Analog Devices

MAX3232EEAE+T - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232EEAE+T ✓ Aktif
3.0V to 5.5V Vdss Down to 10nA Id 16-SSOP Package
MOQ: 1 |

MAX3232EEAE+T Genel Bakış

The Analog Devices MAX3232EEAE+T is a true RS-232 transceiver containing two line drivers and two line receivers in a 16-pin SSOP package. It operates from a 3.0V to 5.5V supply, supports data rates up to 1Mbps, and provides ESD protection up to ±15kV on the serial-port pins. The integrated dual charge-pump supply generates the bipolar voltage levels required by true RS-232 drivers.

A true RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the transceiver hierarchy within interface ICs and power-management support functions, enabling reliable point-to-point communication between a host controller and an external serial device.

The MAX3232EEAE+T combines a 2-driver and 2-receiver configuration, a 1Mbps maximum signaling rate, and low-power operation from 3.0V to 5.5V. Its ±15kV ESD protection helps improve reliability in industrial, instrumentation, and communications equipment where a protected cable or connector may be exposed to electrostatic discharge. The 16-SSOP package also supports compact surface-mount PCB layouts.

The device uses an integrated charge-pump architecture to generate the positive and negative voltages required for compliant RS-232 output signaling. Because the charge pumps and drivers operate continuously, power dissipation depends on supply voltage, data activity, load impedance, cable length, and the rate of data transitions. The MAX3232E family is designed to meet TIA/EIA-232-F requirements and provides the electrical interface between asynchronous communication controllers and serial connectors.

Typical applications include industrial control consoles, barcode and data-acquisition equipment, test and measurement instruments, point-of-sale terminals, and embedded systems using RS-232 links. The two-driver and two-receiver arrangement suits bidirectional point-to-point communication or split unidirectional links. The 1Mbps capability supports high-speed legacy serial equipment where greater baud rates and shorter-distance signaling are required.

Decoupling capacitors must be placed close to the charge-pump and supply pins, while the RS-232 connector-side traces should be routed to minimize noise coupling into sensitive logic. External protection can still be required for long cables or severe industrial environments because the integrated ±15kV rating does not remove the need for suitable enclosure, grounding, and cable design.

This product page combines the MAX3232EEAE+T operating characteristics, verified package information, family drop-in options, application guidance, and design considerations to help engineers evaluate the device before integrating a compact, low-power RS-232 interface.

Drop-in alternatifler için MAX3232EEAE+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3232EEAE+T (aynı form faktörü ve ayağa oturma) — farklı olan Package, Supply Voltage Range, Maximum Data Rate, Number of Drivers, Number of Receivers.

Analog Devices
Package: 16-SSOP, 5.30 mm width
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 1 Mbps
İle Karşılaştır MAX3232EEAE+T →
Analog Devices
Package: 16-pin TSSOP
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 1 Mbps
İle Karşılaştır MAX3232EEAE+T →
Analog Devices
Package: 16-pin SSOP (CAE)
Supply Voltage Range: 3.0 V to 5.5 V
İle Karşılaştır MAX3232EEAE+T →
Analog Devices
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 1 Mbps
Number of Drivers: 2
İle Karşılaştır MAX3232EEAE+T →

MAX3232ECAE+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 16-SSOP
RS-232 Transceiver · 2 / 2 · RS-232 (EIA/TIA-232, V.28/V.24) · 3.0 V to 5.5 V · Up to 1 Mbps (250 kbps minimum guaranteed) · ±15 kV IEC 61000-4-2 air-gap, ±15 kV HBM · 10 nA (typ) · 0°C to +70°C (C grade)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232ECUE+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 16-SSOP
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · True RS-232 · ±15 kV · Low-power operation

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232CAE+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 16-SSOP
2/2 full RS-232 transceiver · 2 drivers · 2 receivers · 3.0 V to 5.5 V · 1 Mbps · RS-232 · 4 × 0.1 µF · 16-SSOP, 5.30 mm width

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232CUE+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 16-SSOP
2/2 transceiver, full RS-232 · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · 4 × 0.1 µF · 16-pin TSSOP · Surface mount

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232EUE+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 16-SSOP
2/2 RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · 300 µA · 0.1 µF each · 4

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232EEAE+T Özellikler

Product Type RS-232 transceiver
Line Drivers 2
Line Receivers 2
Interface Direction Full duplex
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
ESD Protection ±15kV
Low-Power Shutdown Supply Current Down to 10nA
Transceiver Configuration 2/2
Signaling Standard True RS-232
Paket 16-SSOP
Montaj Türü Surface mount
Integrated Charge Pumps 2

MAX3232EEAE+T 16-ssop Pin Yapısı Kılavuzu

MAX3232EEAE+T (16-ssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-ssop paket pin çizelgesi için MAX3232EEAE+T

Ayrıntılı pin çıkış verisi mevcut değil: MAX3232EEAE+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3232EEAE+T için uygundur 6 uygulamas: Industrial Control Console, Test and Measurement Instrument, Point-of-Sale Terminal, Barcode and Data Acquisition, Embedded Serial Communication, Instrumentation and Maintenance Port.

🏭

Industrial Control Console

The MAX3232EEAE+T fits an industrial control console that connects a controller to a remote operator terminal or service interface. Its two drivers and two receivers support full-duplex point-to-point communication, while the 3.0V to 5.5V operating range allows use with either 3.3V or 5V system rails. The 1Mbps maximum rate supports demanding legacy serial links. Its ±15kV ESD protection improves connector-side resilience, although a production console should still use a shielded cable, chassis grounding, and appropriately rated surge protection.

🔧

Test and Measurement Instrument

The MAX3232EEAE+T is useful for a test and measurement instrument that needs a compact RS-232 control or data port beside an analog or digital acquisition section. The low 3.0V to 5.5V supply range simplifies mixed-voltage logic integration, and the 2/2 arrangement permits bidirectional command exchange. A 1Mbps ceiling provides useful throughput for legacy instrument protocols. Keep the serial traces away from sensitive analog inputs and follow the manufacturer’s charge-pump capacitor placement to avoid coupling converter noise into the measurement circuitry.

🖥️

Point-of-Sale Terminal

The MAX3232EEAE+T can provide the legacy serial connection between a point-of-sale terminal and a printer, scanner, or customer-display interface. Two drivers and two receivers are sufficient for typical point-to-point links, while the 16-SSOP package keeps the interface compact. Operation from 3.0V to 5.5V supports common embedded processor rails, and the ±15kV ESD rating is valuable around frequently serviced external connectors. Cable selection and connector grounding remain important because the transceiver rating does not eliminate system-level transient exposure.

🧩

Barcode and Data Acquisition

The MAX3232EEAE+T is appropriate for barcode scanners, laboratory data loggers, and equipment that exchanges commands with a host over RS-232. Its full-duplex 2/2 organization supports simultaneous transmit and receive paths, while the 3.0V to 5.5V supply range provides flexibility in embedded systems. The 1Mbps maximum rate can accommodate high-speed legacy protocols over short distances. For long cables, use a low-capacitance shielded cable and validate the complete channel because baud rate, loading, and connector geometry influence practical reach.

📱

Embedded Serial Communication

The MAX3232EEAE+T suits embedded systems that retain an RS-232 port for service, configuration, diagnostics, or connection to legacy equipment. Its 3.0V to 5.5V operating range can be aligned with common embedded processor I/O supplies, and the compact 16-SSOP package simplifies routing on a mixed-signal board. The 2/2 channel count allows two RS-232 links or separate transmit and receive paths. Place charge-pump capacitors near their assigned pins and route connector-side traces away from clocks, sensors, and precision analog inputs.

⚡

Instrumentation and Maintenance Port

The MAX3232EEAE+T works well as a maintenance or configuration interface in industrial instrumentation exposed to electrically noisy environments. Its ±15kV ESD protection strengthens the serial connector interface, and the 2/2 full-duplex arrangement supports command and diagnostic channels. The 1Mbps capability allows modern control software to communicate rapidly with older equipment. Use a properly bonded chassis or enclosure ground, keep external cables away from high-energy conductors, and verify the exact operating-temperature grade before using the device in temperature-extreme installations.

What is the MAX3232EEAE+T?
The MAX3232EEAE+T is a 2/2 full-duplex RS-232 transceiver with two line drivers, two line receivers, and an operating supply range of 3.0V to 5.5V. According to the Analog Devices MAX3232E product page, the device supports true RS-232 signaling at data rates up to 1Mbps and includes ±15kV ESD protection on the serial-port connections. The MAX3232EEAE+T is assembled in a compact 16-SSOP surface-mount package.
Where can I download the MAX3232EEAE+T datasheet PDF?
The official MAX3232EEAE+T documentation is available through the Analog Devices MAX3232E product page at https://www.analog.com/en/products/max3232e.html. The manufacturer page identifies the MAX3232E family as production devices and links to the data sheet, which covers the 2/2 transceiver configuration, 3.0V to 5.5V operation, ±15kV ESD protection, and operation up to 1Mbps. Use the manufacturer document for final pin, limit, and application-circuit decisions.
What is the maximum data rate of MAX3232EEAE+T?
The MAX3232EEAE+T supports a maximum data rate of 1Mbps. Analog Devices describes the MAX3232E family as true RS-232 transceivers with two drivers and two receivers operating from 3.0V to 5.5V. This speed is useful for high-rate legacy serial links, but actual sustainable throughput also depends on cable length, connector integrity, baud-rate tolerance, and the signal-integrity margin of the complete RS-232 channel.
How much ESD protection does the MAX3232EEAE+T provide?
The MAX3232EEAE+T provides ±15kV ESD protection on the serial-port connection pins. The Analog Devices MAX3232E product page identifies the device as a ±15kV ESD-protected true RS-232 transceiver. This rating improves tolerance to electrostatic discharge, but it should not be interpreted as unlimited surge protection; long external cables, poorly grounded connectors, and severe industrial transients may still require dedicated external protection.
What is the supply voltage range of MAX3232EEAE+T?
The MAX3232EEAE+T operates from 3.0V to 5.5V. This range allows it to use either a regulated 3.3V rail or a conventional 5V logic supply. According to the Analog Devices MAX3232E documentation, the integrated charge pumps generate the bipolar voltage levels needed for true RS-232 signaling while the logic side remains compatible with a 3.3V or 5V system.
Is the MAX3232EEAE+T a full-duplex RS-232 transceiver?
Yes, the MAX3232EEAE+T is a 2/2 full-duplex RS-232 transceiver. It contains two line drivers and two line receivers, allowing simultaneous transmit and receive paths in a point-to-point implementation. Analog Devices specifies the device as a true RS-232 interface that operates from 3.0V to 5.5V and supports signaling up to 1Mbps in a 16-SSOP package.
Where to buy MAX3232EEAE+T online?
Use the Request a Quote form on this page to inquire about the MAX3232EEAE+T, current availability, order quantity, and delivery scheduling. The exact ordering code includes the +T reel packaging suffix, so confirm that the quoted MPN is MAX3232EEAE+T rather than MAX3232EEAE or a non-reel variant. The manufacturer lists the MAX3232E family as production, supporting long-term sourcing planning.
What is the price of MAX3232EEAE+T?
Current commercial terms for MAX3232EEAE+T are available through the Request a Quote form on this page. Submit the exact MPN, required quantity, and target delivery location so the order can be evaluated against the reel packaging and requested schedule. The 2/2 transceiver, 3.0V to 5.5V supply range, and 1Mbps capability identify the requested configuration without ambiguity.
What is the lead time for MAX3232EEAE+T?
The current lead time for MAX3232EEAE+T should be confirmed through the Request a Quote form on this page. Include the required quantity, reel packaging requirement, and intended delivery date in the request. Analog Devices identifies the MAX3232E family as production, which supports planned sourcing, while individual lead times can vary with order volume and manufacturing conditions.
Is MAX3232EEAE+T in stock?
Request an availability confirmation for MAX3232EEAE+T using the Request a Quote form on this page. Because the order is fulfilled against the exact ordering code and requested quantity, the confirmation should cover the +T packaging suffix, current stock position, and expected dispatch timing. The Analog Devices product page identifies the MAX3232E family as production.
MAX3232EEAE+T vs MAX3232EEAE+ - which is the correct ordering code?
MAX3232EEAE+T is the tape-and-reel ordering variant, while MAX3232EEAE+ denotes the corresponding non-reel order form. Both identify the same MAX3232EEAE electrical configuration in the 16-SSOP package. The Analog Devices MAX3232E family provides two drivers, two receivers, 3.0V to 5.5V operation, ±15kV ESD protection, and operation up to 1Mbps; packaging is the relevant ordering distinction.
When should I choose MAX3232EEAE+T over MAX3232ECAE+T?
Choose MAX3232EEAE+T when the design requires the MAX3232E family operating characteristics in the MAX3232EEAE ordering configuration. Both are 2/2 true RS-232 transceivers rated for 3.0V to 5.5V operation, ±15kV ESD protection, and data rates up to 1Mbps. The selection should therefore focus on the exact temperature grade, lifecycle status, and internal-device ordering code confirmed for each part number.
Is MAX3232EEAE+T suitable for an industrial RS-232 interface?
The MAX3232EEAE+T is suitable for many industrial RS-232 interfaces because it provides true RS-232 operation, 3.0V to 5.5V supply flexibility, ±15kV ESD protection, and a 1Mbps maximum data rate. Industrial suitability also depends on the confirmed operating-temperature grade, enclosure, grounding, cable routing, and connector protection. Use the ordering information and datasheet limits for the exact MAX3232EEAE+T variant before releasing the design.
What can replace MAX3232EEAE+T?
A suitable replacement must use the same 16-SSOP footprint, remain pin-to-pin compatible, and preserve the essential 2-driver, 2-receiver, 3.0V to 5.5V, and 1Mbps operating parameters. Same-family MAX3232E options can provide this footprint, but temperature grade and ordering suffix must still be checked. A separate manufacturer’s device should be selected only after its pinout and electrical characteristics have been verified against the manufacturer data sheet.
Is MAX3232EEAE+T the same as MAX3232ECAE+T?
No, MAX3232EEAE+T and MAX3232ECAE+T are related MAX3232 family members rather than identical ordering codes. Both use the 16-SSOP format and provide a 2/2 RS-232 interface for 3.0V to 5.5V operation at rates up to 1Mbps, with ±15kV ESD protection. Confirm the exact temperature grade and suffix for each ordering code because those characteristics determine whether one can directly replace the other.
What are the key specifications of MAX3232EEAE+T that engineers should know?
The MAX3232EEAE+T combines two drivers, two receivers, full-duplex true RS-232 operation, a 3.0V to 5.5V supply range, and a maximum data rate of 1Mbps. Analog Devices also specifies ±15kV ESD protection and a 16-SSOP package. These characteristics place it in the low-power interface-IC category for compact point-to-point serial equipment, although cable length, grounding, and external surge protection remain system-level considerations.
What is the best cross-brand equivalent for MAX3232EEAE+T?
The best cross-brand equivalent is the device whose 16-SSOP pinout matches every charge-pump, supply, driver, receiver, and ground connection while maintaining the required 2/2 configuration, 3.0V to 5.5V supply range, and 1Mbps data rate. No cross-brand drop-in part is established here by a manufacturer cross-reference, so do not substitute an RS-232 device based only on channel count. Validate the candidate against the official MAX3232E data sheet and its own documentation.

Mühendislik referans verileri: MAX3232EEAE+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MAX3232EEAE+T when the design needs a compact, low-power 2/2 true RS-232 interface operating from 3.0V to 5.5V at rates up to 1Mbps, particularly when connector-side ESD robustness is important. MAX3232ECAE+T and MAX3232ECUE+T are same-family choices when their confirmed temperature grades and ordering codes better match production requirements. MAX3232CAE+T and MAX3232CUE+T belong to the related MAX3232C family and provide the same 2/2, 3.0V-to-5.5V, 1Mbps functional envelope, but the exact device limits must be checked before substitution. MAX3232EUE+T is another same-family option with a different ordering suffix. For any candidate, verify the 16-SSOP pin mapping, temperature range, lifecycle status, charge-pump capacitor values, and external protection requirements. Do not select a generic RS-232 transceiver solely because it also has two drivers and two receivers.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3232ECAE+T MAX3232ECUE+T MAX3232CAE+T MAX3232CUE+T MAX3232EUE+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP
Transceiver Configuration 2/2 2/2 2/2 2/2 2/2 2/2
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Maximum Data Rate 1Mbps 1Mbps 1Mbps 1Mbps 1Mbps 1Mbps
ESD Protection ±15kV ±15kV ±15kV ±15kV ±15kV ±15kV
Interface Direction Full duplex Full duplex Full duplex Full duplex Full duplex Full duplex
Low-Power Shutdown Supply Current Down to 10nA Down to 10nA Down to 10nA Down to 10nA Down to 10nA Down to 10nA

Ana Farklılayıcılar

  • Full 2/2 interface in a compact 16-SSOP package (karşılaştırma:MAX3232ECAE+T)
  • Supports modern embedded supply rails (karşılaştırma:MAX3232CUE+T)
  • Connector-side transient resilience (karşılaştırma:MAX3232CAE+T)

Tasarım Notları

Place the required charge-pump and bypass capacitors immediately beside their associated MAX3232EEAE+T pins, using the manufacturer application circuit as the layout reference. Keep the connector-side driver and receiver traces short and isolate them from clocks, switching nodes, and precision analog inputs. The charge-pump node carries fast transitions, so extending its copper path can increase radiated noise and coupling into nearby circuits.

Do not treat the ±15kV ESD rating as a substitute for a complete surge-protection strategy. Long RS-232 cables can collect industrial transients, and a connector may route them directly to the transceiver pins. Confirm the exact operating-temperature grade, observe all absolute-maximum limits, and add suitable external protection when the cable leaves the controlled enclosure or crosses between buildings.

Provide a low-impedance ground return for both the logic system and the cable shield. Avoid sharing narrow ground paths between the transceiver and noisy motors, relays, or power converters. For low-power shutdown designs, verify that the shutdown control state and its leakage requirements match the host controller. The device can reach a shutdown supply current down to 10nA, but a practical system value also depends on leakage elsewhere on the rail.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The exact MAX3232EEAE+T compliance declarations are not stated on the listed pages; verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation before release.

İlgili Aramalar

MAX3232EEAE+T datasheet MAX3232EEAE+T pinout MAX3232EEAE+T datasheet pdf MAX3232EEAE+T price MAX3232EEAE+T stock MAX3232EEAE+T equivalent MAX3232EEAE+T replacement MAX3232EEAE+T 16-SSOP MAX3232EEAE+T 1Mbps RS-232 MAX3232EEAE+T industrial interface MAX3232EEAE+T vs MAX3232ECAE+T Analog Devices MAX3232EEAE+T

İlgili Bileşenler ve Terimler

Analog Devices Maxim Integrated MAX3232EEAE+T MAX3232ECAE+T MAX3232ECUE+T MAX3232CAE+T MAX3232CUE+T MAX3232EUE+T RS-232 transceiver interface IC line driver line receiver true RS-232 dual charge pump TIA/EIA-232-F ESD protection 3.0V to 5.5V supply 1Mbps data rate 16-SSOP SSOP family surface-mount technology full-duplex communication industrial control test and measurement
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle