MAX3384ECWN+ - 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3384ECWN+ ✓ Hoạt độngMAX3384ECWN+ Tóm tắt
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 levels back into digital logic. It belongs to the transceiver hierarchy within interface ICs, providing the physical signaling layer between data-processing equipment and a cable-connected peripheral or system. The MAX3384ECWN+ implements the EIA/TIA-232 and V.28/V.24 signaling requirements described for this device family.
The principal features include operation from a 3.0V to 5.5V supply, operation up to 250kbps, two transmit outputs, two receive inputs, and enhanced ESD protection. Low-power requirements make the device suitable for systems in which interface circuitry must coexist with low-voltage digital logic. The manufacturer describes protection on both transmitter outputs and receiver inputs, which is important when cables may be connected, disconnected, or exposed to electrostatic discharge.
The MAX3384ECWN+ combines true RS-232 line-driver and receiver functions in one integrated circuit. Its powered-down behavior reduces power consumption when the associated subsystem is inactive. Because the interface operates from a single low-voltage supply while generating compliant RS-232 levels, it can simplify designs that would otherwise require separate external line drivers, receivers, and protection networks.
Typical uses include industrial control consoles, point-of-sale terminals, test equipment, instrumentation, and embedded systems that communicate with RS-232 peripherals through cables. The 250kbps capability is useful for moderate-speed serial links, while the integrated two-channel transmitter and receiver arrangement reduces the number of components required for bidirectional or multiport serial interfaces.
The principal design consideration is the difference between RS-232 and TTL-level signaling. The MAX3384ECWN+ is intended for the RS-232 side of the connection; it does not directly accept or produce standard TTL or CMOS logic levels. Layout should preserve short return paths and appropriate grounding, while external protection and cable-length considerations should follow the manufacturer's interface guidance.
This product page combines the device's core electrical characteristics, verified package information, practical application guidance, and documented same-family replacement options. It also distinguishes true pin-compatible alternatives from broader RS-232 interface products that may use a different package, voltage rating, feature set, or channel arrangement.
Bộ thay thế dễ dàng lắp đặt cho MAX3384ECWN+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3384ECWN+ (cùng hình factor và footprint) — khác nhau ở Maximum Data Rate, Supply Voltage Range, Device Type, Interface Standard, Number of Pins.
MAX3384ECAP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3384EEAP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3384ECWN+ Thông số kỹ thuật
| Technology | RS-232 |
| Device Type | Transceiver |
| Channel Configuration | 2/2 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| Transmitter Channels | 2 |
| Receiver Channels | 2 |
| Logic Standard | EIA/TIA-232 and V.28/V.24 |
| ESD Protection | 15kV |
| Nhiệt độ hoạt động | 0C to 70C |
| Package Type | SSOP-20 |
| Package Dimensions | 5.30mm long with 0.65mm pitch |
| Số chân | 20 pins |
| Kiểu lắp đặt | Surface Mount |
| Power Requirements | Low power |
Hướng dẫn cấu hình chân MAX3384ECWN+ 5.30mm long with 0.65mm pitch
Cấu hình chân cho MAX3384ECWN+ (5.30mm long with 0.65mm pitch gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3384ECWN+.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3384ECWN+ phù hợp cho 6 Áp dụngs: Industrial Control Consoles, Point-of-Sale Terminals, Test and Measurement Equipment, Embedded Serial Peripheral Interfaces, RS-232 Port Expansion, Instrumentation and Data Acquisition.
Industrial Control Consoles
The MAX3384ECWN+ fits industrial consoles and controller boards that communicate with older RS-232 instruments through cables. Its two transmit channels and two receive channels support bidirectional or multiport serial arrangements without requiring separate line-driver and receiver ICs. Operation from 3.0V to 5.5V supports both 3.3V and 5V control-logic rails, while the 250kbps data rate covers many configuration and status protocols. The 15kV ESD protection improves resilience at connector-facing outputs and inputs, although board-level grounding and cable selection remain important in electrically noisy equipment.
Được đề xuất
Point-of-Sale Terminals
Point-of-sale terminals often connect receipt printers, scales, scanners, and customer displays through legacy RS-232 ports. The MAX3384ECWN+ combines two drivers and two receivers in one 20-pin SSOP, reducing board area in compact peripheral interfaces. Its low-voltage supply operation allows direct connection to a 3.3V or 5V embedded controller, while the maximum 250kbps rate supports typical transactional serial traffic. The enhanced ESD protection is valuable at user-accessible connectors, but a reliable ground reference and appropriately shielded cable are still necessary for reliable operation.
Được đề xuất
Test and Measurement Equipment
Laboratory instruments, programmable power supplies, and automated test platforms often retain RS-232 interfaces for legacy computer connections or equipment-to-equipment control. The MAX3384ECWN+ provides a compact two-channel interface for routing command and response signals. Its 250kbps limit is appropriate for many legacy instrumentation protocols, although modern long cables may operate more reliably at lower rates because capacitance and loading increase with frequency. The integrated low-power design also helps satisfy the compact power budgets of portable or benchtop instruments.
Được đề xuất
Embedded Serial Peripheral Interfaces
Embedded systems can use the MAX3384ECWN+ to bridge a low-voltage microcontroller to a legacy RS-232 peripheral. Two transmitters support separate outbound paths, while two receivers can monitor responses or status lines from another device. The single 3.0V-to-5.5V supply range simplifies interfacing with embedded processors and programmable logic. Its 15kV ESD protection is beneficial when the transceiver sits near an external connector, but designers should still evaluate whether additional surge, isolation, or galvanic-separation components are required for their installation environment.
Được đề xuất
RS-232 Port Expansion
A controller with limited serial resources can expand its interface capability by adding the two transmitters and two receivers in the MAX3384ECWN+. One circuit can implement a bidirectional data path plus auxiliary status or handshake lines, subject to the device's operating constraints. Integration reduces the number of external ICs and the associated board area compared with separate transmitter and receiver packages. For designs requiring more than two channels per direction, multiple MAX3384E devices can be considered after checking address, grounding, and connector-routing requirements.
Được đề xuất
Instrumentation and Data Acquisition
The MAX3384ECWN+ is appropriate for instrumentation modules that communicate measurement or configuration data over RS-232. Its dual transmitters and dual receivers support data exchange and control-signal monitoring, while operation up to 250kbps is sufficient for numerous sensors, programmable dividers, and legacy data-acquisition equipment. Because unbalanced RS-232 links can be affected by ground-potential differences and cable noise, installation practice matters. Confirm signal levels, line termination, and grounding against the manufacturer's interface guidance before deploying the device in a new system.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3384ECWN+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3384ECAP | MAX3384EEAP |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | SSOP-20 | SSOP-20 - same package | SSOP-20 - same package |
| Technology | RS-232 | RS-232 | RS-232 |
| Device Type | Transceiver | Transceiver | Transceiver |
| Channel Configuration | 2/2 | 2/2 | 2/2 |
| Maximum Data Rate | 250kbps | 250kbps | 250kbps |
Bảo phân biệt quan trọng
- Four integrated RS-232 channels in one interface IC (vsMAX3384ECAP)
- High data-rate capability for legacy serial links (vsMAX3384EEAP)
- Enhanced ESD protection on interface connections (vsMAX3384ECAP)
Ghi chú thiết kế
Do not connect the MAX3384ECWN+ directly to a TTL or CMOS UART signal and expect RS-232 voltage levels. The transmitter inputs and receiver outputs belong on the logic side of the interface, while the protected transmitter outputs and receiver inputs connect to the RS-232 lines. Confirm pin directions using the manufacturer pin-description table before laying out the PCB.
Keep the RS-232-side traces short, route them away from clocks, switching nodes, and high-slew-current signals, and provide a direct ground return alongside the cable path where practical. Unused receiver inputs should be handled according to the manufacturer truth table and input-bias guidance rather than left floating. Connector protection should supplement, not replace, the device's integrated 15kV ESD protection.
Place local supply-decoupling capacitance close to the device's supply and ground pins, and route high-current return paths without sharing narrow sections with sensitive interface signals. Check the supply voltage during startup and ensure it remains between 3.0V and 5.5V. The low-power operating requirement does not eliminate the need for a stable supply rail when multiple external RS-232 ports share a system.
RS-232 is an unbalanced interface, so cable routing, grounding, and connector quality can affect signal integrity even when the data rate is well below 250kbps. Reduce data rate if the cable is long or heavily loaded, maintain a consistent ground reference between connected equipment, and use shielded cable when it crosses noisy industrial environments. Treat 250kbps as a device capability rather than a guaranteed rate for every cable installation.
Thông tin tuân thủ
Compliance declarations were not established for this exact ordering suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Analog Devices before environmental qualification.