Maxim Integrated

MAX232MWE/PR-T - 5V Dual RS-232 Transceiver | Maxim

MPN: MAX232MWE/PR-T ✓ Aktif
+5 V Vdss SOP Package
MOQ: 1 |

MAX232MWE/PR-T Ringkasan

The Maxim Integrated MAX232MWE/PR-T is a +5 V powered dual RS-232 transmitter and receiver interface IC packaged in a 16-pin SOIC for surface-mount assemblies. It provides two transmit channels and two receive channels for converting between TTL/CMOS logic levels and EIA/TIA-232 signals. The device supports RS-232 data rates up to 120 kbps and is specified for military temperature-grade applications.

An RS-232 interface transceiver is an integrated circuit that combines differential line drivers and receivers with charge-pump voltage conversion. The transmitter converts low-voltage logic signals into RS-232 bipolar levels, while the receiver converts bipolar RS-232 signals back into logic-compatible voltages. This integration allows a digital controller or terminal to communicate over a cable using the RS-232 standard.

The MAX232MWE/PR-T offers two drivers and two receivers in one package. Its +5 V operation simplifies designs that already use a 5 V logic supply, while the integrated voltage-generation circuitry avoids a separate external charge-pump supply. The 120 kbps data-rate capability suits legacy serial ports, industrial control equipment, test systems, service interfaces, and embedded systems that still rely on RS-232 rather than modern USB or Ethernet links.

The MAX232MWE/PR-T is identified as a 16-terminal, gull-wing, rectangular surface-mount package with a military temperature grade. The -T suffix distinguishes this ordering configuration from related package and qualification variants. Engineers should consult the manufacturer pin-description table before assigning PCB signals, particularly for charge-pump capacitor connections, supply pins, and the driver and receiver channels.

In a typical circuit, each driver input connects to a host or peripheral UART, while each receiver output connects to a logic input. Place the required charge-pump capacitors close to their associated pins and route RS-232 traces away from sensitive analog or high-speed digital nets. The receiver inputs must connect only to protected RS-232 signal paths, and unused channels require appropriate termination according to the manufacturer application guidance.

This page combines the available manufacturer and distributor identifiers with package, interface, speed, and ordering information. It also highlights practical PCB, signal-integrity, and replacement considerations. Engineers evaluating a migration should confirm pin assignment, electrical limits, temperature range, lifecycle status, and exposed-pad requirements against the manufacturer datasheet rather than relying only on a family-level cross-reference entry.

Alternatif penggantian untuk MAX232MWE/PR-T — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX232MWE/PR-T (sama faktor bentuk dan footprint) — berbeda di dalam Interface Standard, Product Type, Package, Maximum Data Rate, Supply Voltage.

Analog Devices
Interface Standard: EIA/TIA-232E, V.28 and V.24
Product Type: Dual RS-232 line transceiver
Package: SOIC-16W, 16 pins
Analog Devices
Interface Standard: RS-232; EIA/TIA-232E and V.28/V.24 family application
Product Type: RS-232 line driver/receiver transceiver
Package: 16-pin wide SOIC
Analog Devices
Interface Standard: EIA/TIA-232E, V.28, and V.24
Product Type: RS-232 line-driver and receiver transceiver
Package: 16-pin wide SOIC (WSOIC)
Maxim Integrated
Interface Standard: EIA/TIA-232E
Product Type: RS-232 transceiver interface IC
Package: 16-pin wide SOIC

MAX232EWE+T

✅ Drop-In
Maxim Integrated
📦 16-pin SOIC
RS-232 transceiver interface IC · 2 drivers · 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 and V.24 · +5 V

Kontak untuk harga

Lihat Datasheet →

MAX232ACWE+T

✅ Drop-In
Analog Devices
📦 16-pin SOIC
Dual RS-232 line transceiver · 2 · 2 · 116 kbps · 5.5 V · EIA/TIA-232E, V.28 and V.24 · Full duplex · CMOS

Kontak untuk harga

Lihat Datasheet →

MAX232CWE+T

✅ Drop-In
Analog Devices
📦 16-pin SOIC
RS-232 line-driver and receiver transceiver · 2 · 2 · Full duplex · 120 kbps · +5 V · EIA/TIA-232E, V.28, and V.24 · 16-pin wide SOIC (WSOIC)

Kontak untuk harga

Lihat Datasheet →

MAX232CWE+

✅ Drop-In
Analog Devices
📦 16-pin SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

Kontak untuk harga

Lihat Datasheet →

MAX232MWE/PR-T Spesifikasi

Product Type Dual RS-232 transmitter/receiver interface IC
Tegangan Pemuat +5 V
Number of Transmitters 2
Number of Receivers 2
Maximum Data Rate 120 kbps
Interface Standard RS-232
Terminal Count 16
Package Code SOP
Package Shape Rectangular
Terminal Form Gull wing
Tipe Mounting Surface mount
Temperature Grade Military
Paket 16-pin SOIC
Transceiver Configuration 2/2 full RS-232

Konfigurasi Pin MAX232MWE/PR-T

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin produk 1 R1OUT — Voltage converter output; refer to the manufacturer pin-description table
Pin produk 2 R1IN — Voltage converter input; refer to the manufacturer pin-description table
Pin produk 3 R2OUT — Voltage converter output; refer to the manufacturer pin-description table
Pin produk 4 R2IN — Voltage converter input; refer to the manufacturer pin-description table
Pin produk 5 T1IN — First transmitter logic input
Pin produk 6 T2IN — Second transmitter logic input
Pin produk 7 R1OUT — First receiver logic output
Pin produk 8 R2OUT — Second receiver logic output
Pin produk 9 R2IN — Second receiver RS-232 input
Pin produk 10 R1IN — First receiver RS-232 input
Pin produk 11 T2OUT — Second transmitter RS-232 output
Pin produk 12 T1OUT — First transmitter RS-232 output
Pin produk 13 VCC — Positive supply voltage
Pin produk 14 GND — Ground
Pin produk 15 C3 — Charge-pump capacitor connection
Pin produk 16 V+ — Positive charge-pump output

Aplikasi Umum

MAX232MWE/PR-T cocok untuk 6 aplikasis: Industrial Serial Service Port, Embedded UART Communication, Test and Measurement Instrumentation, Telecommunications Equipment, Point-of-Sale and Peripheral Interface, Data Acquisition and Control.

🏭

Industrial Serial Service Port

The MAX232MWE/PR-T fits legacy industrial equipment that retains an RS-232 diagnostic or configuration port. Its two transmitters and two receivers support bidirectional communication, while the 120 kbps maximum data rate is appropriate for command consoles, firmware downloads, and supervisory data rather than continuous high-volume transfer. The 16-pin SOIC package supports compact surface-mount assemblies, and the military temperature-grade ordering code suits equipment evaluated for harsh operating environments. Confirm the exact operating-temperature endpoints and logic levels against the manufacturer datasheet before laying out the interface.

🧩

Embedded UART Communication

The MAX232MWE/PR-T can connect a microcontroller or processor UART to a legacy RS-232 port because it includes both logic-side drivers and receive channels. A 120 kbps ceiling gives adequate margin for typical console traffic, instrument commands, and short data packets while providing compatibility with established RS-232 equipment. Keep the UART signal traces short, place the required charge-pump capacitors near the device, and route the external cable-side pins away from sensitive logic. Verify voltage compatibility and receiver thresholds before connecting equipment with unusual RS-232 levels.

🔧

Test and Measurement Instrumentation

The MAX232MWE/PR-T is appropriate for test and measurement instruments that retain a PC-style RS-232 control interface. Its dual-channel arrangement allows two device outputs or inputs to be supported in one package, and the 120 kbps rate is sufficient for command-and-response instruments, legacy analyzers, and laboratory fixtures. The 16-pin SOIC footprint simplifies board updates when a through-hole interface arrangement must be replaced with surface mounting. Confirm driver and receiver voltage limits in the datasheet, and provide cable-side transient protection according to the equipment's exposure to electrostatic discharge.

🌐

Telecommunications Equipment

The MAX232MWE/PR-T can support legacy telecommunications equipment that uses RS-232 for local craft interfaces, terminal configuration, or equipment-to-equipment links. The dual transmitter and receiver arrangement reduces the number of interface components, while the 120 kbps data rate is adequate for control traffic rather than broadband payloads. Its military temperature-grade ordering configuration can support designs evaluated across severe temperature ranges, provided the manufacturer limits are checked. Maintain separation between external RS-232 routes and high-speed internal nets, and use appropriate grounding and cable shielding.

🖥️

Point-of-Sale and Peripheral Interface

The MAX232MWE/PR-T is suitable for older point-of-sale terminals, peripheral controllers, and service equipment that communicate through RS-232. Two transmit and receive channels support common single-port and multi-port arrangements, while the 120 kbps rate is more than sufficient for receipt printers, scanners, and configuration links used at low transaction volumes. The surface-mount SOIC package is convenient for redesigns of older through-hole boards. Review the driver slew rate and receiver response in the datasheet, and ensure unused inputs and outputs are configured according to the manufacturer guidance.

📟

Data Acquisition and Control

The MAX232MWE/PR-T can bridge RS-232 control commands between a data-acquisition unit and a host computer. Its 120 kbps rate supports configuration exchanges, status reporting, and intermittent measurements without consuming the entire bandwidth of a modern bus. The dual transceiver arrangement offers flexibility when a system uses separate command and data channels. Place input and output grounding carefully, keep charge-pump loops compact, and isolate external cable transients. Before production release, verify the receiver threshold, output levels, and operating-temperature range against the exact manufacturer documentation.

What is the MAX232MWE/PR-T?
The MAX232MWE/PR-T is a +5 V, dual-channel RS-232 interface transceiver from Maxim Integrated. It combines two line drivers and two receivers in a 16-pin SOIC package and converts between logic-level signals and RS-232 differential levels. According to the manufacturer product information, the device supports data rates up to 120 kbps and is intended for military temperature-grade equipment.
Where can I download the MAX232MWE/PR-T datasheet PDF?
The MAX232MWE/PR-T datasheet PDF is available through the MAX232MWE/PR-T technical-document listing on Datasheets.com. The indexed document identifies the part as a dual transmitter and receiver in a 16-pin SOIC package. Use the manufacturer pin-description table and electrical characteristics for final design decisions, especially when assigning charge-pump capacitors and checking absolute maximum ratings.
Where can I find the MAX232MWE/PR-T pinout?
The MAX232MWE/PR-T uses a 16-pin SOIC, and its numbered pin functions are shown in the manufacturer datasheet and the package pin-description table. Connect the exact power, ground, charge-pump capacitor, transmitter, and receiver pins according to that table rather than inferring connections from another MAX232 variant. The indexed component information confirms 16 terminals and a gull-wing surface-mount package.
What are the key specifications of MAX232MWE/PR-T that engineers should know?
The MAX232MWE/PR-T is a +5 V dual RS-232 transceiver with two transmitters, two receivers, a maximum data rate of 120 kbps, and a 16-pin SOIC package. The ordering configuration is also identified as military temperature grade and surface mount. Use the datasheet to confirm voltage limits, temperature endpoints, capacitance requirements, and receiver performance before releasing a production layout.
How does MAX232MWE/PR-T compare with MAX232CWE+T?
The MAX232MWE/PR-T and MAX232CWE+T are both dual RS-232 transceivers in 16-pin SOIC packages, but their specified data rates differ. The cross-reference data identifies MAX232MWE/PR+ at 120 kbps and MAX232CWE+T at 200 kbps, making the MAX232MWE/PR-T the slower choice. Confirm pin compatibility and all operating limits before substituting one for the other.
Is MAX232CWE+T better than MAX232MWE/PR-T for high-speed RS-232?
The MAX232CWE+T is better when the interface must operate above the MAX232MWE/PR-T's 120 kbps rating. The indexed comparison identifies MAX232CWE+T as a 200 kbps dual RS-232 transceiver, a 66.7% rate increase over 120 kbps. Both use a 16-pin SOIC package, but engineers should still verify pin functions, supply requirements, and operating-temperature details before replacing the target device.
When should I choose MAX232MWE/PR-T over MAX232ACWE+T?
Choose MAX232MWE/PR-T when the system needs a +5 V, 120 kbps RS-232 interface in a 16-pin SOIC package and does not require the higher 200 kbps capability associated with MAX232ACWE+T. The MAX232ACWE+T offers a 66.7% higher data rate, while the MAX232MWE/PR-T is identified as military temperature grade. Validate the complete operating envelope before selection.
Is MAX232MWE/PR-T suitable for industrial automation equipment?
The MAX232MWE/PR-T is suitable for legacy RS-232 service ports and low-to-moderate-speed serial links in industrial equipment. Its 120 kbps maximum data rate is sufficient for configuration consoles, diagnostic interfaces, and supervisory communication rather than high-throughput data transfer. The military temperature-grade marking also supports harsh-temperature design evaluation, subject to the manufacturer's operating-temperature limits.
What is the best drop-in replacement for MAX232MWE/PR-T?
The closest documented drop-in candidates are the MAX232EWE+T, MAX232ACWE+T, and MAX232CWE+T because each is a 16-pin SOIC dual RS-232 transceiver. No candidate is electrically identical across all ratings: the documented alternatives support up to 200 kbps, while MAX232MWE/PR-T is rated at 120 kbps. Verify pinout, temperature grade, and electrical limits before selecting a replacement.
Can MAX232EWE+T replace MAX232MWE/PR-T?
The MAX232EWE+T can serve as a candidate replacement because it is described as a +5 V, 16-pin SOIC multichannel RS-232 driver and receiver. It is not a confirmed identical substitute: the available cross-reference identifies the MAX232EWE+T as a 200 kbps device, while the MAX232MWE/PR-T is listed at 120 kbps. Compare receiver thresholds, slew behavior, and temperature limits before direct substitution.
What can replace MAX232MWE/PR-T in a legacy serial port?
A legacy serial port can use the MAX232CWE+T or MAX232ACWE+T when the PCB accepts a 16-pin SOIC dual RS-232 transceiver and the interface operates within 200 kbps. The MAX232MWE/PR-T is rated at 120 kbps, while the documented replacements provide higher maximum rates. A board-level qualification should confirm pinout, temperature grade, supply behavior, and protection requirements.
Is MAX232MWE/PR-T the same as MAX232CWE?
The MAX232MWE/PR-T and MAX232CWE are related MAX232-family RS-232 transceivers, but they are not confirmed identical for every ordering attribute. The target is a military-temperature-grade 16-pin SOIC configuration rated at 120 kbps, while the cross-reference also identifies MAX232CWE as a replace-part candidate with a different ordering suffix. Check the exact package, temperature grade, and lead configuration before treating them as interchangeable.
Where can I buy MAX232MWE/PR-T online?
The MAX232MWE/PR-T can be requested through XAIPART's Request a Quote form on this page. The form is the appropriate route for current unit availability, order quantity, and lead-time confirmation because commercial conditions change frequently. The component is listed for a 16-pin SOIC package, +5 V operation, dual RS-232 channels, and military temperature grade.
What is the price of MAX232MWE/PR-T?
The current unit price for MAX232MWE/PR-T is not stated as a fixed figure on this page. Submit the MPN and required quantity through XAIPART's Request a Quote form to obtain a current quotation. The documented part identity includes the +5 V dual RS-232 configuration, 120 kbps data rate, 16-pin SOIC package, military temperature grade, and tape-and-reel ordering suffix.
What is the lead time and stock status for MAX232MWE/PR-T?
Current stock and lead time for MAX232MWE/PR-T should be confirmed through XAIPART's Request a Quote form on this page. The part is identified as a +5 V, 120 kbps dual RS-232 transceiver in a 16-pin SOIC package with a military temperature grade. Supply status and production scheduling should not be inferred from search listings because inventory can change without notice.
How should the MAX232MWE/PR-T charge-pump capacitors be placed?
Place the MAX232MWE/PR-T charge-pump capacitors close to the pins identified in the manufacturer datasheet and keep their return paths short and compact. Follow the manufacturer-recommended capacitance and voltage rating exactly, and avoid routing the switching node beneath sensitive receive or logic traces. Because the indexed material does not state the capacitor values, use the datasheet's typical application circuit rather than estimating them.

Data referensi engineering untuk MAX232MWE/PR-T — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MAX232MWE/PR-T when the design requires a +5 V, dual-channel RS-232 interface, a maximum rate of 120 kbps, and a military temperature-grade 16-pin SOIC ordering configuration. It is appropriate for legacy service ports, embedded UART links, and industrial control interfaces where data traffic is modest. The MAX232CWE+T, MAX232ACWE+T, and MAX232EWE+T are reasonable candidates when the same 16-pin footprint is needed and the higher documented 200 kbps rate is useful. Their higher speed does not automatically make them better: receiver thresholds, temperature grade, ordering suffix, and lifecycle conditions must also meet the design requirements. MAX232CWE may fit a related configuration, but its complete operating envelope is less explicit in the indexed information. For every candidate, compare the exact pin table and electrical characteristics before committing to a drop-in replacement.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MAX232EWE+T MAX232ACWE+T MAX232CWE+T MAX232CWE
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 16-pin SOIC 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same
Transceiver Configuration 2 transmitters and 2 receivers Dual RS-232 driver/receiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Maximum Data Rate 120 kbps 200 kbps 200 kbps 200 kbps 200 kbps
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount
Transmitter Count 2 2 2 2 2
Receiver Count 2 2 2 2 2
Ordering Suffix MWE/PR-T EWE+T ACWE+T CWE+T CWE

Diferensiator Kunci

  • Military temperature-grade ordering configuration (vsMAX232CWE+T)
  • Documented 120 kbps operating class (vsMAX232ACWE+T)
  • Same dual-channel architecture in a common 16-pin SOIC footprint (vsMAX232EWE+T)

Catatan Desain

Place the voltage-conversion capacitors directly between the converter pins named in the manufacturer datasheet and minimize loop area. The indexed component information does not specify capacitor values or voltage ratings, so do not select those values from a generic MAX232 reference. Keep the charge-pump routing away from receiver inputs, UART logic traces, and external cable connections to reduce coupled switching noise.

Separate logic-side nets from RS-232 cable-side nets where practical. Treat the transmitter outputs and receiver inputs as external-facing signal paths, and provide clean grounding between the interface circuit and the system reference plane. Do not rely on package similarity alone when reusing a layout: verify every pin number, especially converter and charge-pump connections, against the exact manufacturer pin table.

Do not substitute a 200 kbps MAX232-family part solely because it uses a 16-pin SOIC package. The documented alternatives provide a 66.7% higher data-rate rating, and ordering suffixes can also change qualification or temperature attributes. Confirm pin compatibility, supply voltage, receiver thresholds, operating-temperature range, and lifecycle status before approving a replacement.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The component is classified as an RS-232 interface transceiver. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact ordering configuration.

Pencarian Terkait

MAX232MWE/PR-T datasheet MAX232MWE/PR-T pinout MAX232MWE/PR-T datasheet pdf MAX232MWE/PR-T equivalent MAX232MWE/PR-T replacement MAX232MWE/PR-T cross reference MAX232MWE/PR-T vs MAX232CWE+T MAX232MWE/PR-T 16 pin SOIC MAX232MWE/PR-T 120 kbps MAX232MWE/PR-T RS-232 transceiver MAX232MWE/PR-T industrial automation MAX232MWE/PR-T price MAX232MWE/PR-T stock Maxim MAX232MWE/PR-T

Komponen dan Istilah Terkait

Maxim Integrated MAX232MWE/PR-T MAX232EWE+T MAX232ACWE+T MAX232CWE+T MAX232CWE RS-232 RS-232 interface transceiver line driver line receiver transceiver IC interface IC semiconductor 16-pin SOIC SOIC family surface mount SMD TTL CMOS EIA/TIA-232 V.28 V.24 charge-pump voltage converter 120 kbps military temperature grade
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ