MC9S08PL32CQH - 20MHz 8-Bit S08 MCU | NXP
Référence : MC9S08PL32CQH ✓ ActifMC9S08PL32CQH Présentation
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one device. The S08 core uses a CISC architecture and is positioned as a cost-effective 8-bit embedded controller. Within the product hierarchy, MC9S08PL32CQH is an 8-bit microcontroller, part of the S08 family, and specifically an S08PL-series device intended for portable and cost-sensitive embedded applications.
The S08PL feature set supports local sensing, human-interface control, and serial communications without requiring several separate analog or interface ICs. Its 10-bit ADC supports battery or sensor monitoring, while the analog comparator supports threshold and simple waveform-detection functions. The integrated LCD driver reduces external display-interface hardware requirements, and UART/SCI allows connection to sensors, host controllers, or service equipment.
The 32 KB flash configuration provides 32K x 8 bits of program storage. Its 8-bit CISC processor runs at up to 20 MHz, balancing responsive control performance with straightforward firmware development for motor controls, appliance interfaces, metering equipment, portable instruments, and small industrial controllers. The operating voltage is identified as 3.3 V and 5 V compatible.
MC9S08PL32CQH is suitable for portable display applications, battery-powered instruments, keypad interfaces, simple data loggers, and low-cost embedded control modules. The LCD driver and serial interface make it especially useful when the board must present local information while communicating with another system. A designer should also confirm the complete peripheral mix, pin multiplexing, and clock requirements against the manufacturer datasheet before finalizing a new design.
Use the manufacturer pin-assignment table when routing the 64-QFP footprint, and keep analog, digital, and LCD-related connections consistent with the recommended decoupling and layout guidance. The package provides a relatively high pin count for an 8-bit controller, leaving dedicated interface and control resources, but it also demands careful fanout and inspection during PCB assembly.
This product page combines the manufacturer product information with practical guidance covering the 20 MHz S08 core, 32 KB flash configuration, ADC, comparator, timers, UART/SCI, LCD driver, package constraints, sourcing, and design considerations for engineers evaluating the MC9S08PL32CQH.
Alternatives de remplacement direct pour MC9S08PL32CQH — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08PL32CQH (même facteur de forme et même empreinte) — différant par Mounting Type, Package, Timers.
MC9S08JM60CQH
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MC9S08PL64CQH
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MC9S08PL32CQH Valeurs maximales et caractéristiques électriques
| Architecture | 8-bit CISC (1 architecture mode) |
| CPU Family | NXP S08PL (1 series) |
| Fréquence d'horloge maximale | 20 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| EEPROM | Integrated (1 feature) |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated (1 comparator) |
| Timers | Flexible timer resources (1 peripheral group) |
| Serial Interface | UART/SCI (1 interface class) |
| LCD Driver | Integrated (1 display controller) |
| Operating Voltage | 3.3 V to 5 V |
| Boîtier | 64-QFP (1 package, 14 x 14 mm) |
| Type de montage | Surface mount (1 mounting method) |
| Statut du cycle de vie | Active (1 manufacturer status) |
| Moisture Sensitivity Level | 3 (MSL level) |
| Peak Reflow Temperature | 260 C |
| Maximum Peak Reflow Time | 40 s |
| Terminal Finish | Tin (1 finish designation) |
| JESD Classification | e3 (1 assembly classification) |
Guide de configuration des broches du MC9S08PL32CQH 64-qfp (1 package, 14 x 14 mm)
Configuration des broches du MC9S08PL32CQH (boîtier 64-qfp (1 package, 14 x 14 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08PL32CQH.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08PL32CQH convient pour 6 applications: Portable Display Controller, Battery-Powered Sensor Instrument, Appliance Control Panel, Simple Data Logger, LED and Lighting Controller, Portable Medical or Diagnostic Interface.
Portable Display Controller
The MC9S08PL32CQH fits portable display products because it combines an 8-bit S08 core, 32 KB of flash, an integrated LCD driver, and UART/SCI in one 64-QFP device. The MCU can maintain a local user interface, read control inputs, and update display information without requiring a separate display-controller IC. Its 20 MHz operating frequency provides ample control bandwidth for menu navigation and status presentation. Before final assignment, verify the supported LCD configuration, segment count, multiplexing requirements, and associated pins in the manufacturer datasheet.
Recommandé
Battery-Powered Sensor Instrument
The MC9S08PL32CQH is suitable for compact battery-powered instruments because it combines a 10-bit ADC, analog comparator, EEPROM, timers, and 32 KB of flash on a single device. The ADC can digitize sensor signals, while the comparator can support independent threshold detection; firmware can then present measurements through the LCD driver or serial interface. The 3.3 V and 5 V operating compatibility supports mixed-voltage product architectures. Power consumption, ADC accuracy, and low-power operating modes should be evaluated against the intended battery budget.
Recommandé
Appliance Control Panel
MC9S08PL32CQH can serve as the central controller in an appliance or compact equipment panel where a display, keypad, timers, and serial communication must coexist. Its integrated LCD driver reduces the component count associated with local human-interface designs, while flexible timers support repetitive switching, delay, and sequencing functions. UART/SCI provides a path to a main board, service connector, or external sensor. Use the manufacturer pin-description table to confirm whether the chosen panel layout requires alternate LCD or timer multiplexing.
Recommandé
Simple Data Logger
The MC9S08PL32CQH can organize a compact data logger that periodically samples an analog input, records operational information, and reports through a serial link. Its 10-bit ADC is suitable for many slow-changing sensor signals, and the 20 MHz S08 core provides ample processing capacity for timestamps, filtering, status flags, and local display updates. EEPROM may support retained configuration or calibration parameters. Designers should size the firmware budget within 32 KB and verify whether the intended retention and update-cycle requirements suit the integrated EEPROM.
Recommandé
LED and Lighting Controller
The MC9S08PL32CQH is applicable to small LED lighting controllers because flexible timers can generate repeatable switching sequences, while the ADC can monitor a divider-derived supply or current-sense signal. The controller can add operating schedules, status indication, and remote updates through UART/SCI without occupying most peripheral resources. Keep LED drive transistors or constant-current drivers outside the MCU and design the PCB so switching current and analog sensing paths remain separated. Verify timer resolution and selected pin functions in the NXP manufacturer datasheet.
Recommandé
Portable Medical or Diagnostic Interface
The MC9S08PL32CQH can support compact diagnostic accessories that combine a small display, a low-speed sensor interface, and local status reporting. The 10-bit ADC supports basic analog measurement, the analog comparator supports threshold events, and UART/SCI allows connection to a higher-level controller or service interface. Its 32 KB flash and integrated LCD driver can simplify a focused portable design. Medical use requires separate evaluation of accuracy, safety, regulatory scope, and validation; this component alone does not establish medical certification.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08PL32CQH — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08JM60CQH | MC9S08PL64CQH |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-QFP, 14 x 14 mm | 64-QFP | 64-QFP |
| CPU Architecture | 8-bit CISC | 8-bit CISC | 8-bit CISC |
| Flash Memory | 32 KB | Approximately 60 KB | 64 KB |
| Serial Interface | UART/SCI | UART/SCI | UART/SCI |
| Integrated LCD Driver | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated display and analog control in one MCU (vs MC9S08JM60CQH)
- Right-sized flash for cost-sensitive firmware (vs MC9S08PL64CQH)
- Dedicated S08PL feature set (vs MC9S08JM60CQH)
Notes de conception
Use the manufacturer package drawing and pin-description table to create the 64-QFP footprint, including the correct pad lengths, courtyard, solder-mask clearance, and pin-1 orientation. Route the LCD outputs, ADC inputs, timer signals, and UART/SCI according to their assigned multiplexing. Because this 8-bit controller uses a relatively dense 64-terminal package, check every net against the symbol before fabrication to prevent silent pin shifts.
Keep analog inputs and comparator connections away from switching nodes, LCD drive traces, and digital return-current paths. Route the ADC source directly to its assigned pin and place any required input filtering close to the device. A solid ground plane helps establish predictable analog and digital return behavior, while keeping the LCD and high-current external drive circuitry physically separated reduces coupling into sensitive measurements.
Decouple each required supply pin with the capacitance and placement specified by the NXP manufacturer datasheet. Place bulk and local bypass capacitors close to their associated pins, with the shortest practical ground-return path. Verify startup behavior for the LCD, ADC, timer, and serial resources so enabling a peripheral does not cause an unacceptable supply disturbance in a battery-powered or display-heavy product.
Do not treat the 64-QFP outline as proof that another S08 device is automatically interchangeable. MC9S08JM60CQH has a different flash size, and MC9S08PL64CQH has 64 KB rather than 32 KB. Before substituting either candidate, verify pin multiplexing, ADC resources, timer assignments, LCD connections, reset behavior, clock requirements, and operating limits in the manufacturer datasheets. Firmware may also require memory and peripheral changes.
Informations de conformité
The component is a general-purpose 8-bit microcontroller rather than an AEC-Q100-qualified automotive device. Terminal finish is identified as tin with JESD classification e3, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.