MAX3384ECWN+ - 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3384ECWN+ ✓ AktifMAX3384ECWN+ Genel Bakış
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 levels back into digital logic. It belongs to the transceiver hierarchy within interface ICs, providing the physical signaling layer between data-processing equipment and a cable-connected peripheral or system. The MAX3384ECWN+ implements the EIA/TIA-232 and V.28/V.24 signaling requirements described for this device family.
The principal features include operation from a 3.0V to 5.5V supply, operation up to 250kbps, two transmit outputs, two receive inputs, and enhanced ESD protection. Low-power requirements make the device suitable for systems in which interface circuitry must coexist with low-voltage digital logic. The manufacturer describes protection on both transmitter outputs and receiver inputs, which is important when cables may be connected, disconnected, or exposed to electrostatic discharge.
The MAX3384ECWN+ combines true RS-232 line-driver and receiver functions in one integrated circuit. Its powered-down behavior reduces power consumption when the associated subsystem is inactive. Because the interface operates from a single low-voltage supply while generating compliant RS-232 levels, it can simplify designs that would otherwise require separate external line drivers, receivers, and protection networks.
Typical uses include industrial control consoles, point-of-sale terminals, test equipment, instrumentation, and embedded systems that communicate with RS-232 peripherals through cables. The 250kbps capability is useful for moderate-speed serial links, while the integrated two-channel transmitter and receiver arrangement reduces the number of components required for bidirectional or multiport serial interfaces.
The principal design consideration is the difference between RS-232 and TTL-level signaling. The MAX3384ECWN+ is intended for the RS-232 side of the connection; it does not directly accept or produce standard TTL or CMOS logic levels. Layout should preserve short return paths and appropriate grounding, while external protection and cable-length considerations should follow the manufacturer's interface guidance.
This product page combines the device's core electrical characteristics, verified package information, practical application guidance, and documented same-family replacement options. It also distinguishes true pin-compatible alternatives from broader RS-232 interface products that may use a different package, voltage rating, feature set, or channel arrangement.
Drop-in alternatifler için MAX3384ECWN+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX3384ECWN+ (aynı form faktörü ve ayağa oturma) — farklı olan Maximum Data Rate, Supply Voltage Range, Device Type, Interface Standard, Number of Pins.
MAX3384ECAP
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX3384EEAP
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX3384ECWN+ Özellikler
| Technology | RS-232 |
| Device Type | Transceiver |
| Channel Configuration | 2/2 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| Transmitter Channels | 2 |
| Receiver Channels | 2 |
| Logic Standard | EIA/TIA-232 and V.28/V.24 |
| ESD Protection | 15kV |
| İşletim Sıcaklığı | 0C to 70C |
| Package Type | SSOP-20 |
| Package Dimensions | 5.30mm long with 0.65mm pitch |
| Pin Sayısı | 20 pins |
| Montaj Türü | Surface Mount |
| Power Requirements | Low power |
MAX3384ECWN+ 5.30mm long with 0.65mm pitch Pin Yapısı Kılavuzu
MAX3384ECWN+ (5.30mm long with 0.65mm pitch paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX3384ECWN+.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX3384ECWN+ için uygundur 6 uygulamas: Industrial Control Consoles, Point-of-Sale Terminals, Test and Measurement Equipment, Embedded Serial Peripheral Interfaces, RS-232 Port Expansion, Instrumentation and Data Acquisition.
Industrial Control Consoles
The MAX3384ECWN+ fits industrial consoles and controller boards that communicate with older RS-232 instruments through cables. Its two transmit channels and two receive channels support bidirectional or multiport serial arrangements without requiring separate line-driver and receiver ICs. Operation from 3.0V to 5.5V supports both 3.3V and 5V control-logic rails, while the 250kbps data rate covers many configuration and status protocols. The 15kV ESD protection improves resilience at connector-facing outputs and inputs, although board-level grounding and cable selection remain important in electrically noisy equipment.
Önerilen
Point-of-Sale Terminals
Point-of-sale terminals often connect receipt printers, scales, scanners, and customer displays through legacy RS-232 ports. The MAX3384ECWN+ combines two drivers and two receivers in one 20-pin SSOP, reducing board area in compact peripheral interfaces. Its low-voltage supply operation allows direct connection to a 3.3V or 5V embedded controller, while the maximum 250kbps rate supports typical transactional serial traffic. The enhanced ESD protection is valuable at user-accessible connectors, but a reliable ground reference and appropriately shielded cable are still necessary for reliable operation.
Önerilen
Test and Measurement Equipment
Laboratory instruments, programmable power supplies, and automated test platforms often retain RS-232 interfaces for legacy computer connections or equipment-to-equipment control. The MAX3384ECWN+ provides a compact two-channel interface for routing command and response signals. Its 250kbps limit is appropriate for many legacy instrumentation protocols, although modern long cables may operate more reliably at lower rates because capacitance and loading increase with frequency. The integrated low-power design also helps satisfy the compact power budgets of portable or benchtop instruments.
Önerilen
Embedded Serial Peripheral Interfaces
Embedded systems can use the MAX3384ECWN+ to bridge a low-voltage microcontroller to a legacy RS-232 peripheral. Two transmitters support separate outbound paths, while two receivers can monitor responses or status lines from another device. The single 3.0V-to-5.5V supply range simplifies interfacing with embedded processors and programmable logic. Its 15kV ESD protection is beneficial when the transceiver sits near an external connector, but designers should still evaluate whether additional surge, isolation, or galvanic-separation components are required for their installation environment.
Önerilen
RS-232 Port Expansion
A controller with limited serial resources can expand its interface capability by adding the two transmitters and two receivers in the MAX3384ECWN+. One circuit can implement a bidirectional data path plus auxiliary status or handshake lines, subject to the device's operating constraints. Integration reduces the number of external ICs and the associated board area compared with separate transmitter and receiver packages. For designs requiring more than two channels per direction, multiple MAX3384E devices can be considered after checking address, grounding, and connector-routing requirements.
Önerilen
Instrumentation and Data Acquisition
The MAX3384ECWN+ is appropriate for instrumentation modules that communicate measurement or configuration data over RS-232. Its dual transmitters and dual receivers support data exchange and control-signal monitoring, while operation up to 250kbps is sufficient for numerous sensors, programmable dividers, and legacy data-acquisition equipment. Because unbalanced RS-232 links can be affected by ground-potential differences and cable noise, installation practice matters. Confirm signal levels, line termination, and grounding against the manufacturer's interface guidance before deploying the device in a new system.
Önerilen
Mühendislik referans verileri: MAX3384ECWN+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX3384ECAP | MAX3384EEAP |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | SSOP-20 | SSOP-20 - same package | SSOP-20 - same package |
| Technology | RS-232 | RS-232 | RS-232 |
| Device Type | Transceiver | Transceiver | Transceiver |
| Channel Configuration | 2/2 | 2/2 | 2/2 |
| Maximum Data Rate | 250kbps | 250kbps | 250kbps |
Ana Farklılayıcılar
- Four integrated RS-232 channels in one interface IC (karşılaştırma:MAX3384ECAP)
- High data-rate capability for legacy serial links (karşılaştırma:MAX3384EEAP)
- Enhanced ESD protection on interface connections (karşılaştırma:MAX3384ECAP)
Tasarım Notları
Do not connect the MAX3384ECWN+ directly to a TTL or CMOS UART signal and expect RS-232 voltage levels. The transmitter inputs and receiver outputs belong on the logic side of the interface, while the protected transmitter outputs and receiver inputs connect to the RS-232 lines. Confirm pin directions using the manufacturer pin-description table before laying out the PCB.
Keep the RS-232-side traces short, route them away from clocks, switching nodes, and high-slew-current signals, and provide a direct ground return alongside the cable path where practical. Unused receiver inputs should be handled according to the manufacturer truth table and input-bias guidance rather than left floating. Connector protection should supplement, not replace, the device's integrated 15kV ESD protection.
Place local supply-decoupling capacitance close to the device's supply and ground pins, and route high-current return paths without sharing narrow sections with sensitive interface signals. Check the supply voltage during startup and ensure it remains between 3.0V and 5.5V. The low-power operating requirement does not eliminate the need for a stable supply rail when multiple external RS-232 ports share a system.
RS-232 is an unbalanced interface, so cable routing, grounding, and connector quality can affect signal integrity even when the data rate is well below 250kbps. Reduce data rate if the cable is long or heavily loaded, maintain a consistent ground reference between connected equipment, and use shielded cable when it crosses noisy industrial environments. Treat 250kbps as a device capability rather than a guaranteed rate for every cable installation.
Uyumluluk Bilgisi
Compliance declarations were not established for this exact ordering suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Analog Devices before environmental qualification.