MAX3232EEAE+T - 1Mbps RS-232 Transceiver | Analog Devices
料号: MAX3232EEAE+T ✓ 量产中MAX3232EEAE+T 概述
A true RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the transceiver hierarchy within interface ICs and power-management support functions, enabling reliable point-to-point communication between a host controller and an external serial device.
The MAX3232EEAE+T combines a 2-driver and 2-receiver configuration, a 1Mbps maximum signaling rate, and low-power operation from 3.0V to 5.5V. Its ±15kV ESD protection helps improve reliability in industrial, instrumentation, and communications equipment where a protected cable or connector may be exposed to electrostatic discharge. The 16-SSOP package also supports compact surface-mount PCB layouts.
The device uses an integrated charge-pump architecture to generate the positive and negative voltages required for compliant RS-232 output signaling. Because the charge pumps and drivers operate continuously, power dissipation depends on supply voltage, data activity, load impedance, cable length, and the rate of data transitions. The MAX3232E family is designed to meet TIA/EIA-232-F requirements and provides the electrical interface between asynchronous communication controllers and serial connectors.
Typical applications include industrial control consoles, barcode and data-acquisition equipment, test and measurement instruments, point-of-sale terminals, and embedded systems using RS-232 links. The two-driver and two-receiver arrangement suits bidirectional point-to-point communication or split unidirectional links. The 1Mbps capability supports high-speed legacy serial equipment where greater baud rates and shorter-distance signaling are required.
Decoupling capacitors must be placed close to the charge-pump and supply pins, while the RS-232 connector-side traces should be routed to minimize noise coupling into sensitive logic. External protection can still be required for long cables or severe industrial environments because the integrated ±15kV rating does not remove the need for suitable enclosure, grounding, and cable design.
This product page combines the MAX3232EEAE+T operating characteristics, verified package information, family drop-in options, application guidance, and design considerations to help engineers evaluate the device before integrating a compact, low-power RS-232 interface.
直接替换替代料: MAX3232EEAE+T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3232EEAE+T (相同外形与封装尺寸) ——差异在于 Package, Supply Voltage Range, Maximum Data Rate, Number of Drivers, Number of Receivers.
MAX3232ECAE+T
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX3232ECUE+T
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX3232CAE+T
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX3232CUE+T
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX3232EUE+T
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX3232EEAE+T 规格参数
| Product Type | RS-232 transceiver |
| Line Drivers | 2 |
| Line Receivers | 2 |
| Interface Direction | Full duplex |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| ESD Protection | ±15kV |
| Low-Power Shutdown Supply Current | Down to 10nA |
| Transceiver Configuration | 2/2 |
| Signaling Standard | True RS-232 |
| 封装 | 16-SSOP |
| 安装类型 | Surface mount |
| Integrated Charge Pumps | 2 |
MAX3232EEAE+T 16-ssop 引脚配置指南
MAX3232EEAE+T(16-ssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3232EEAE+T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3232EEAE+T 适用于 6 应用s: Industrial Control Console, Test and Measurement Instrument, Point-of-Sale Terminal, Barcode and Data Acquisition, Embedded Serial Communication, Instrumentation and Maintenance Port.
Industrial Control Console
The MAX3232EEAE+T fits an industrial control console that connects a controller to a remote operator terminal or service interface. Its two drivers and two receivers support full-duplex point-to-point communication, while the 3.0V to 5.5V operating range allows use with either 3.3V or 5V system rails. The 1Mbps maximum rate supports demanding legacy serial links. Its ±15kV ESD protection improves connector-side resilience, although a production console should still use a shielded cable, chassis grounding, and appropriately rated surge protection.
推荐
Test and Measurement Instrument
The MAX3232EEAE+T is useful for a test and measurement instrument that needs a compact RS-232 control or data port beside an analog or digital acquisition section. The low 3.0V to 5.5V supply range simplifies mixed-voltage logic integration, and the 2/2 arrangement permits bidirectional command exchange. A 1Mbps ceiling provides useful throughput for legacy instrument protocols. Keep the serial traces away from sensitive analog inputs and follow the manufacturer’s charge-pump capacitor placement to avoid coupling converter noise into the measurement circuitry.
推荐
Point-of-Sale Terminal
The MAX3232EEAE+T can provide the legacy serial connection between a point-of-sale terminal and a printer, scanner, or customer-display interface. Two drivers and two receivers are sufficient for typical point-to-point links, while the 16-SSOP package keeps the interface compact. Operation from 3.0V to 5.5V supports common embedded processor rails, and the ±15kV ESD rating is valuable around frequently serviced external connectors. Cable selection and connector grounding remain important because the transceiver rating does not eliminate system-level transient exposure.
推荐
Barcode and Data Acquisition
The MAX3232EEAE+T is appropriate for barcode scanners, laboratory data loggers, and equipment that exchanges commands with a host over RS-232. Its full-duplex 2/2 organization supports simultaneous transmit and receive paths, while the 3.0V to 5.5V supply range provides flexibility in embedded systems. The 1Mbps maximum rate can accommodate high-speed legacy protocols over short distances. For long cables, use a low-capacitance shielded cable and validate the complete channel because baud rate, loading, and connector geometry influence practical reach.
推荐
Embedded Serial Communication
The MAX3232EEAE+T suits embedded systems that retain an RS-232 port for service, configuration, diagnostics, or connection to legacy equipment. Its 3.0V to 5.5V operating range can be aligned with common embedded processor I/O supplies, and the compact 16-SSOP package simplifies routing on a mixed-signal board. The 2/2 channel count allows two RS-232 links or separate transmit and receive paths. Place charge-pump capacitors near their assigned pins and route connector-side traces away from clocks, sensors, and precision analog inputs.
推荐
Instrumentation and Maintenance Port
The MAX3232EEAE+T works well as a maintenance or configuration interface in industrial instrumentation exposed to electrically noisy environments. Its ±15kV ESD protection strengthens the serial connector interface, and the 2/2 full-duplex arrangement supports command and diagnostic channels. The 1Mbps capability allows modern control software to communicate rapidly with older equipment. Use a properly bonded chassis or enclosure ground, keep external cables away from high-energy conductors, and verify the exact operating-temperature grade before using the device in temperature-extreme installations.
推荐
推荐产品汇总
工程参考数据: MAX3232EEAE+T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX3232ECAE+T | MAX3232ECUE+T | MAX3232CAE+T | MAX3232CUE+T | MAX3232EUE+T |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP |
| Transceiver Configuration | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps | 1Mbps | 1Mbps | 1Mbps | 1Mbps | 1Mbps |
| ESD Protection | ±15kV | ±15kV | ±15kV | ±15kV | ±15kV | ±15kV |
| Interface Direction | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex |
| Low-Power Shutdown Supply Current | Down to 10nA | Down to 10nA | Down to 10nA | Down to 10nA | Down to 10nA | Down to 10nA |
关键差异点
- Full 2/2 interface in a compact 16-SSOP package (对比 MAX3232ECAE+T)
- Supports modern embedded supply rails (对比 MAX3232CUE+T)
- Connector-side transient resilience (对比 MAX3232CAE+T)
设计说明
Place the required charge-pump and bypass capacitors immediately beside their associated MAX3232EEAE+T pins, using the manufacturer application circuit as the layout reference. Keep the connector-side driver and receiver traces short and isolate them from clocks, switching nodes, and precision analog inputs. The charge-pump node carries fast transitions, so extending its copper path can increase radiated noise and coupling into nearby circuits.
Do not treat the ±15kV ESD rating as a substitute for a complete surge-protection strategy. Long RS-232 cables can collect industrial transients, and a connector may route them directly to the transceiver pins. Confirm the exact operating-temperature grade, observe all absolute-maximum limits, and add suitable external protection when the cable leaves the controlled enclosure or crosses between buildings.
Provide a low-impedance ground return for both the logic system and the cable shield. Avoid sharing narrow ground paths between the transceiver and noisy motors, relays, or power converters. For low-power shutdown designs, verify that the shutdown control state and its leakage requirements match the host controller. The device can reach a shutdown supply current down to 10nA, but a practical system value also depends on leakage elsewhere on the rail.
合规信息
The exact MAX3232EEAE+T compliance declarations are not stated on the listed pages; verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation before release.