Microchip Technology

MCP3422A1-E/MS - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip

MPN: MCP3422A1-E/MS ✓ Aktif
2.048 V Vdss 8-MSOP Package
MOQ: 1 |

MCP3422A1-E/MS Genel Bakış

The Microchip Technology MCP3422A1-E/MS is a two-channel, 18-bit delta-sigma analog-to-digital converter operating at up to 4 samples per second, with differential inputs and an 8-MSOP package. Its key specifications include 18-bit resolution, a 2.048 V internal reference, a 2.7 V to 5.5 V supply range, and a two-wire I2C-compatible serial interface.

An ADC is a mixed-signal semiconductor that converts continuously varying analog voltages into digital codes for processing, measurement, storage, or control. The MCP3422 belongs to the delta-sigma ADC family within the broader ADC and data-conversion IC hierarchy. Delta-sigma conversion is especially useful when low noise, high effective resolution, and simple analog front ends are more important than very high conversion speed.

The MCP3422A1-E/MS provides two differential input channels and converts analog inputs to digital codes with up to 18 bits of resolution. Its onboard precision 2.048 V reference establishes a differential input range of plus or minus 2.048 V. The device operates from a single 2.7 V to 5.5 V supply and supports standard, fast, and high-speed I2C-compatible modes, giving designers flexibility in bus speed and system partitioning.

The converter's sigma-delta architecture is suited to slow-changing sensor signals rather than high-frequency waveform acquisition. At 4 samples per second, it prioritizes noise rejection and resolution for pressure, temperature, chemical, potentiometric, and bridge-based measurements. Its two-channel architecture allows paired or differential sensing while keeping the analog front end compact, and its MSOP-8 form factor supports space-constrained instrumentation.

Typical applications include industrial process monitoring, portable sensor instrumentation, battery-powered measurement systems, laboratory data acquisition, and low-rate environmental sensing. Differential inputs are particularly useful when measuring small signals stacked on larger common-mode voltages or when reducing errors from ground offsets and coupled noise.

Designers should place input filtering and protection close to the converter, route analog and digital signals carefully, and use suitable bypass capacitors around the supply pins. Because conversion is intentionally low-rate, the device should not be selected for sampling fast transients or wideband waveforms unless the complete signal chain can deliver the required bandwidth and conversion performance.

This product record combines the manufacturer's converter specifications with package, sourcing, drop-in comparison, and design guidance for engineers evaluating the MCP3422A1-E/MS. It also highlights the practical distinction between low-noise precision conversion and high-speed data acquisition so the correct ADC architecture can be selected for the measurement task.

Drop-in alternatifler için MCP3422A1-E/MS — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MCP3422A5-E/MS

✅ Yerleştirme
📦 8-MSOP
Uses the A5 gain or operating-mode variant within the same 18-bit dual-channel MCP3422 family and 8-MSOP footprint; exact numerical variation is .

📋 Katalogda Olmayan Referans Alternatifi

MCP3422A0-E/MS

✅ Yerleştirme
Microchip Technology
📦 8-MSOP
Delta-sigma (ΔΣ) · Up to 18 bits · 2 channels · 2 differential inputs · 3.75 samples/s · 2.7 V to 5.5 V · 145 µA · 2.048 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP3422A1T-E/MS

✅ Yerleştirme
📦 8-MSOP
Retains the A1 device identity and 8-MSOP package while changing the ordering suffix, with electrical differences of 0%; exact ordering and packaging interpretation is .

📋 Katalogda Olmayan Referans Alternatifi

MCP3422A1-E/MS Maksimum Değerlendirmeler & Elektriksel Özellikler

Çözünürlük 18 bits
Input Channels 2 channels
Input Configuration Differential
Converter Architecture Delta-sigma (Delta-Sigma)
Maximum Conversion Rate 4 samples per second
Internal Reference Voltage 2.048 V
Differential Input Range Plus or minus 2.048 V
Supply Voltage Range 2.7 V to 5.5 V
Digital Interface Two-wire I2C-compatible serial interface
I2C Supported Modes Standard 100 kHz, fast 400 kHz, and high-speed 3.4 MHz modes
İşletim Sıcaklığı Aralığı -40 degrees C to +125 degrees C
Paket 8-MSOP
Montaj Türü Surface mount

MCP3422A1-E/MS 8-msop Pin Yapısı Kılavuzu

MCP3422A1-E/MS (8-msop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-msop paket pin çizelgesi için MCP3422A1-E/MS

Ayrıntılı pin çıkış verisi mevcut değil: MCP3422A1-E/MS.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MCP3422A1-E/MS için uygundur 6 uygulamas: Industrial Process Monitoring, Portable Sensor Instrumentation, Environmental Monitoring, Laboratory Data Acquisition, Battery-Powered Measurement, Precision Bridge Sensor Interface.

🏭

Industrial Process Monitoring

The MCP3422A1-E/MS is appropriate for slow industrial measurements such as pressure, temperature, level, and chemical sensor outputs. Its two differential channels can accept small sensor signals while rejecting common-mode voltage, and the 18-bit resolution preserves fine code-level detail when the input is scaled into the plus or minus 2.048 V differential range. Operating from 2.7 V to 5.5 V simplifies integration near sensors and remote acquisition nodes. The 4 sample-per-second rate is well matched to slowly changing process variables, although the analog front end still needs surge protection, filtering, calibration, and careful grounding.

📱

Portable Sensor Instrumentation

The MCP3422A1-E/MS fits portable and field-measurement equipment that records low-frequency sensor data from a single low-voltage supply. Its 2.7 V minimum supply voltage supports compact battery-powered designs, while the 18-bit delta-sigma conversion provides high effective resolution without a high-speed sampling system. Two differential inputs make it practical for paired probes or bridge sensors, and the 2.048 V onboard reference provides a defined conversion scale. Designers should account for the 4 sample-per-second acquisition rate and include suitable input filtering, protection, and a host interface capable of supporting the selected I2C mode.

🧩

Environmental Monitoring

The MCP3422A1-E/MS can digitize outputs from humidity, gas, pH, and conductivity sensors whose signals change relatively slowly. Its differential input arrangement helps reject environmental electrical noise and ground-potential differences common in distributed sensing networks. The 18-bit resolution can reveal small sensor changes after the signal is conditioned into the converter's plus or minus 2.048 V differential range. Because the conversion rate is 4 samples per second, the device is best suited to periodic logging rather than high-speed transient analysis. Use low-leakage input protection and stable filtering to preserve measurement accuracy between updates.

⚡

Laboratory Data Acquisition

The MCP3422A1-E/MS is useful for laboratory instruments that measure dc or low-frequency analog quantities with high resolution and low conversion speed. Two differential channels allow the acquisition system to compare a sensor against a reference or capture complementary bridge outputs. The onboard 2.048 V reference and 18-bit conversion establish a precise digital code range, while the I2C-compatible interface simplifies connection to an embedded controller. The 4 sample-per-second rate supports stepped or slowly swept measurements, not high-bandwidth scopes, and calibration should account for reference accuracy, offset error, gain error, and analog-front-end settling.

🔋

Battery-Powered Measurement

The MCP3422A1-E/MS supports low-power battery-powered instruments because it accepts a single supply from 2.7 V to 5.5 V and performs measurements at a controlled 4 samples per second. A system can leave the converter idle between updates when its operating modes allow it, reducing unnecessary activity in remote nodes. Two channels reduce the number of separate converters needed for paired measurements, while the 18-bit delta-sigma architecture favors low-noise resolution. Power-budget calculations should include the converter's actual operating and standby currents, regulator losses, sensor excitation, and communication activity rather than relying on converter headline specifications alone.

⚖️

Precision Bridge Sensor Interface

The MCP3422A1-E/MS is appropriate for resistive bridge sensors such as strain, load-cell, and pressure elements when the conditioned bridge output is differential and slow-changing. Two differential channels can support redundant sensing or paired bridge measurements, while the 18-bit resolution improves sensitivity to small fractional changes in bridge voltage. The plus or minus 2.048 V differential range and 2.048 V internal reference simplify fixed-scale excitation schemes. Layout must preserve symmetry between bridge legs, minimize converter and excitation ground-potential error, and provide filtering that does not introduce excessive settling delay at the 4 sample-per-second conversion rate.

Önerilen Ürünler Özeti

MCP3422A5-E/MS Related MCP3422 dual-channel ADC variant Kullanıldığı Yer: Industrial Process Monitoring, Portable Sensor Instrumentation, Laboratory Data Acquisition, Battery-Powered Measurement, Precision Bridge Sensor Interface MCP3422A1T-E/MS Same A1 converter family ordering option Kullanıldığı Yer: Industrial Process Monitoring, Environmental Monitoring, Battery-Powered Measurement MCP3422A0-E/MS Microchip Technology Kullanıldığı Yer: Portable Sensor Instrumentation, Laboratory Data Acquisition, Precision Bridge Sensor Interface MCP3422A1-E/MC Related MCP3422 dual-channel converter in a different package Kullanıldığı Yer: Environmental Monitoring
What is the MCP3422A1-E/MS?
The MCP3422A1-E/MS is a Microchip Technology two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, a 2.048 V internal reference, and an I2C-compatible interface. According to the Microchip manufacturer datasheet, it converts at up to 4 samples per second and is packaged in 8-MSOP. Its architecture is intended for precision, low-noise measurement of relatively slow sensor signals rather than high-speed waveform acquisition.
What is the conversion speed of MCP3422A1-E/MS?
The MCP3422A1-E/MS converts analog inputs at up to 4 samples per second. According to the Microchip manufacturer datasheet, this low conversion rate supports high-resolution delta-sigma measurement of slowly changing signals. It is therefore suitable for pressure, temperature, chemical, and potentiometric sensors, but it is not intended for sampling high-frequency waveforms or fast transients.
What voltage range can MCP3422A1-E/MS measure?
The MCP3422A1-E/MS supports a differential input range of plus or minus 2.048 V around its onboard 2.048 V reference. According to the Microchip manufacturer datasheet, the converter also operates from a 2.7 V to 5.5 V single supply. Input conditioning may be required when the source signal exceeds this range, has a large offset, or requires scaling to use more of the converter's available resolution.
Where can I download the MCP3422A1-E/MS datasheet PDF?
The MCP3422A1-E/MS datasheet PDF is available from Microchip's official product-document server at https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/22088c.pdf. The document contains the MCP3422, MCP3423, and MCP3424 family information, including the MCP3422A1-E/MS pin assignments, electrical characteristics, internal-reference details, and recommended application circuits.
Where can I find the MCP3422A1-E/MS pinout?
The MCP3422A1-E/MS pinout is shown in the manufacturer datasheet's pin-description and package drawings for the 8-MSOP package. Use the numbered top-view drawing when assigning PCB pads, and confirm the exposed versus non-exposed package construction used by the ordered ordering code. The component is an 8-MSOP device, so the associated package-diagram asset should also be checked against the physical footprint before fabrication.
What are the key specifications of MCP3422A1-E/MS that engineers should know?
The MCP3422A1-E/MS combines 18-bit resolution, two differential input channels, a 4 sample-per-second conversion rate, and a 2.048 V internal reference in an 8-MSOP package. According to the Microchip manufacturer datasheet, its single-supply operating range is 2.7 V to 5.5 V, and its two-wire interface supports standard, fast, and high-speed I2C-compatible modes. These parameters make it a precision ADC for slow sensor signals.
MCP3422A1-E/MS vs MCP3422A5-E/MS - which is better?
The MCP3422A1-E/MS and MCP3422A5-E/MS are both Microchip 18-bit, dual-channel delta-sigma converters in the same MSOP package family, but their A1 and A5 identifiers distinguish different device variants. According to the Microchip manufacturer datasheet and the published family comparison, detailed gain, noise, and operating-mode ratings should be checked for the exact suffix. Choose the variant whose specified characteristics match the measurement accuracy and speed required by the design.
MCP3422A1-E/MS vs MCP3422A0-E/MS - what is the difference?
The MCP3422A1-E/MS and MCP3422A0-E/MS belong to the same Microchip MCP3422 dual-channel 18-bit delta-sigma ADC family and use the same MSOP package designation in their ordering codes. Their A1 and A0 identifiers denote different device variants rather than identical regional markings. According to the Microchip manufacturer datasheet, consult the variant-specific tables for gain, conversion-rate, and noise details before treating one as a functional substitute.
When should I choose MCP3422A1-E/MS over another MCP3422 variant?
Choose the MCP3422A1-E/MS when the design requires the exact A1 variant of Microchip's dual-channel, 18-bit delta-sigma converter family in an 8-MSOP package. Its 4 sample-per-second rate suits slow sensor measurements, while the onboard 2.048 V reference simplifies ratiometric or fixed-scale designs. Select another variant only after confirming that its timing, gain, noise, and operating-mode requirements are preferable.
Is MCP3422A1-E/MS suitable for industrial sensor measurement?
The MCP3422A1-E/MS is suitable for many industrial sensor-measurement circuits because it offers two differential inputs, 18-bit resolution, and an operating temperature range of -40 degrees C to +125 degrees C. According to the Microchip manufacturer datasheet, its 4 sample-per-second conversion rate is appropriate for slow-changing quantities such as temperature, pressure, and chemical sensor outputs. Proper input protection, filtering, grounding, and calibration remain necessary.
What can replace MCP3422A1-E/MS?
A drop-in replacement must use the same 8-MSOP footprint, preserve the two-channel differential input arrangement, and meet the required resolution, conversion-speed, reference, supply, and interface specifications. The closest documented family candidates are the MCP3422A5-E/MS and MCP3422A0-E/MS, while MCP3422A1T-E/MS shares the MS designation. Confirm the exact pinout and electrical tables in the manufacturer datasheet before approving any substitution.
Can MCP3422A5-E/MS replace MCP3422A1-E/MS?
The MCP3422A5-E/MS can be considered as a board-level drop-in candidate because it is another MCP3422 family member offered in the 8-MSOP package. It must not be approved solely from the package and family name: check differential input limits, conversion rate, gain, noise, reference behavior, I2C address, and timing in the manufacturer datasheet. The exact A1 variant remains preferable when all original requirements must be preserved without reinterpretation.
Is there a cross-brand drop-in replacement for MCP3422A1-E/MS?
No cross-brand drop-in replacement is established by the available manufacturer and distributor records. A second-source candidate would need to prove the same 8-MSOP land pattern, two differential input channels, 18-bit-class resolution, compatible I2C behavior, and closely matching accuracy and conversion characteristics. Until those requirements are verified, treat the documented Microchip MCP3422 variants as the only supported drop-in candidates for this component.
Where can I buy MCP3422A1-E/MS and check its lead time?
Use the Request a Quote form on this page to ask for MCP3422A1-E/MS availability, current lead time, order quantity, and package availability. The form allows the request to be matched to the exact MCP3422A1-E/MS ordering code and 8-MSOP package. Because quote-based sourcing can change, request the current commercial details directly rather than relying on an older catalog listing.
Is MCP3422A1-E/MS in stock?
Current MCP3422A1-E/MS inventory should be confirmed through the Request a Quote form on this page. Stock status for a precision converter can vary by quantity, package, and regional supply, so an older listing is not a reliable current inventory guarantee. Include the intended production quantity and delivery schedule with the request to obtain an actionable supply confirmation.
What is the price of MCP3422A1-E/MS?
Use the Request a Quote form on this page for the current MCP3422A1-E/MS commercial price. The form supports quantity-based purchasing and is the appropriate route for a quote-based supply operation. Quote responses can reflect order quantity, package form, component availability, and delivery requirements, so the final commercial terms should be confirmed for the specific procurement request.

Mühendislik referans verileri: MCP3422A1-E/MS — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MCP3422A1-E/MS for a compact, dual-channel precision measurement design that needs up to 18-bit resolution, differential inputs, and a 4 sample-per-second conversion rate from a 2.7 V to 5.5 V supply. The onboard 2.048 V reference and plus or minus 2.048 V differential range are useful for slow industrial, environmental, bridge-sensor, and laboratory measurements. MCP3422A5-E/MS is the closest documented A5 family alternative and should be selected when its variant-specific gain, noise, or operating-mode characteristics better match the design. MCP3422A0-E/MS serves the same footprint and channel architecture when its A0 characteristics are preferable. MCP3422A1T-E/MS retains the A1 designation and can be considered when its exact ordering interpretation meets procurement requirements. No cross-brand drop-in candidate has been established. In every case, verify the exact pinout, electrical limits, I2C address, conversion timing, reference behavior, and calibration requirements in the manufacturer datasheet before releasing a replacement to production.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP3422A5-E/MS MCP3422A0-E/MS MCP3422A1T-E/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Resolution 18 bits 18 bits 18 bits 18 bits
Input Channels 2 channels 2 channels 2 channels 2 channels
Converter Architecture Delta-sigma Delta-sigma Delta-sigma Delta-sigma
Internal Reference Voltage 2.048 V 2.048 V 2.048 V 2.048 V
Differential Input Range Plus or minus 2.048 V Plus or minus 2.048 V Plus or minus 2.048 V Plus or minus 2.048 V
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Digital Interface Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible
Variant Identifier A1 A5 A0 A1T

Ana Farklılayıcılar

  • High nominal resolution in a compact dual-channel converter (karşılaştırma:MCP3422A5-E/MS)
  • Two differential channels in an 8-MSOP footprint (karşılaştırma:MCP3422A0-E/MS)
  • Defined 2.048 V differential measurement range (karşılaştırma:MCP3422A1T-E/MS)

Tasarım Notları

Route the two differential input pairs as compact, symmetric paths and keep switching-node or high-current supply traces away from the converter. Place input protection and filtering components close to the associated pins so unwanted energy is diverted before reaching the ADC. For bridge sensors, match input trace geometry and component placement to reduce conversion of common-mode noise or supply gradients into differential error.

The MCP3422A1-E/MS operates from a single 2.7 V to 5.5 V supply. Place the manufacturer's recommended bypass capacitance at the supply pins and provide a low-impedance return path to the device ground. Because the 2.048 V onboard reference defines the conversion scale, reference noise, supply ripple, and analog ground movement can affect accuracy. Keep the reference and input return paths away from switching-converter return currents.

The 4 sample-per-second conversion rate is suited to slow sensor signals, so the analog input network can generally use effective low-pass filtering to suppress broadband noise. Confirm that filter settling is compatible with the selected conversion cycle and operating mode. Anti-aliasing design must also account for the converter's documented digital filter and timing rather than relying only on an arbitrary RC corner frequency.

Do not select this converter for high-frequency waveform measurement merely because its nominal resolution is 18 bits. Its 4 sample-per-second maximum rate and delta-sigma filtering define a different bandwidth relationship from a conventional SAR converter. Also verify differential input polarity, common-mode limits, source impedance, and I2C addressing in the manufacturer datasheet before finalizing the analog and digital interfaces.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The exact MCP3422A1-E/MS ordering code has no direct compliance declaration in the cited product record. Compliance fields remain unknown rather than being transferred from a different ordering suffix.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MCP3422A1-E/MS datasheet MCP3422A1-E/MS pinout MCP3422A1-E/MS datasheet pdf MCP3422A1-E/MS specifications MCP3422A1-E/MS equivalent MCP3422A1-E/MS replacement MCP3422A1-E/MS cross reference MCP3422A1-E/MS price MCP3422A1-E/MS stock MCP3422A1-E/MS application circuit MCP3422A1-E/MS vs MCP3422A5-E/MS Microchip MCP3422A1-E/MS MCP3422 18-bit dual channel ADC MCP3422A1-E/MS schematic

İlgili Bileşenler ve Terimler

Microchip Technology MCP3422A1-E/MS MCP3422A5-E/MS MCP3422A0-E/MS MCP3422A1T-E/MS MCP3422 MCP342X analog-to-digital converter ADC delta-sigma ADC mixed-signal IC data converter differential input I2C internal reference 2.048 V reference 18-bit resolution 8-MSOP MSOP package family surface-mount package industrial process monitoring bridge sensor environmental monitoring precision measurement
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle