multidrop behavior. Keep the transceiver away from motors and switching regulators, reference the interface ground correctly, and validate signal integrity with the longest cable and highest baud rate planned for deployment.

📱

Service and Diagnostic Equipment

The MAX232EING4 is useful in portable service tools and field-diagnostic equipment that connects to older RS-232-controlled subsystems. The device requires only a 5 V rail, reducing system complexity compared with discrete bipolar driver networks. Two transmitters and two receivers allow diagnostic commands to be sent while responses or status lines are monitored. Its -40 °C to +85 °C range supports operation across industrial ambient conditions. The interface still requires careful attention to connector wiring, cable shielding, and logic polarity. Use the manufacturer’s pin and charge-pump capacitor tables directly during layout, and place the interface connector near the transceiver to minimize exposed high-impedance RS-232 traces.

⚡

Industrial Control and Automation

The MAX232EING4 can provide a robust legacy serial port in industrial controllers, remote I/O modules, and automated test systems. The -40 °C to +85 °C operating range and ±2 kV ESD protection make it suitable as an interface component in controlled industrial environments, although additional surge protection may be needed for exposed cables. Its 5 V supply and integrated charge pumps simplify system power design while delivering ±9 V RS-232 output capability. Pair the device with correctly specified logic thresholds and a stable ground reference. Confirm that the controller’s UART supports the selected baud rate and protocol framing, and test the assembled interface with production cable lengths to identify loading or grounding issues early.

What are the key specifications of MAX232EING4 that engineers should know?
The MAX232EING4 is a dual-channel RS-232 transceiver designed for 5 V systems, with two drivers, two receivers, a maximum data rate of 250 kbps, and ±9 V output capability. According to the Texas Instruments MAX232 product page, the device also provides ±2 kV ESD protection on its RS-232 interfaces. It is supplied in a 16-pin PDIP package and is specified for an industrial temperature range of -40 °C to +85 °C.
What is the operating voltage of MAX232EING4?
The MAX232EING4 operates from a 5 V supply. The Texas Instruments MAX232 product page identifies the MAX232 family as a 5 V dual-channel RS-232 line driver and receiver. The IC generates the positive and negative RS-232 signaling voltages internally through charge-pump circuits, but the logic-side interface and the device itself still require a stable 5 V supply.
Where can I download the MAX232EING4 datasheet PDF?
The official MAX232EING4 documentation is available through the Texas Instruments MAX232 product page at https://www.ti.com/product/MAX232. That page links the manufacturer datasheet, ordering information, quality documents, and design resources for the MAX232 family. For a physical replacement, confirm that the selected ordering option specifies a PDIP-16 package and the required industrial temperature grade.
Where can I find the MAX232EING4 pinout?
Use the pin-description table and package drawing in the Texas Instruments MAX232 datasheet to identify every MAX232EING4 pin and its electrical function. The MAX232EING4 uses a 16-pin PDIP outline with numbered pins, power pins, driver outputs, receiver inputs, and external charge-pump capacitor connections. The manufacturer product page at https://www.ti.com/product/MAX232 provides access to the relevant documents and ordering information.
What can replace MAX232EING4?
The closest replacements are MAX232-compatible RS-232 transceivers offered in the same 16-pin PDIP footprint and designed around the same bipolar charge-pump interface. MAX232EPE, MAX232EANG4, MAX232CPE, and SP232P are listed as candidates, but each must be checked for temperature grade, supply voltage, data rate, capacitor values, and exact pin assignment. MAX232EPE and MAX232EANG4 are the closest same-family choices when the industrial temperature qualification of the MAX232EING4 is not required.
Is MAX232EING4 the same as MAX232EPE?
The MAX232EING4 and MAX232EPE use the same MAX232 electrical architecture and can be evaluated as a 16-pin PDIP replacement, but they are not guaranteed to be identical in every ordering characteristic. The principal distinction is the qualification and temperature grade: MAX232EING4 is specified from -40 °C to +85 °C, while MAX232EPE is associated with the commercial-temperature MAX232 option. Verify the exact limit and pin configuration before substitution.
When should I choose MAX232EING4 over MAX232EPE?
Choose MAX232EING4 when the RS-232 interface must operate across the industrial temperature range of -40 °C to +85 °C. MAX232EPE is more appropriate when the same MAX232 function and PDIP footprint are needed only within commercial-temperature operating conditions. Both devices provide dual RS-232 channels from a 5 V supply, so temperature qualification, availability, and exact ordering details should guide the final choice.
Is MAX232EING4 suitable for industrial equipment?
The MAX232EING4 is suitable for industrial temperature applications because its specified operating range is -40 °C to +85 °C. It supports two RS-232 channels at rates up to 250 kbps from a 5 V supply. Industrial suitability still depends on the complete equipment design, including EMC requirements, cable routing, surge protection beyond the specified ±2 kV ESD rating, and the temperature ratings of every other component in the interface.
Where can I buy MAX232EING4 online?
Use the Request a Quote form on this page to request MAX232EING4 availability, current commercial terms, and an appropriate order quantity. The form allows buyers to confirm the exact 16-pin PDIP ordering configuration and obtain current sourcing information without relying on stale marketplace prices. Confirm authorized-channel availability and delivery timing before releasing a production order.
What is the price of MAX232EING4?
Current pricing for MAX232EING4 should be obtained through the Request a Quote form on this page. The form reflects current sourcing conditions and can account for quantity, package configuration, and production requirements. Because component pricing and inventory can change rapidly, request a written quotation for the planned order quantity rather than relying on an outdated historical listing.
What is the lead time for MAX232EING4?
The current lead time for MAX232EING4 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging configuration, inventory position, and production planning. For a new design, use the quoted manufacturing schedule as the baseline and maintain a second sourcing path if an uninterrupted supply is essential.
Is MAX232EING4 in stock?
Stock availability for MAX232EING4 changes with procurement demand and replenishment activity. Submit a Request a Quote request on this page with your required quantity and target delivery date to obtain the current availability confirmation. For production planning, request a dated supply commitment rather than treating a temporary stock indication as a long-term allocation.
What is the difference between MAX232EING4 and MAX232CPE?
The MAX232EING4 and MAX232CPE both implement the familiar dual-channel MAX232 RS-232 interface in a 16-pin PDIP form, but their manufacturer, qualification, and ordering conditions differ. The MAX232EING4 is specified for -40 °C to +85 °C, while the MAX232CPE is a Maxim-family commercial-temperature option. Verify the exact pin functions, external capacitor values, and temperature limits before using one in place of the other.
What is the best Analog Devices equivalent for MAX232EING4?
The closest Analog Devices-family candidate in the MAX232 cross-reference family is the MAX232CPE, which uses a 16-pin PDIP format and provides the same dual-channel RS-232 driver and receiver function from a 5 V supply. It is appropriate for commercial-temperature applications, but it does not provide the same stated -40 °C to +85 °C qualification as the MAX232EING4. Confirm pinout, capacitor values, and production requirements before substitution.
Does MAX232EING4 need external charge-pump capacitors?
The MAX232EING4 requires external charge-pump capacitors to generate the bipolar RS-232 voltage levels. According to the Texas Instruments MAX232 documentation, these capacitors must use the specified values and be connected directly to the designated charge-pump pins. Keep the connections short, place the capacitors close to the IC, and follow the manufacturer’s recommended PCB layout to minimize switching noise and unstable voltage generation.

Mühendislik referans verileri: MAX232EING4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX232EING4 when the design needs a conventional MAX232-compatible interface, a 5 V supply, two drivers, two receivers, and operation from -40 °C to +85 °C. MAX232EPE is the closest same-family candidate when the commercial temperature grade is sufficient, but it should not be used where the full industrial range is required. MAX232EANG4 is another same-package commercial option and is appropriate when its exact ordering and temperature specifications match the product requirements. MAX232CPE offers a similar MAX232 function from another manufacturer, while SP232P may suit cost-sensitive designs after its data rate, temperature range, and capacitor requirements are verified. For every candidate, confirm the 16-pin PDIP footprint, exact pin assignment, charge-pump capacitor values, logic thresholds, and availability before releasing the PCB for production.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX232EPE MAX232EANG4 MAX232CPE SP232P
Manufacturer Texas Instruments Texas Instruments Texas Instruments Analog Devices Exar
Package PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16
Device Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver

Ana Farklılayıcılar

  • Industrial-temperature MAX232 option (karşılaştırma:MAX232EPE)
  • Single 5 V supply implementation (karşılaştırma:MAX232CPE)
  • Four-channel transceiver in a 16-pin PDIP (karşılaştırma:SP232P)

Tasarım Notları

Place the charge-pump capacitors directly beside their corresponding MAX232 pins and keep their return paths short. Follow the manufacturer’s recommended capacitance values and PCB footprint because substituted capacitor types or long loops can increase supply ripple or impair charge-pump operation. Add a low-ESR bypass capacitor close to the 5 V supply pins, and route the RS-232 connector and transceiver interface away from clocks, switching regulators, and high-current return paths.

Do not treat RS-232 as a voltage-drop-tolerant multidrop bus. Point-to-point operation is the preferred configuration, and any multidrop design must be evaluated for receiver loading, threshold overlap, cable length, and grounding. Also verify DTE versus DCE signal names and logic polarity at the connector. A pin-compatible-looking IC is not a safe substitution unless its temperature rating, supply voltage, data rate, receiver thresholds, and external capacitor values have all been checked.

Validate the complete interface using the longest production cable, highest planned baud rate, and worst-case transceiver loading. High-capacitance cables can slow RS-232 edges and cause receiver errors even when the nominal data rate is below 250 kbps. Use a properly referenced signal ground, route the cable through a qualified connector shield, and consider additional surge protection for cables that leave an enclosure or connect to externally accessible equipment.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance status was not established from the available manufacturer and distributor pages. Request current quality and environmental documentation for the exact ordering option before production release.

Veri doğrulanma tarihi: 2026-11-09 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

max232ein datasheet MAX232EING4 datasheet MAX232EING4 pinout MAX232EING4 datasheet pdf MAX232EING4 equivalent MAX232EING4 replacement MAX232EING4 cross reference MAX232EING4 vs MAX232EPE MAX232EING4 PDIP-16 pinout Texas Instruments MAX232EING4 MAX232EING4 RS-232 transceiver MAX232EING4 industrial UART interface MAX232EING4 price MAX232EING4 stock

İlgili Bileşenler ve Terimler

Texas Instruments MAX232EING4 MAX232EPE MAX232EANG4 MAX232CPE SP232P RS-232 RS-232 transceiver line driver line receiver interface IC communications semiconductor CMOS logic TTL logic UART charge-pump voltage converter single-supply interface PDIP-16 through-hole package 250 kbps 5 V power supply ESD protection industrial temperature range bipolar signaling point-to-point serial communication
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle