NXP Semiconductors

MC9S08PL32CQH - 20MHz 8-Bit S08 MCU | NXP

MPN: MC9S08PL32CQH ✓ Aktif
3.3 V to 5 V Vdss 64-QFP (1 package, 14 x 14 mm) Package 20 MHz Speed 32 KB (32K x 8 bits) Memory
MOQ: 1 |

MC9S08PL32CQH Genel Bakış

The NXP Semiconductors MC9S08PL32CQH is an 8-bit S08 microcontroller with a 20 MHz operating frequency, 32 KB of flash memory, and a 64-QFP 14 x 14 mm package. It also provides EEPROM, a 10-bit ADC, an analog comparator, flexible timers, UART/SCI communication, and an integrated LCD driver for compact display-oriented control systems.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one device. The S08 core uses a CISC architecture and is positioned as a cost-effective 8-bit embedded controller. Within the product hierarchy, MC9S08PL32CQH is an 8-bit microcontroller, part of the S08 family, and specifically an S08PL-series device intended for portable and cost-sensitive embedded applications.

The S08PL feature set supports local sensing, human-interface control, and serial communications without requiring several separate analog or interface ICs. Its 10-bit ADC supports battery or sensor monitoring, while the analog comparator supports threshold and simple waveform-detection functions. The integrated LCD driver reduces external display-interface hardware requirements, and UART/SCI allows connection to sensors, host controllers, or service equipment.

The 32 KB flash configuration provides 32K x 8 bits of program storage. Its 8-bit CISC processor runs at up to 20 MHz, balancing responsive control performance with straightforward firmware development for motor controls, appliance interfaces, metering equipment, portable instruments, and small industrial controllers. The operating voltage is identified as 3.3 V and 5 V compatible.

MC9S08PL32CQH is suitable for portable display applications, battery-powered instruments, keypad interfaces, simple data loggers, and low-cost embedded control modules. The LCD driver and serial interface make it especially useful when the board must present local information while communicating with another system. A designer should also confirm the complete peripheral mix, pin multiplexing, and clock requirements against the manufacturer datasheet before finalizing a new design.

Use the manufacturer pin-assignment table when routing the 64-QFP footprint, and keep analog, digital, and LCD-related connections consistent with the recommended decoupling and layout guidance. The package provides a relatively high pin count for an 8-bit controller, leaving dedicated interface and control resources, but it also demands careful fanout and inspection during PCB assembly.

This product page combines the manufacturer product information with practical guidance covering the 20 MHz S08 core, 32 KB flash configuration, ADC, comparator, timers, UART/SCI, LCD driver, package constraints, sourcing, and design considerations for engineers evaluating the MC9S08PL32CQH.

Drop-in alternatifler için MC9S08PL32CQH — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MC9S08PL32CQH (aynı form faktörü ve ayağa oturma) — farklı olan Mounting Type, Package, Timers.

NXP Semiconductors
Mounting Type: Surface Mount (QFP)
Package: 64-QFP (14x14 mm)
Timers: 16-bit modulo timer + RTC
İle Karşılaştır MC9S08PL32CQH →

MC9S08JM60CQH

✅ Yerleştirme
NXP Semiconductors
📦 64-QFP
HCS08 (8-bit) · 48 MHz · 24 MHz · 60 KB (60K x 8) · 4 KB · 2.7 V to 5.5 V · 64-QFP (14x14 mm) · 64

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MC9S08PL64CQH

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-QFP
Flash is 64 KB versus 32 KB, 32 KB or 100% higher; shared S08PL family and 64-QFP outline require final pin-level verification

📋 Katalogda Olmayan Referans Alternatifi

MC9S08PL32CQH Maksimum Değerlendirmeler & Elektriksel Özellikler

Architecture 8-bit CISC (1 architecture mode)
CPU Family NXP S08PL (1 series)
Azami Saat Hızı 20 MHz
Flash Memory 32 KB (32K x 8 bits)
EEPROM Integrated (1 feature)
ADC Resolution 10 bits
Analog Comparator Integrated (1 comparator)
Timers Flexible timer resources (1 peripheral group)
Serial Interface UART/SCI (1 interface class)
LCD Driver Integrated (1 display controller)
Operating Voltage 3.3 V to 5 V
Paket 64-QFP (1 package, 14 x 14 mm)
Montaj Türü Surface mount (1 mounting method)
Yaşam Döngüsü Durumu Active (1 manufacturer status)
Moisture Sensitivity Level 3 (MSL level)
Peak Reflow Temperature 260 C
Maximum Peak Reflow Time 40 s
Terminal Finish Tin (1 finish designation)
JESD Classification e3 (1 assembly classification)

MC9S08PL32CQH 64-qfp (1 package, 14 x 14 mm) Pin Yapısı Kılavuzu

MC9S08PL32CQH (64-qfp (1 package, 14 x 14 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-qfp (1 package, 14 x 14 mm) paket pin çizelgesi için MC9S08PL32CQH

Ayrıntılı pin çıkış verisi mevcut değil: MC9S08PL32CQH.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MC9S08PL32CQH için uygundur 6 uygulamas: Portable Display Controller, Battery-Powered Sensor Instrument, Appliance Control Panel, Simple Data Logger, LED and Lighting Controller, Portable Medical or Diagnostic Interface.

📱

Portable Display Controller

The MC9S08PL32CQH fits portable display products because it combines an 8-bit S08 core, 32 KB of flash, an integrated LCD driver, and UART/SCI in one 64-QFP device. The MCU can maintain a local user interface, read control inputs, and update display information without requiring a separate display-controller IC. Its 20 MHz operating frequency provides ample control bandwidth for menu navigation and status presentation. Before final assignment, verify the supported LCD configuration, segment count, multiplexing requirements, and associated pins in the manufacturer datasheet.

🧩

Battery-Powered Sensor Instrument

The MC9S08PL32CQH is suitable for compact battery-powered instruments because it combines a 10-bit ADC, analog comparator, EEPROM, timers, and 32 KB of flash on a single device. The ADC can digitize sensor signals, while the comparator can support independent threshold detection; firmware can then present measurements through the LCD driver or serial interface. The 3.3 V and 5 V operating compatibility supports mixed-voltage product architectures. Power consumption, ADC accuracy, and low-power operating modes should be evaluated against the intended battery budget.

🏭

Appliance Control Panel

MC9S08PL32CQH can serve as the central controller in an appliance or compact equipment panel where a display, keypad, timers, and serial communication must coexist. Its integrated LCD driver reduces the component count associated with local human-interface designs, while flexible timers support repetitive switching, delay, and sequencing functions. UART/SCI provides a path to a main board, service connector, or external sensor. Use the manufacturer pin-description table to confirm whether the chosen panel layout requires alternate LCD or timer multiplexing.

📟

Simple Data Logger

The MC9S08PL32CQH can organize a compact data logger that periodically samples an analog input, records operational information, and reports through a serial link. Its 10-bit ADC is suitable for many slow-changing sensor signals, and the 20 MHz S08 core provides ample processing capacity for timestamps, filtering, status flags, and local display updates. EEPROM may support retained configuration or calibration parameters. Designers should size the firmware budget within 32 KB and verify whether the intended retention and update-cycle requirements suit the integrated EEPROM.

💡

LED and Lighting Controller

The MC9S08PL32CQH is applicable to small LED lighting controllers because flexible timers can generate repeatable switching sequences, while the ADC can monitor a divider-derived supply or current-sense signal. The controller can add operating schedules, status indication, and remote updates through UART/SCI without occupying most peripheral resources. Keep LED drive transistors or constant-current drivers outside the MCU and design the PCB so switching current and analog sensing paths remain separated. Verify timer resolution and selected pin functions in the NXP manufacturer datasheet.

💊

Portable Medical or Diagnostic Interface

The MC9S08PL32CQH can support compact diagnostic accessories that combine a small display, a low-speed sensor interface, and local status reporting. The 10-bit ADC supports basic analog measurement, the analog comparator supports threshold events, and UART/SCI allows connection to a higher-level controller or service interface. Its 32 KB flash and integrated LCD driver can simplify a focused portable design. Medical use requires separate evaluation of accuracy, safety, regulatory scope, and validation; this component alone does not establish medical certification.

What is the MC9S08PL32CQH?
The MC9S08PL32CQH is an active NXP 8-bit S08PL microcontroller with a 20 MHz clock, 32 KB of flash memory, and a 64-QFP package. According to the NXP manufacturer datasheet and product information, it integrates EEPROM, a 10-bit ADC, an analog comparator, flexible timers, UART/SCI, and an LCD driver. It is intended for cost-sensitive embedded systems that need local display control, serial communications, and analog measurement functions.
What are the key specifications of MC9S08PL32CQH that engineers should know?
The MC9S08PL32CQH combines an 8-bit CISC core, 20 MHz maximum clock, and 32 KB of flash in a 64-QFP 14 x 14 mm package. Its integrated peripherals include a 10-bit ADC, analog comparator, EEPROM, flexible timers, UART/SCI, and LCD driver, with operation identified as 3.3 V and 5 V compatible. The NXP manufacturer datasheet is the controlling reference for detailed register, pin-multiplexing, and electrical characteristics.
How much flash memory does the MC9S08PL32CQH have?
The MC9S08PL32CQH contains 32 KB of flash memory organized as 32K x 8 bits. According to the NXP product information, this program storage is suitable for embedded control firmware requiring substantially more code space than a basic small-format 8-bit MCU. Application firmware, boot logic, calibration constants, and display routines should be included in the memory-budget review when planning code allocation.
Where can I download the MC9S08PL32CQH datasheet PDF?
The official MC9S08PL32CQH documentation is available through the NXP product page at https://www.nxp.com/part/MC9S08PL32CQH, where the manufacturer provides the data sheet and product documentation. Use the NXP manufacturer datasheet for final pin assignments, memory maps, electrical limits, timing, and peripheral behavior. The active manufacturer part page is the preferred starting point because it maintains the current revision and product notices.
Where can I find the MC9S08PL32CQH pinout?
The MC9S08PL32CQH pinout is defined in the pin-description and package drawings within the NXP manufacturer datasheet. The device uses a 64-QFP 14 x 14 mm package, so the schematic symbol and PCB footprint must include all 64 terminals and preserve the manufacturer-defined numbering. Use the pin-description table to verify LCD, ADC, timer, UART/SCI, clock, reset, and power assignments before routing.
Can MC9S08PL32CQH control an LCD directly?
Yes, the MC9S08PL32CQH includes an integrated LCD driver for portable display applications. According to the NXP product information, this capability can reduce the external circuitry and MCU count needed for segmented or matrix display designs. Actual segment count, bias configuration, and multiplexing capability should be confirmed in the manufacturer datasheet for the exact package and operating configuration before assigning display electrodes.
What peripherals are integrated into the MC9S08PL32CQH?
The MC9S08PL32CQH integrates EEPROM, a 10-bit ADC, an analog comparator, flexible timers, UART/SCI, and an LCD driver around an 8-bit S08 core. According to the NXP manufacturer datasheet, these resources support local sensing, threshold detection, timing control, serial communication, and display output. Their availability and pin multiplexing must still be checked for the selected operating mode and board configuration.
Where can I buy MC9S08PL32CQH online?
The MC9S08PL32CQH can be requested through the Request a Quote form on this XAIPART product page. The manufacturer lists the exact part as active, and the part is also indexed under NXP Semiconductors as an S08PL 8-bit microcontroller in a 64-QFP package. Submit the required quantity, target price, delivery location, and date requirements so the current commercial position can be reviewed.
What is the price of MC9S08PL32CQH?
Current commercial pricing for the MC9S08PL32CQH should be obtained through the Request a Quote form on this page. The structured price area reflects the latest qualifying quotation data, while the Request a Quote workflow is the recommended channel for an exact price, stock confirmation, and order commitment. Quote requests should specify quantity, date code requirements, target location, and whether multiple sourcing quantities are needed.
What is the lead time for MC9S08PL32CQH?
Use the Request a Quote form on this page to request the current lead time and stock allocation for MC9S08PL32CQH. The NXP product page identifies the exact device as active, which supports lifecycle planning, but production timing and available quantity can vary with order configuration and date code. Include your required delivery date and annual usage so the sourcing response reflects the actual schedule.
Is MC9S08PL32CQH in stock?
The MC9S08PL32CQH is an active NXP device, and current stock should be confirmed through the Request a Quote form on this page. Stock status can change with factory inventory, allocation, and order quantity, so a lifecycle label should not be interpreted as an immediate shipment guarantee. Provide the required quantity and target date when requesting a quotation and availability confirmation.
MC9S08PL32CQH vs MC9S08JM60CQH: which is better for a 32 KB design?
The MC9S08PL32CQH is the closer match when the existing design specifically targets 32 KB of flash and the S08PL peripheral set. The MC9S08JM60CQH is a different NXP S08 family member with approximately 60 KB of flash, so it may require firmware, pin-function, and peripheral-resource review rather than being treated as an automatic substitution. The NXP manufacturer datasheets should be compared before any board change.
When should I choose MC9S08PL32CQH over another 8-bit MCU?
Choose MC9S08PL32CQH when the design benefits from an 8-bit S08PL core, 20 MHz operation, 32 KB of flash, integrated EEPROM, a 10-bit ADC, UART/SCI, and an LCD driver in a 64-QFP package. It is especially practical for portable display devices and compact embedded instruments. Choose another MCU when its core architecture, memory size, pinout, peripheral mix, or available ecosystem better matches the product.
What is the best drop-in replacement for MC9S08PL32CQH?
No cross-manufacturer drop-in replacement has been confirmed for the MC9S08PL32CQH, so the safest replacement path is an engineering review of the NXP S08 family and the manufacturer datasheets. A candidate must match the 64-QFP footprint, pin functions, 20 MHz operating class, 32 KB memory requirement, ADC, UART/SCI, LCD driver, voltage range, and peripheral multiplexing. Do not approve a substitute from package similarity alone.
What can replace MC9S08PL32CQH?
The MC9S08JM60CQH is a documented same-manufacturer comparison candidate, but its approximately 60 KB flash configuration differs from the 32 KB in the MC9S08PL32CQH and it may not preserve every pin function. Therefore, it is not established as a true drop-in replacement. Review the NXP manufacturer datasheets and use the Request a Quote form when seeking an exact-footprint sourcing recommendation.
Is MC9S08PL32CQH the same as MC9S08PL64CQH?
No, the MC9S08PL32CQH and MC9S08PL64CQH differ principally in flash capacity: 32 KB versus 64 KB, a difference of 32 KB or 100%. They belong to the same NXP S08PL family and may share a 64-QFP outline, but shared package dimensions alone do not prove pin-to-pin functional compatibility. Confirm electrical ratings, peripheral multiplexing, and pin assignments in the manufacturer datasheets before substitution.

Mühendislik referans verileri: MC9S08PL32CQH — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MC9S08PL32CQH for compact embedded products that need an 8-bit S08PL controller, 20 MHz operation, 32 KB of flash, UART/SCI, an integrated LCD driver, a 10-bit ADC, and a 64-QFP footprint. It is a strong fit for portable displays, metering equipment, appliance panels, and compact sensor interfaces. Consider MC9S08PL64CQH when the same-family approach offers sufficient pin compatibility but additional code storage is valuable; its 64 KB flash is 32 KB higher. Treat MC9S08JM60CQH as a review candidate rather than an automatic substitution because its approximately 60 KB memory configuration belongs to a different S08 family branch. No cross-manufacturer drop-in replacement is established, so a redesign or footprint change should be treated as a new engineering qualification rather than a drop-in exchange.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MC9S08JM60CQH MC9S08PL64CQH
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-QFP, 14 x 14 mm 64-QFP 64-QFP
CPU Architecture 8-bit CISC 8-bit CISC 8-bit CISC
Flash Memory 32 KB Approximately 60 KB 64 KB
Serial Interface UART/SCI UART/SCI UART/SCI
Integrated LCD Driver Yes Yes Yes

Ana Farklılayıcılar

  • Integrated display and analog control in one MCU (karşılaştırma:MC9S08JM60CQH)
  • Right-sized flash for cost-sensitive firmware (karşılaştırma:MC9S08PL64CQH)
  • Dedicated S08PL feature set (karşılaştırma:MC9S08JM60CQH)

Tasarım Notları

Use the manufacturer package drawing and pin-description table to create the 64-QFP footprint, including the correct pad lengths, courtyard, solder-mask clearance, and pin-1 orientation. Route the LCD outputs, ADC inputs, timer signals, and UART/SCI according to their assigned multiplexing. Because this 8-bit controller uses a relatively dense 64-terminal package, check every net against the symbol before fabrication to prevent silent pin shifts.

Keep analog inputs and comparator connections away from switching nodes, LCD drive traces, and digital return-current paths. Route the ADC source directly to its assigned pin and place any required input filtering close to the device. A solid ground plane helps establish predictable analog and digital return behavior, while keeping the LCD and high-current external drive circuitry physically separated reduces coupling into sensitive measurements.

Decouple each required supply pin with the capacitance and placement specified by the NXP manufacturer datasheet. Place bulk and local bypass capacitors close to their associated pins, with the shortest practical ground-return path. Verify startup behavior for the LCD, ADC, timer, and serial resources so enabling a peripheral does not cause an unacceptable supply disturbance in a battery-powered or display-heavy product.

Do not treat the 64-QFP outline as proof that another S08 device is automatically interchangeable. MC9S08JM60CQH has a different flash size, and MC9S08PL64CQH has 64 KB rather than 32 KB. Before substituting either candidate, verify pin multiplexing, ADC resources, timer assignments, LCD connections, reset behavior, clock requirements, and operating limits in the manufacturer datasheets. Firmware may also require memory and peripheral changes.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The component is a general-purpose 8-bit microcontroller rather than an AEC-Q100-qualified automotive device. Terminal finish is identified as tin with JESD classification e3, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MC9S08PL32CQH datasheet MC9S08PL32CQH pinout MC9S08PL32CQH datasheet pdf MC9S08PL32CQH equivalent MC9S08PL32CQH replacement MC9S08PL32CQH price MC9S08PL32CQH stock NXP MC9S08PL32CQH MC9S08PL32CQH vs MC9S08JM60CQH MC9S08PL32CQH footprint MC9S08PL32CQH 64 QFP MC9S08PL32CQH application circuit

İlgili Bileşenler ve Terimler

NXP Semiconductors MC9S08PL32CQH MC9S08JM60CQH MC9S08PL64CQH MC9S08AW32CFUE S08PL 8-bit microcontroller CISC architecture embedded controller semiconductor 20 MHz clock 32 KB flash EEPROM 10-bit ADC analog comparator flexible timers UART/SCI integrated LCD driver 64-QFP QFP package family surface mount SMD portable display applications sensor measurement 3.3 V and 5 V operation
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle