MAX232MWE/PR-T - 5V Dual RS-232 Transceiver | Maxim
MPN: MAX232MWE/PR-T ✓ AktifMAX232MWE/PR-T Genel Bakış
An RS-232 interface transceiver is an integrated circuit that combines differential line drivers and receivers with charge-pump voltage conversion. The transmitter converts low-voltage logic signals into RS-232 bipolar levels, while the receiver converts bipolar RS-232 signals back into logic-compatible voltages. This integration allows a digital controller or terminal to communicate over a cable using the RS-232 standard.
The MAX232MWE/PR-T offers two drivers and two receivers in one package. Its +5 V operation simplifies designs that already use a 5 V logic supply, while the integrated voltage-generation circuitry avoids a separate external charge-pump supply. The 120 kbps data-rate capability suits legacy serial ports, industrial control equipment, test systems, service interfaces, and embedded systems that still rely on RS-232 rather than modern USB or Ethernet links.
The MAX232MWE/PR-T is identified as a 16-terminal, gull-wing, rectangular surface-mount package with a military temperature grade. The -T suffix distinguishes this ordering configuration from related package and qualification variants. Engineers should consult the manufacturer pin-description table before assigning PCB signals, particularly for charge-pump capacitor connections, supply pins, and the driver and receiver channels.
In a typical circuit, each driver input connects to a host or peripheral UART, while each receiver output connects to a logic input. Place the required charge-pump capacitors close to their associated pins and route RS-232 traces away from sensitive analog or high-speed digital nets. The receiver inputs must connect only to protected RS-232 signal paths, and unused channels require appropriate termination according to the manufacturer application guidance.
This page combines the available manufacturer and distributor identifiers with package, interface, speed, and ordering information. It also highlights practical PCB, signal-integrity, and replacement considerations. Engineers evaluating a migration should confirm pin assignment, electrical limits, temperature range, lifecycle status, and exposed-pad requirements against the manufacturer datasheet rather than relying only on a family-level cross-reference entry.
Drop-in alternatifler için MAX232MWE/PR-T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX232MWE/PR-T (aynı form faktörü ve ayağa oturma) — farklı olan Interface Standard, Product Type, Package, Maximum Data Rate, Supply Voltage.
MAX232EWE+T
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX232ACWE+T
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX232CWE+T
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX232CWE+
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX232MWE/PR-T Özellikler
| Product Type | Dual RS-232 transmitter/receiver interface IC |
| Besleme Gerilimi | +5 V |
| Number of Transmitters | 2 |
| Number of Receivers | 2 |
| Maximum Data Rate | 120 kbps |
| Interface Standard | RS-232 |
| Terminal Count | 16 |
| Package Code | SOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Montaj Türü | Surface mount |
| Temperature Grade | Military |
| Paket | 16-pin SOIC |
| Transceiver Configuration | 2/2 full RS-232 |
MAX232MWE/PR-T Pin Yapısı
| Pin 1 | R1OUT — Voltage converter output; refer to the manufacturer pin-description table |
| Pin 2 | R1IN — Voltage converter input; refer to the manufacturer pin-description table |
| Pin 3 | R2OUT — Voltage converter output; refer to the manufacturer pin-description table |
| Pin 4 | R2IN — Voltage converter input; refer to the manufacturer pin-description table |
| Pin 5 | T1IN — First transmitter logic input |
| Pin 6 | T2IN — Second transmitter logic input |
| Pin 7 | R1OUT — First receiver logic output |
| Pin 8 | R2OUT — Second receiver logic output |
| Pin 9 | R2IN — Second receiver RS-232 input |
| Pin 10 | R1IN — First receiver RS-232 input |
| Pin 11 | T2OUT — Second transmitter RS-232 output |
| Pin 12 | T1OUT — First transmitter RS-232 output |
| Pin 13 | VCC — Positive supply voltage |
| Pin 14 | GND — Ground |
| Pin 15 | C3 — Charge-pump capacitor connection |
| Pin 16 | V+ — Positive charge-pump output |
Tipik Uygulamalar
MAX232MWE/PR-T için uygundur 6 uygulamas: Industrial Serial Service Port, Embedded UART Communication, Test and Measurement Instrumentation, Telecommunications Equipment, Point-of-Sale and Peripheral Interface, Data Acquisition and Control.
Industrial Serial Service Port
The MAX232MWE/PR-T fits legacy industrial equipment that retains an RS-232 diagnostic or configuration port. Its two transmitters and two receivers support bidirectional communication, while the 120 kbps maximum data rate is appropriate for command consoles, firmware downloads, and supervisory data rather than continuous high-volume transfer. The 16-pin SOIC package supports compact surface-mount assemblies, and the military temperature-grade ordering code suits equipment evaluated for harsh operating environments. Confirm the exact operating-temperature endpoints and logic levels against the manufacturer datasheet before laying out the interface.
Önerilen
Embedded UART Communication
The MAX232MWE/PR-T can connect a microcontroller or processor UART to a legacy RS-232 port because it includes both logic-side drivers and receive channels. A 120 kbps ceiling gives adequate margin for typical console traffic, instrument commands, and short data packets while providing compatibility with established RS-232 equipment. Keep the UART signal traces short, place the required charge-pump capacitors near the device, and route the external cable-side pins away from sensitive logic. Verify voltage compatibility and receiver thresholds before connecting equipment with unusual RS-232 levels.
Önerilen
Test and Measurement Instrumentation
The MAX232MWE/PR-T is appropriate for test and measurement instruments that retain a PC-style RS-232 control interface. Its dual-channel arrangement allows two device outputs or inputs to be supported in one package, and the 120 kbps rate is sufficient for command-and-response instruments, legacy analyzers, and laboratory fixtures. The 16-pin SOIC footprint simplifies board updates when a through-hole interface arrangement must be replaced with surface mounting. Confirm driver and receiver voltage limits in the datasheet, and provide cable-side transient protection according to the equipment's exposure to electrostatic discharge.
Önerilen
Telecommunications Equipment
The MAX232MWE/PR-T can support legacy telecommunications equipment that uses RS-232 for local craft interfaces, terminal configuration, or equipment-to-equipment links. The dual transmitter and receiver arrangement reduces the number of interface components, while the 120 kbps data rate is adequate for control traffic rather than broadband payloads. Its military temperature-grade ordering configuration can support designs evaluated across severe temperature ranges, provided the manufacturer limits are checked. Maintain separation between external RS-232 routes and high-speed internal nets, and use appropriate grounding and cable shielding.
Önerilen
Point-of-Sale and Peripheral Interface
The MAX232MWE/PR-T is suitable for older point-of-sale terminals, peripheral controllers, and service equipment that communicate through RS-232. Two transmit and receive channels support common single-port and multi-port arrangements, while the 120 kbps rate is more than sufficient for receipt printers, scanners, and configuration links used at low transaction volumes. The surface-mount SOIC package is convenient for redesigns of older through-hole boards. Review the driver slew rate and receiver response in the datasheet, and ensure unused inputs and outputs are configured according to the manufacturer guidance.
Önerilen
Data Acquisition and Control
The MAX232MWE/PR-T can bridge RS-232 control commands between a data-acquisition unit and a host computer. Its 120 kbps rate supports configuration exchanges, status reporting, and intermittent measurements without consuming the entire bandwidth of a modern bus. The dual transceiver arrangement offers flexibility when a system uses separate command and data channels. Place input and output grounding carefully, keep charge-pump loops compact, and isolate external cable transients. Before production release, verify the receiver threshold, output levels, and operating-temperature range against the exact manufacturer documentation.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX232MWE/PR-T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX232EWE+T | MAX232ACWE+T | MAX232CWE+T | MAX232CWE |
|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Package | 16-pin SOIC | 16-pin SOIC - same | 16-pin SOIC - same | 16-pin SOIC - same | 16-pin SOIC - same |
| Transceiver Configuration | 2 transmitters and 2 receivers | Dual RS-232 driver/receiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver |
| Maximum Data Rate | 120 kbps | 200 kbps | 200 kbps | 200 kbps | 200 kbps |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Transmitter Count | 2 | 2 | 2 | 2 | 2 |
| Receiver Count | 2 | 2 | 2 | 2 | 2 |
| Ordering Suffix | MWE/PR-T | EWE+T | ACWE+T | CWE+T | CWE |
Ana Farklılayıcılar
- Military temperature-grade ordering configuration (karşılaştırma:MAX232CWE+T)
- Documented 120 kbps operating class (karşılaştırma:MAX232ACWE+T)
- Same dual-channel architecture in a common 16-pin SOIC footprint (karşılaştırma:MAX232EWE+T)
Tasarım Notları
Place the voltage-conversion capacitors directly between the converter pins named in the manufacturer datasheet and minimize loop area. The indexed component information does not specify capacitor values or voltage ratings, so do not select those values from a generic MAX232 reference. Keep the charge-pump routing away from receiver inputs, UART logic traces, and external cable connections to reduce coupled switching noise.
Separate logic-side nets from RS-232 cable-side nets where practical. Treat the transmitter outputs and receiver inputs as external-facing signal paths, and provide clean grounding between the interface circuit and the system reference plane. Do not rely on package similarity alone when reusing a layout: verify every pin number, especially converter and charge-pump connections, against the exact manufacturer pin table.
Do not substitute a 200 kbps MAX232-family part solely because it uses a 16-pin SOIC package. The documented alternatives provide a 66.7% higher data-rate rating, and ordering suffixes can also change qualification or temperature attributes. Confirm pin compatibility, supply voltage, receiver thresholds, operating-temperature range, and lifecycle status before approving a replacement.
Uyumluluk Bilgisi
The component is classified as an RS-232 interface transceiver. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact ordering configuration.