MC9S08PL32CQH - 20MHz 8-Bit S08 MCU | NXP
MPN: MC9S08PL32CQH ✓ 啟用中MC9S08PL32CQH 概覽
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one device. The S08 core uses a CISC architecture and is positioned as a cost-effective 8-bit embedded controller. Within the product hierarchy, MC9S08PL32CQH is an 8-bit microcontroller, part of the S08 family, and specifically an S08PL-series device intended for portable and cost-sensitive embedded applications.
The S08PL feature set supports local sensing, human-interface control, and serial communications without requiring several separate analog or interface ICs. Its 10-bit ADC supports battery or sensor monitoring, while the analog comparator supports threshold and simple waveform-detection functions. The integrated LCD driver reduces external display-interface hardware requirements, and UART/SCI allows connection to sensors, host controllers, or service equipment.
The 32 KB flash configuration provides 32K x 8 bits of program storage. Its 8-bit CISC processor runs at up to 20 MHz, balancing responsive control performance with straightforward firmware development for motor controls, appliance interfaces, metering equipment, portable instruments, and small industrial controllers. The operating voltage is identified as 3.3 V and 5 V compatible.
MC9S08PL32CQH is suitable for portable display applications, battery-powered instruments, keypad interfaces, simple data loggers, and low-cost embedded control modules. The LCD driver and serial interface make it especially useful when the board must present local information while communicating with another system. A designer should also confirm the complete peripheral mix, pin multiplexing, and clock requirements against the manufacturer datasheet before finalizing a new design.
Use the manufacturer pin-assignment table when routing the 64-QFP footprint, and keep analog, digital, and LCD-related connections consistent with the recommended decoupling and layout guidance. The package provides a relatively high pin count for an 8-bit controller, leaving dedicated interface and control resources, but it also demands careful fanout and inspection during PCB assembly.
This product page combines the manufacturer product information with practical guidance covering the 20 MHz S08 core, 32 KB flash configuration, ADC, comparator, timers, UART/SCI, LCD driver, package constraints, sourcing, and design considerations for engineers evaluating the MC9S08PL32CQH.
直接替換替代品,適用於 MC9S08PL32CQH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC9S08PL32CQH (相同外形與佔位) — 差異在於 Mounting Type, Package, Timers.
MC9S08JM60CQH
✅ 直接替換聯絡詢價
查看資料表 →MC9S08PL64CQH
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MC9S08PL32CQH 最大額定值與電氣特性
| Architecture | 8-bit CISC (1 architecture mode) |
| CPU Family | NXP S08PL (1 series) |
| 最大時脈頻率 | 20 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| EEPROM | Integrated (1 feature) |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated (1 comparator) |
| Timers | Flexible timer resources (1 peripheral group) |
| Serial Interface | UART/SCI (1 interface class) |
| LCD Driver | Integrated (1 display controller) |
| Operating Voltage | 3.3 V to 5 V |
| 封裝 | 64-QFP (1 package, 14 x 14 mm) |
| 安裝類型 | Surface mount (1 mounting method) |
| 生命週期狀態 | Active (1 manufacturer status) |
| Moisture Sensitivity Level | 3 (MSL level) |
| Peak Reflow Temperature | 260 C |
| Maximum Peak Reflow Time | 40 s |
| Terminal Finish | Tin (1 finish designation) |
| JESD Classification | e3 (1 assembly classification) |
MC9S08PL32CQH 64-qfp (1 package, 14 x 14 mm) 腳位配置指南
MC9S08PL32CQH(64-qfp (1 package, 14 x 14 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MC9S08PL32CQH.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S08PL32CQH 適用於 6 應用s: Portable Display Controller, Battery-Powered Sensor Instrument, Appliance Control Panel, Simple Data Logger, LED and Lighting Controller, Portable Medical or Diagnostic Interface.
Portable Display Controller
The MC9S08PL32CQH fits portable display products because it combines an 8-bit S08 core, 32 KB of flash, an integrated LCD driver, and UART/SCI in one 64-QFP device. The MCU can maintain a local user interface, read control inputs, and update display information without requiring a separate display-controller IC. Its 20 MHz operating frequency provides ample control bandwidth for menu navigation and status presentation. Before final assignment, verify the supported LCD configuration, segment count, multiplexing requirements, and associated pins in the manufacturer datasheet.
推薦
Battery-Powered Sensor Instrument
The MC9S08PL32CQH is suitable for compact battery-powered instruments because it combines a 10-bit ADC, analog comparator, EEPROM, timers, and 32 KB of flash on a single device. The ADC can digitize sensor signals, while the comparator can support independent threshold detection; firmware can then present measurements through the LCD driver or serial interface. The 3.3 V and 5 V operating compatibility supports mixed-voltage product architectures. Power consumption, ADC accuracy, and low-power operating modes should be evaluated against the intended battery budget.
推薦
Appliance Control Panel
MC9S08PL32CQH can serve as the central controller in an appliance or compact equipment panel where a display, keypad, timers, and serial communication must coexist. Its integrated LCD driver reduces the component count associated with local human-interface designs, while flexible timers support repetitive switching, delay, and sequencing functions. UART/SCI provides a path to a main board, service connector, or external sensor. Use the manufacturer pin-description table to confirm whether the chosen panel layout requires alternate LCD or timer multiplexing.
推薦
Simple Data Logger
The MC9S08PL32CQH can organize a compact data logger that periodically samples an analog input, records operational information, and reports through a serial link. Its 10-bit ADC is suitable for many slow-changing sensor signals, and the 20 MHz S08 core provides ample processing capacity for timestamps, filtering, status flags, and local display updates. EEPROM may support retained configuration or calibration parameters. Designers should size the firmware budget within 32 KB and verify whether the intended retention and update-cycle requirements suit the integrated EEPROM.
推薦
LED and Lighting Controller
The MC9S08PL32CQH is applicable to small LED lighting controllers because flexible timers can generate repeatable switching sequences, while the ADC can monitor a divider-derived supply or current-sense signal. The controller can add operating schedules, status indication, and remote updates through UART/SCI without occupying most peripheral resources. Keep LED drive transistors or constant-current drivers outside the MCU and design the PCB so switching current and analog sensing paths remain separated. Verify timer resolution and selected pin functions in the NXP manufacturer datasheet.
推薦
Portable Medical or Diagnostic Interface
The MC9S08PL32CQH can support compact diagnostic accessories that combine a small display, a low-speed sensor interface, and local status reporting. The 10-bit ADC supports basic analog measurement, the analog comparator supports threshold events, and UART/SCI allows connection to a higher-level controller or service interface. Its 32 KB flash and integrated LCD driver can simplify a focused portable design. Medical use requires separate evaluation of accuracy, safety, regulatory scope, and validation; this component alone does not establish medical certification.
推薦
推薦產品摘要
工程參考資料,適用於 MC9S08PL32CQH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC9S08JM60CQH | MC9S08PL64CQH |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-QFP, 14 x 14 mm | 64-QFP | 64-QFP |
| CPU Architecture | 8-bit CISC | 8-bit CISC | 8-bit CISC |
| Flash Memory | 32 KB | Approximately 60 KB | 64 KB |
| Serial Interface | UART/SCI | UART/SCI | UART/SCI |
| Integrated LCD Driver | Yes | Yes | Yes |
主要差異化特點
- Integrated display and analog control in one MCU (對比MC9S08JM60CQH)
- Right-sized flash for cost-sensitive firmware (對比MC9S08PL64CQH)
- Dedicated S08PL feature set (對比MC9S08JM60CQH)
設計說明
Use the manufacturer package drawing and pin-description table to create the 64-QFP footprint, including the correct pad lengths, courtyard, solder-mask clearance, and pin-1 orientation. Route the LCD outputs, ADC inputs, timer signals, and UART/SCI according to their assigned multiplexing. Because this 8-bit controller uses a relatively dense 64-terminal package, check every net against the symbol before fabrication to prevent silent pin shifts.
Keep analog inputs and comparator connections away from switching nodes, LCD drive traces, and digital return-current paths. Route the ADC source directly to its assigned pin and place any required input filtering close to the device. A solid ground plane helps establish predictable analog and digital return behavior, while keeping the LCD and high-current external drive circuitry physically separated reduces coupling into sensitive measurements.
Decouple each required supply pin with the capacitance and placement specified by the NXP manufacturer datasheet. Place bulk and local bypass capacitors close to their associated pins, with the shortest practical ground-return path. Verify startup behavior for the LCD, ADC, timer, and serial resources so enabling a peripheral does not cause an unacceptable supply disturbance in a battery-powered or display-heavy product.
Do not treat the 64-QFP outline as proof that another S08 device is automatically interchangeable. MC9S08JM60CQH has a different flash size, and MC9S08PL64CQH has 64 KB rather than 32 KB. Before substituting either candidate, verify pin multiplexing, ADC resources, timer assignments, LCD connections, reset behavior, clock requirements, and operating limits in the manufacturer datasheets. Firmware may also require memory and peripheral changes.
合規資訊
The component is a general-purpose 8-bit microcontroller rather than an AEC-Q100-qualified automotive device. Terminal finish is identified as tin with JESD classification e3, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.