Analog Devices

MAX232ACWE+T - 116kbps Dual RS-232 Transceiver | Analog Devices

MPN: MAX232ACWE+T ✓ Aktif
5.5 V Vdss SOIC-16W, 16 pins Package
MOQ: 1 |

MAX232ACWE+T Genel Bakış

The Analog Devices MAX232ACWE+T is a dual RS-232 line transceiver with two drivers and two receivers, a maximum data rate of 116 kbps, and operation from a 5.5 V supply. The device is housed in a 16-pin wide SOIC-16W surface-mount package and is supplied in tape-and-reel packaging. It is intended for EIA/TIA-232E and V.28/V.24 serial interfaces where ±12 V is unavailable.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into digital logic levels. Within the signal-chain hierarchy, the MAX232 belongs to the RS-232 interface transceiver class, combining transmitter, receiver, and voltage-generation functions in one package. This integration allows a compact equipment port to communicate with legacy serial equipment without requiring a separate external charge-pump supply.

The MAX232ACWE+T provides two transmit channels and two receive channels in one device. Its listed 116 kbps data rate is suitable for conventional asynchronous serial communication rather than high-speed differential buses such as RS-485. The 5.5 V supply requirement permits operation in systems where only a positive 5 V rail is readily available. Its dual-channel organization also reduces component count when two RS-232 ports must share the same logic interface.

The MAX232 family is designed for EIA/TIA-232E and V.28/V.24 communication interfaces, including equipment where ±12 V cannot be supplied. The integrated line-driver and receiver functions provide the electrical interface between CMOS/TTL-compatible logic and RS-232 lines. Device variants exist in multiple package and temperature options, so engineers should confirm the exact ordering suffix when matching a board footprint and environmental requirement.

Typical uses include industrial control consoles, laboratory instrumentation, point-of-sale equipment, service interfaces, embedded serial ports, and data-acquisition systems. A two-driver, two-receiver arrangement is especially useful when one equipment enclosure must support two independent RS-232 links or combine full-duplex operation on two ports.

PCB design should preserve the pin arrangement defined by the SOIC-16W footprint and follow the capacitor and charge-pump guidance in the manufacturer data sheet. Keep the interface connector, protection network, and transceiver on a controlled impedance-free point-to-point RS-232 path, and provide suitable grounding rather than relying on the logic ground as a substitute for a proper cable shield connection.

This page combines the exact MAX232ACWE+T ordering information, verified manufacturer specifications, sourcing guidance, interface-use guidance, and a careful review of drop-in alternatives. It is intended to help engineers identify the correct package variant, evaluate replacement options, and implement a robust RS-232 interface without overlooking footprint or qualification differences.

Drop-in alternatifler için MAX232ACWE+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX232ACWE+T (aynı form faktörü ve ayağa oturma) — farklı olan Interface Standard, Maximum Data Rate, Mounting Type, Package, Product Type.

Maxim Integrated
Interface Standard: RS-232
Maximum Data Rate: 120 kbps
Mounting Type: Surface mount
MaxLinear
Mounting Type: Surface mount (SMD/SMT)

MAX232AEWE+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 SOIC-16W
Both devices provide two transmitters and two receivers at 116 kbps; the alternative has a different temperature-grade suffix, while the channel count and data-rate difference are 0.

📋 Katalogda Olmayan Referans Alternatifi

SP3232EBCN-L/TR

✅ Yerleştirme
MaxLinear
📦 SOIC-16
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ Stokta

$0.7711 / Birim

Veri Şablonunu Görüntüle →

MAX232ACWE+T Özellikler

Product Type Dual RS-232 line transceiver
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 116 kbps
Besleme Gerilimi 5.5 V
Interface Standard EIA/TIA-232E, V.28 and V.24
Duplex Mode Full duplex
Logic Compatibility CMOS
Paket SOIC-16W, 16 pins
Montaj Stili Surface mount
Shipping Package Tape and reel

MAX232ACWE+T tape and reel Pin Yapısı Kılavuzu

MAX232ACWE+T (tape and reel paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

tape and reel paket pin çizelgesi için MAX232ACWE+T

Ayrıntılı pin çıkış verisi mevcut değil: MAX232ACWE+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX232ACWE+T için uygundur 6 uygulamas: Industrial Control Console, Laboratory Test Instrument, Point-of-Sale Terminal, Data Acquisition Equipment, Embedded Serial Gateway, Service and Diagnostics Port.

🏭

Industrial Control Console

The MAX232ACWE+T fits a console interface that must communicate with legacy RS-232 equipment through one full-duplex link and one additional channel. Its two drivers and two receivers provide the required transmit and receive paths while its 116 kbps rate matches conventional asynchronous serial-control traffic. The 5.5 V supply is useful in industrial controllers that already generate a positive 5 V rail. Place the IC near the connector and connect the charge-pump capacitors according to the manufacturer data sheet to keep the switching-generated supply ripple away from sensitive logic. Confirm the ordering suffix temperature range for the intended enclosure and add connector-side surge protection when the interface leaves the controlled equipment area.

🔧

Laboratory Test Instrument

A laboratory instrument can use the MAX232ACWE+T to connect a controller or embedded system to a PC-based service port without requiring a separate negative supply. Two channels allow independent command and diagnostic links, while the listed 116 kbps rate is suitable for configuration exchange and status polling rather than continuous bulk transfer. The integrated receiver and driver circuitry simplifies the logic-side interface, but the external cable still requires appropriate ESD and surge protection. Keep the ground reference and cable-shield strategy defined by the instrument architecture, and verify that the 5.5 V supply remains within the operating limits listed for the exact ordering suffix.

🖥️

Point-of-Sale Terminal

The MAX232ACWE+T is suitable for a point-of-sale or service terminal that connects a main board to a peripheral through RS-232. The two transmitters and two receivers can support two serial paths, such as a primary peripheral and an auxiliary device, while the 116 kbps rate covers command traffic, receipt data, and configuration updates of moderate length. Because point-of-sale equipment may share power with motors, displays, and scanners, route the transceiver and charge-pump return current carefully. Place the interface protection close to the connector, and use the manufacturer's capacitor configuration to prevent power-supply disturbance from affecting the logic interface.

📡

Data Acquisition Equipment

The MAX232ACWE+T can provide a compact PC-to-instrument data-acquisition link when the transfer consists of commands and sampled status records rather than sustained high-rate streaming. The 116 kbps maximum rate establishes the practical ceiling for the RS-232 channel, while two channels can separate a control command path from a data-response path. The 5.5 V supply is convenient for a 5 V instrument architecture. Preserve the specified charge-pump capacitor placement and keep the RS-232 traces away from high-gain analog input paths. If the acquisition system requires continuous high-throughput transfer or galvanic isolation, select an interface architecture with a higher data rate or an isolated digital link.

🌐

Embedded Serial Gateway

An embedded gateway can use the MAX232ACWE+T when it must bridge modern logic to one or two legacy RS-232 ports. The dual transmitter and receiver arrangement allows a compact converter to support two physical serial links, and the 116 kbps rate is appropriate for configuration, diagnostic, and supervisory protocols. The device's 5.5 V requirement can simplify integration into a 5 V industrial or communications design. Treat the RS-232 connector as an electrically harsh boundary by placing suitable protection at the connector entry. Confirm the exact pin functions, capacitor connections, and package footprint against the manufacturer data sheet before adapting an existing gateway board.

🔧

Service and Diagnostics Port

The MAX232ACWE+T fits a service port intended for configuration, firmware-log, and diagnostic access on embedded equipment. At 116 kbps, it supports ordinary terminal sessions and short text-based logs while limiting the host software's timeout and flow-control complexity. Two channels provide flexibility for separating service traffic from another RS-232 function. In a compact enclosure, exposed connector pins can receive ESD events, so add protection appropriate to the installation while retaining a short protected route to the transceiver. Validate the ground reference to avoid injecting surge current into the logic ground and follow the manufacturer data sheet for capacitor placement and supply decoupling.

What is the MAX232ACWE+T?
The MAX232ACWE+T is a +5 V-powered, dual RS-232 transceiver from Analog Devices with two transmitters, two receivers, a maximum signaling rate of 116 kbps, and a 16-pin SOIC-16W package. According to the MAX232 manufacturer data sheet, the MAX220–MAX249 family is intended for EIA/TIA-232E and V.28/V.24 interfaces where ±12 V is not available.
What are the key specifications of MAX232ACWE+T that engineers should know?
The MAX232ACWE+T combines two RS-232 drivers and two receivers in a 16-pin SOIC-16W package. Its principal listed ratings are a 116 kbps maximum data rate, 5.5 V supply operation, full-duplex operation, and CMOS logic compatibility. The Analog Devices MAX232 family targets EIA/TIA-232E, V.28, and V.24 interfaces, allowing a positive 5 V system to communicate with conventional RS-232 equipment.
Where can I download the MAX232ACWE+T datasheet PDF?
The MAX232ACWE+T data sheet is available through the Analog Devices MAX232 product page at https://www.analog.com/en/products/MAX232.html. The page provides the manufacturer documentation and ordering information for the MAX232 family. Engineers should use the data sheet's package, capacitor, charge-pump, electrical-characteristics, and ordering-information sections to confirm the requirements for the exact MAX232ACWE+T suffix.
Where can I find the MAX232ACWE+T pinout?
Use the pin-description table and package drawing in the Analog Devices MAX232 manufacturer data sheet to identify every MAX232ACWE+T connection. The device has 16 pins in an SOIC-16W package, with signal names and power connections assigned to the numbered pads. Use that pin-description table when assigning PCB tracks, especially for charge-pump capacitor connections, supply decoupling, driver outputs, and receiver inputs.
What is the difference between MAX232ACWE+T and MAX232EWE+T?
The MAX232EWE+T is listed as a higher-slew-rate MAX232 variant operating at 200 kbps, while the MAX232ACWE+T is listed at 116 kbps. Both are associated with the MAX232 family and 16-pin SOIC-style options, but the 84 kbps data-rate difference is substantial. For a circuit operating near 116 kbps, verify both the speed rating and the exact package dimensions before treating the E variant as a replacement.
What is the best cross-brand equivalent for MAX232ACWE+T?
The MaxLinear cross-reference identifies the SP3232EBCN-L as a pin-compatible functional equivalent to the MAX232ACWE+. It is rated for 250 kbps and includes 15 kV ESD protection, compared with the MAX232ACWE+T's listed 116 kbps rate. Confirm the physical package width, capacitor arrangement, ESD requirements, and shutdown behavior in each manufacturer data sheet before approving it as a board-level drop-in replacement.
Can SP3232EBCN-L replace MAX232ACWE+T?
The SP3232EBCN-L is identified as a pin-compatible functional equivalent to the MAX232ACWE+, but a direct substitution still requires footprint and functional verification. Its listed 250 kbps rate exceeds the MAX232ACWE+T's 116 kbps rate, and it provides 15 kV ESD protection. Confirm that both devices use the same physical lead width, identical charge-pump capacitor connections, and equivalent shutdown and supply behavior.
When should I choose MAX232ACWE+T over a higher-speed alternative?
Choose the MAX232ACWE+T when the interface is a conventional asynchronous RS-232 link operating at or below 116 kbps and the design requires the established MAX232ACWE+ footprint and function. A higher-speed alternative may be appropriate for burst throughput or shorter transfer times, but increased edge rate can require additional signal-integrity and EMC validation. The MAX232ACWE+T is generally the more conservative choice when compatibility with the original MAX232 design is primary.
Is MAX232ACWE+T suitable for industrial control equipment?
The MAX232ACWE+T is suitable for RS-232 interface sections of industrial equipment when the required temperature grade, ESD protection, isolation, and grounding method are satisfied by the complete design. The device itself provides two 116 kbps RS-232 channels on a 5.5 V supply. For harsh industrial ports, add the necessary surge and ESD protection and use an isolated or protected interface strategy where the application requires it.
How is the MAX232ACWE+T used in a serial interface?
Connect one MAX232ACWE+T transmitter to the outgoing logic signal and its receiver to the incoming logic signal for a full-duplex RS-232 port. A second driver and receiver support another channel on the same device. Power the IC from 5.5 V, connect the charge-pump capacitors exactly as shown in the manufacturer data sheet, and route the external line signals to the connector through the required protection network.
What can replace MAX232ACWE+T?
The strongest documented cross-brand candidate is the MaxLinear SP3232EBCN-L, which the manufacturer cross-reference labels pin compatible and functionally equivalent to the MAX232ACWE+. Its 250 kbps data rate exceeds the target's 116 kbps, while its listed 15 kV ESD protection is a useful enhancement. A replacement should still undergo package-width, capacitor, shutdown, and pin-definition checks before production use.
Is MAX232ACWE+T the same as MAX232EWE+T?
No. The MAX232ACWE+T is listed at 116 kbps, whereas the MAX232EWE+T is listed at 200 kbps and is described as a higher-slew-rate variant. They belong to the same MAX232 product family, but that family relationship does not erase the 84 kbps operating-speed difference. Check the exact package dimensions and all functional options before considering an interchange.
Where can I buy MAX232ACWE+T online?
Use the Request a Quote form on this page to request MAX232ACWE+T pricing, stock confirmation, and current lead time. The exact orderable configuration is the MAX232ACWE+T suffix in a 16-pin SOIC-16W tape-and-reel package. Confirm the full MPN when requesting a quotation so that the commercial response is tied to the required package, temperature grade, and shipping configuration.
What is the price of MAX232ACWE+T?
Current pricing for MAX232ACWE+T should be requested through the Request a Quote form on this page. The structured price information is refreshed as market availability changes, so a fixed figure should not be embedded in technical guidance. When requesting a quote, specify the exact MAX232ACWE+T MPN, quantity, and tape-and-reel shipment requirements.
What is the lead time and stock status for MAX232ACWE+T?
Request current stock, lead time, and minimum order quantity through the Request a Quote form on this page. Availability can change independently of the device's lifecycle status, and the manufacturer's product page confirms that the MAX232 family remains in production. The quote request should include the exact MAX232ACWE+T suffix, annual and prototype quantities, and the requested delivery location.

Mühendislik referans verileri: MAX232ACWE+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX232ACWE+T when rebuilding or sourcing a conventional 116 kbps RS-232 interface in the SOIC-16W footprint, particularly when maintaining the original MAX232ACWE+ function is important. The MAX232AEWE+T is the closest same-brand family choice when its environmental ordering suffix matches the equipment, because it retains the same two-channel structure and 116 kbps operating class. Consider the SP3232EBCN-L when a cross-brand redesign can accept a higher-rate interface and when its 15 kV ESD protection is valuable; nevertheless, confirm physical lead spacing, capacitor connections, pin functions, supply behavior, and shutdown logic. Avoid using a higher-slew-rate MAX232EWE+T as an automatic substitution, because its 200 kbps rate changes the electrical edge behavior. For any new design, validate the complete interface with the target cable length, grounding method, connector protection, and system power sequence rather than evaluating only the IC specifications.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX232AEWE+T SP3232EBCN-L
Package SOIC-16W SOIC-16W SOIC-16
Brand Analog Devices Analog Devices MaxLinear
Maximum Data Rate 116 kbps 116 kbps 250 kbps
Number of Drivers 2 2 2
Number of Receivers 2 2 2
Duplex Mode Full duplex Full duplex Full duplex

Ana Farklılayıcılar

  • Two complete RS-232 channels in one package (karşılaştırma:MAX232AEWE+T)
  • Cross-brand option with documented pin compatibility (karşılaştırma:SP3232EBCN-L)
  • Established 116 kbps operating class (karşılaştırma:MAX232EWE+T)

Tasarım Notları

Follow the manufacturer data sheet exactly when placing the charge-pump capacitors and supply bypass components. These components must be connected to the designated pins without long intervening traces, because long loops increase radiated noise and coupling into adjacent logic. Confirm that the PCB land pattern is SOIC-16W rather than a narrower 16-pin SOIC footprint; the two packages can have similar pin counts but different lead spacing and body widths.

Do not select MAX232EWE+T solely because it belongs to the same family. Its listed 200 kbps rate is 84 kbps higher than the MAX232ACWE+T's 116 kbps rate, indicating a different slew-rate profile. A higher edge rate can increase ringing and EMI on imperfectly terminated cables. Preserve the original MAX232ACWE+T operating mode when conducting a direct substitution review.

Treat the connector and transceiver as one protected interface region. Place any connector-side TVS or surge-protection elements before the transceiver pins, provide a low-impedance ground return for surge current, and keep unprotected RS-232 traces away from sensitive analog and clock paths. Check the external line-driver and receiver enable or shutdown functions against the system power sequence so that no driver is active while the interface state is uncertain.

RS-232 is a point-to-point cable interface, not a terminated high-speed bus. Nevertheless, faster edge rates can reveal reflections, ringing, and common-mode susceptibility. Use a short, appropriately shielded cable, connect the signal reference and shield according to the equipment grounding strategy, and avoid long unprotected traces inside the enclosure. Validate edge-rate-dependent behavior with an oscilloscope and representative cable lengths when substituting a higher-speed device.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The Exact MAX232ACWE+T ordering suffix was not identified as RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliant in the cited pages. Confirm these attributes in the current manufacturer product declaration or material declaration for the exact part.

İlgili Aramalar

MAX232ACWE+T datasheet MAX232ACWE+T pinout MAX232ACWE+T datasheet pdf MAX232ACWE+T equivalent MAX232ACWE+T replacement MAX232ACWE+T cross reference MAX232ACWE+T price MAX232ACWE+T stock Analog Devices MAX232ACWE+T MAX232ACWE+T SOIC-16W footprint MAX232ACWE+T vs SP3232EBCN-L MAX232ACWE+T application circuit

İlgili Bileşenler ve Terimler

Analog Devices Maxim Integrated MAX232ACWE+T MAX232ACWE+ MAX232AEWE+T MAX232EWE+T SP3232EBCN-L RS-232 EIA/TIA-232E V.28 V.24 line transceiver interface IC RS-232 driver RS-232 receiver CMOS logic full duplex 116 kbps 5.5 V supply SOIC-16W surface mount charge-pump capacitor industrial control data acquisition point-of-sale terminal
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle